skip to footer block
DRA Qualtech DWRR26.0MM 26.00mm HSS Straight Shank Chucking Reamer P13562225DRA-DWRR2-5MM https://cdnimages.opentip.com/full/DRA/DRA-DWRR2-5MM.jpg Qualtech DWRR26.0MM 26.00mm HSS Straight Shank Chucking Reamer Manufacturer Part Number: dwrr2.5mmDesigned for reaming in most materials like wood, metal and steelStraight-flute is recommended for most general purpose reamingPointed with a 45° chamferSize :2.50mmFlute Length :7/8\"Overall Length :3-1/2\"Material :High Speed SteelFinish :Uncoated (Bright)Style :ChuckingShank Type :Round 13562225 887861145305 0.7000lbs 0.00 0.00 0.00
Qualtech
10.75 2027-08-17 30 In Stock
customer review - by , November 11, 2025
5/ 5stars
Worth to keep when needed If you are on firearm building.
customer review - by , June 6, 2025
4/ 5stars
I really didn't think about what the quality of a 20$ reamer would be compared to the other cheapest which was $50. I really hope the picture quality is as good as it was when I took it through a lens.. If it's not, the cutting edge has been ground with what looks like an asphalt wheel. I could be wrong about this, but, I think when they cut the reamer they do so at an ever so slight angle so its not the same width the whole length of cut. The tip is smaller and then gets slightly wider. This is the opposite, the tip of the reamer measures at .2435 (bought it as .2430- so its already oversize) the end of the cut measures at .2425". Moral of story- if you need a finishing reamer to finish a hole... buy one that's a but more money. It's also not new, its a recycled reamer, not sure if its even straight.
customer review - by , March 3, 2025
5/ 5stars
Worked perfectly.
customer review - by , March 3, 2025
5/ 5stars
Began reaming ok, but a bit of binding and it bent immediately without much force.
customer review - by , October 10, 2024
5/ 5stars
Works as it should A.
customer review - by , September 9, 2024
5/ 5stars
I use this to ream the necks of any case that uses .308 projectiles. With all trimmed to same length after sizing, reamed to .306 and finished with a factory-crimp die, neck tension is consistent and groups as tight as I can get them. Also have a .2620 that I use for 6.5cm/.264
customer review - by , September 9, 2024
5/ 5stars
I needed this to make a tool for adjusting the shifter fork spacing on a Harley 4 speed transmission.
customer review - by , April 4, 2024
5/ 5stars
Arrived quickly and as advertised.
customer review - by , March 3, 2024
5/ 5stars
This .505 reamer measures correct per my micrometer and works well. I have only used it on soft brass so I can't comment on it's durability on hard metals.It didn't matter to me, but note that this .505 reamer is a bright steel finish, not black oxide as some of the photos make it appear.
customer review - by , January 1, 2024
5/ 5stars
Quick delivery and made perfect hopes. I'm happy with this tool.

Qualtech DWRR2.5MM 2.50mm HSS Straight Shank Chucking Reamer

stars Rating 5 | 26 reviews
Brand Qualtech
Shop more from DRA

30 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

You may also like

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with DRA-, and you can get free shipping for an order of over  $350.00  consisting of only DRA- series products.

Product Description

Manufacturer Part Number: dwrr2.5mm

  • Designed for reaming in most materials like wood, metal and steel
  • Straight-flute is recommended for most general purpose reaming
  • Pointed with a 45° chamfer


  • warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Customer Reviews
    By WGI
    Date: June 25, 2025
    I really didn't think about what the quality of a 20$ reamer would be compared to the other cheapest which was $50. I really hope the picture quality is as good as it was when I took it through a lens.. If it's not, the cutting edge has been ground with what looks like an asphalt wheel. I could be wrong about this, but, I think when they cut the reamer they do so at an ever so slight angle so its not the same width the whole length of cut. The tip is smaller and then gets slightly wider. This is the opposite, the tip of the reamer measures at .2435 (bought it as .2430- so its already oversize) the end of the cut measures at .2425". Moral of story- if you need a finishing reamer to finish a hole... buy one that's a but more money. It's also not new, its a recycled reamer, not sure if its even straight.
    Rating: 4 stars [4 of 5 Stars!]
    By Paul F.
    Date: January 02, 2022
    This tool worked fine for my needs, which was reaming an undersized pair of 5/32 holes in some black, tactical aluminum. The fit to the matching pins I used was great. For a cheap tool that gets used occasionally, it's great.
    Rating: 4 stars [4 of 5 Stars!]
    Items 1 - 2 of 2 reviews
     1