5 out of 5
Dayton Audio DS90-8 3" Designer Series Full-Range Driver 8 Ohm
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: DS90-8
The Dayton Audio Designer Series DS90-8 3" driver adds extended high frequency response to its outstanding mini-woofer performance.
Key Features:
Overview:
Dayton Audio DS90-8 3" Designer Series Full-Range Driver 8 Ohm
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies-without exceeding Xmax.
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
Suggested enclosures:
Sealed cabinet:Type: Acoustic suspension (alpha 3.5), Qtc 0.69; Size (internal) including volume displaced by driver: 0.03 ft³; Internal cabinet dimensions (golden ratio): 6-1/4"H x 3-7/8"W x 2-3/8"D. Typical results:3 dB down-point (f3): 158 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length - gap height) / 2)): 90 Hz.
Vented cabinet:Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.12 ft³; Internal cabinet dimensions (golden ratio): 7-3/4"H x 4-3/4"W x 3"D; Port dimensions (with flared exit): 1" dia. x 6"L. Typical results:3 dB down-point (f3): 73 Hz; Tuning frequency (fb): 69 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length - gap height) / 2)): 70 Hz.
Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling.
Specification:
Manuals & Resources:
The Dayton Audio Designer Series DS90-8 3" driver adds extended high frequency response to its outstanding mini-woofer performance.
Key Features:
- Cosmetic frame with low profile lip, designed for front mounting-no countersinking required!
- Coated paper cone, half roll rubber surround for durability and accurate reproduction
- Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet
- Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers
- Vented pole piece for minimized power compression and maximized reliability
- Generous Xmax capability encourages use of moderate bass boost to tailor the response
- Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators
Overview:
Dayton Audio DS90-8 3" Designer Series Full-Range Driver 8 Ohm
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies-without exceeding Xmax.
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
Suggested enclosures:
Sealed cabinet:Type: Acoustic suspension (alpha 3.5), Qtc 0.69; Size (internal) including volume displaced by driver: 0.03 ft³; Internal cabinet dimensions (golden ratio): 6-1/4"H x 3-7/8"W x 2-3/8"D. Typical results:3 dB down-point (f3): 158 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length - gap height) / 2)): 90 Hz.
Vented cabinet:Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.12 ft³; Internal cabinet dimensions (golden ratio): 7-3/4"H x 4-3/4"W x 3"D; Port dimensions (with flared exit): 1" dia. x 6"L. Typical results:3 dB down-point (f3): 73 Hz; Tuning frequency (fb): 69 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length - gap height) / 2)): 70 Hz.
Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling.
Specification:
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DS90-8 |
| Part Number | 295-422 |
| UPC | 844632095375 |
| Unit of Measure | Each |
| Weight | 1.2 |
Product Specifications | |
|---|---|
| Nominal Diameter | 3" |
| Bolt Circle Diameter | 3.27 |
| Power Handling (RMS) | 20 Watts |
| Power Handling (MAX) | 40 Watts |
| Impedance | 8Ω |
| Frequency Response | 80 to 13,000Hz |
| Sensitivity | 84.1dB 2.83V/1m |
| Voice Coil Diameter | 0.8" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 81.4Hz |
| DC Resistance (Re) | 6.3Ω |
| Voice Coil Inductance (Le) | 0.56mH |
| Mechanical Q (Qms) | 2.19 |
| Electromagnetic Q (Qes) | 0.53 |
| Total Q (Qts) | 0.43 |
| Compliance Equivalent Volume (Vas) | 0.05ft³ |
| Mechanical Compliance of Suspension (Cms) | 1.02mm/N |
| BL Product (BL) | 4.76T·m |
| Diaphragm Mass Inc. Airload (Mms) | 3.8g |
| Maximum Linear Excursion (Xmax) | 2.5mm |
| Surface Area of Cone (Sd) | 31.2cm² |
Materials of Construction | |
|---|---|
| Cone Material | Coated Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 3.63" |
| Baffle Cutout Diameter | 2.76" |
| Depth | 1.76" |
| # Mounting Holes | 4 |
Parts Express Staff Recommended Enclosure Volume | |
|---|---|
| Sealed Volume | 0.04ft³ |
| Sealed F3 | 175Hz |
| Vented Volume | 0.06ft³ |
| Vented F3 | 79Hz |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By A Customer
Date: March 26, 2018
My father built speakers for Rockford Fosagate for decades. He was very loyal to them. But these I just knew he would approve of. Nice suspension, oversized magnet for a driver it's size, and they sound as good as they look. Excellent
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 1 of 1 reviews
1