0 reviews
Be the first to review this item!
Product Description
Price is for each.
Manufacturer Part Number: 20-S13ATA-PE4-NW-T-GG
Antimicrobial sleeves featuring ATA® Technology; a cool wearing HPPE blend are available in wide, standard and narrow sleeves to provide a custom fit. Wide, non-binding top of arm elastic is comfortable to wear and helps to keep sleeves in place. Cuff is also color coded to the width of the sleeve; blue/gold for wide, black/white for standard, and green/gold for narrow. Color coded hem identifies ANSI cut protection score so safety managers and workers can quickly confirm that they are wearing the appropriate cut protection for the application.
Performance Data
ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection.
New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9.
The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.
The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.
Documents & Downloads
Made in the U.S.A., Kut Gard® seamless knit gloves and sleeves are designed to provide the highest possible cut protection for the food industry. Because they comply with both the US and Canadian standards for food contact, Kut Gard® gloves and sleeves blended with antimicrobial fibers can be used for operations where direct, indirect, and incidental contact with food may occur.
Antimicrobial sleeves featuring ATA® Technology; a cool wearing HPPE blend are available in wide, standard and narrow sleeves to provide a custom fit. Wide, non-binding top of arm elastic is comfortable to wear and helps to keep sleeves in place. Cuff is also color coded to the width of the sleeve; blue/gold for wide, black/white for standard, and green/gold for narrow. Color coded hem identifies ANSI cut protection score so safety managers and workers can quickly confirm that they are wearing the appropriate cut protection for the application.
- Proprietary ATA® Technology with HPPE fiber blend provides ANSI A4 cut protection and outstanding wearer comfort.
- The lightweight 13-gauge HPPE fiber blend is cool wearing and is more comfortable than other engineered fibers.
- Narrow width sleeve with comfortable and non-binding 5" green and gold elastic cuff to help keep sleeves stay in place.
- Three widths are available: wide with blue and gold cuff, standard with black and white cuff and narrow with green and gold cuff.
- Antimicrobial fiber helps to prevent odor causing bacterial growth.
- Made in the USA
Performance Data
- Cut Level: A4
Test Method: ASTM F2992-15 - Puncture Level: 2
Test Method: ASTM F1342 - Abrasion Level: 3
Test Method: ASTM D3884-09
ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection.
- Cut Level: A4
- Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9.
- Abrasion Level: 3
- Test Method: ASTM D3884-09
The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.
- Puncture Level: 2
- Test Method: ASTM F1342
The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.
Documents & Downloads
Made in the U.S.A., Kut Gard® seamless knit gloves and sleeves are designed to provide the highest possible cut protection for the food industry. Because they comply with both the US and Canadian standards for food contact, Kut Gard® gloves and sleeves blended with antimicrobial fibers can be used for operations where direct, indirect, and incidental contact with food may occur.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
This item is non-returnable.
Custom Printing & Artwork
This item can be imprinted with a company's name, logo or message. We've got the solution that will exceed your expectations and fit within your budget. Let us help with your needs of custom production, large or small. To discuss your specific needs please Contact Us. If you email, please include the following information to speed up the process: your company name and contact information, logo, order quantity, delivery deadline, and specific needs.
How do I send my artwork?
Click here for all you need to know about sending your logo or artwork to us.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category