KENT 56407431 Motor 36Vdc .75Hp

Bought this replacement for my son razor moped scooter, works great!!!

This is a solid motor and runs good on 12v also if you need lower RPMs (only draws 1 amp at 12v with no load). If you intend to put a timing pulley, pinion or any other kind of mechanical interface on this shaft instead of using the chain sprocket that comes on it, then at first it may appear that the usable 8mm portion of the shaft is a miniscule 3.5mm long. Luckily this is not the case, there is just a bushing that you need to remove to gain access to the full 8mm shaft length. Once the bushing is removed you have 21mm of usable shaft (the portion which does not have threads at the end).

I purchased 2 motors, and they both work really good. The bad part was the poor packaging. The red wire on one motor was badly pinched almost looked like the wire was broken inside of the insulation.

As described..no issues.

I liked how quickly I got my order after placing it. Interchangeable with other equipment is another plus. Thank you for a great product!

Bought this motor as a direct replacement for the 24 VDC motor in a Razor Pocket Mod scooter. Windings on the old motor's stator had burned out and needed replacing. This motor is an exact replacement, so fitment was perfect and the scooter drives once more.