0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: SYSTEM 12/8
Quam's SYSTEM 12/8 is a 24" x 24" lay-in ceiling speaker tile 8" O.D with an 8 ohm nominal impedance.
Key Features:
Overview:
Quam SYSTEM 12/8 24" x 24" Lay-In Ceiling Tile Speaker 8 Ohm
The SYSTEM 12/8 by Quam is a complete loudspeaker assembly with an 8" O.D., full range loudspeaker, perforated steel baffle, and integral molded fiber enclosure. Nominal impedance is 8 ohms. The SYSTEM 12/8 is UL Listed 1480- (UEAY, UAEY7-Canada) when installed in accordance with supplied installation instructions, requirements of NEC and AHJ. Intended use in an indoor environment, mounted parallel to floor plane in a 24" wide suspended ceiling tile grid for signal tones, voice, and music. Made in Chicago, USA.
Specifications: Average sensitivity: 92 dB 1W/1m Power rating: 12 watts RMS Max. system output: 103 dB, 12W/1m Magnet type: weight: BeFe ceramic, 4.8 oz. nominal Frequency response: 65 Hz - 17 kHz Nominal coverage angle: 100° included angle, -6 dB/ 2 kHz, half space Audio connection: 7" long labeled, tinned wires, pre-cut.
Audio distribution systems, especially those commonly used in department stores, warehouses, restaurants, etc., require that many loudspeakers be driven from a single audio amplifier over long runs of speaker wire. The "constant voltage" or "high impedance distribution" audio systems can be complex to understand at first, however, provides many advantages. Learn how to design your own 70-volt or 25-volt loudspeaker system.
Specification:
Manuals & Resources:
Quam's SYSTEM 12/8 is a 24" x 24" lay-in ceiling speaker tile 8" O.D with an 8 ohm nominal impedance.
Key Features:
- 24" x 24" lay-in speaker tile
- 8 ohm nominal impedance
- For indoor environments
- Program material: Signal tones, voice, and music
- Made in Chicago, USA
Overview:
Quam SYSTEM 12/8 24" x 24" Lay-In Ceiling Tile Speaker 8 Ohm
The SYSTEM 12/8 by Quam is a complete loudspeaker assembly with an 8" O.D., full range loudspeaker, perforated steel baffle, and integral molded fiber enclosure. Nominal impedance is 8 ohms. The SYSTEM 12/8 is UL Listed 1480- (UEAY, UAEY7-Canada) when installed in accordance with supplied installation instructions, requirements of NEC and AHJ. Intended use in an indoor environment, mounted parallel to floor plane in a 24" wide suspended ceiling tile grid for signal tones, voice, and music. Made in Chicago, USA.
Specifications: Average sensitivity: 92 dB 1W/1m Power rating: 12 watts RMS Max. system output: 103 dB, 12W/1m Magnet type: weight: BeFe ceramic, 4.8 oz. nominal Frequency response: 65 Hz - 17 kHz Nominal coverage angle: 100° included angle, -6 dB/ 2 kHz, half space Audio connection: 7" long labeled, tinned wires, pre-cut.
Constant Voltage (70-Volt) Audio Systems
Audio distribution systems, especially those commonly used in department stores, warehouses, restaurants, etc., require that many loudspeakers be driven from a single audio amplifier over long runs of speaker wire. The "constant voltage" or "high impedance distribution" audio systems can be complex to understand at first, however, provides many advantages. Learn how to design your own 70-volt or 25-volt loudspeaker system.
Specification:
Product Details | |
|---|---|
| Brand | Quam |
| Model | SYSTEM 12/8 |
| Part Number | 244-3138 |
| UPC | 844632096792 |
| Unit of Measure | Each |
| Weight | 7 |
Product Specifications | |
|---|---|
| Input Rating | 8 ohm |
| Mounting Style | Drop-in Tile |
| Woofer Diameter | 8" |
| Special Features | Enclosed Back-UL1480 |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category