skip to footer block
CED CE Distribution S T235 Precision Router Base Support for Dremel Tool P7254667CED-S-T235 https://cdnimages.opentip.com/full/CED/CED-S-T235.jpg CE Distribution S T235 Precision Router Base Support for Dremel Tool Manufacturer Part Number: S-T235A stable and versatile way to support your Dremel tool.This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.Excellent controlEasy installationAccurate freehand routingOperation information: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel\'s cutting depth by .035\"\" (.889mm). You can route an inlay cavity that\'s precisely compensated for the thickness of the pearl and glue, for less sanding later.Tall twin handles give you excellent control for freehand routing, and you get a good view of your work. There\'s even a built-in nozzle for attaching a mini air pump to continuously blow away the dust-you\'ll route inlay cavities more precisely, for a better fit requiring less filler.See S-T256 for additional routing jig.3/4-12 thread fitsDremel 4000Dremel 400XPRDremel ProfessionalDremel MultiPro™most corded Dremel modules produced after 1986Black & Decker Wizard™Black & Decker RTX™Measurements and Specs Threading3/4-12 Packaging Dimensions3.741 in. × 3.391 in. × 2.933 in. Weight (Packaging)0.47 lbs. 7254667 609722166416 0.4700lbs 0.00 0.00 0.00
CE Distribution
53.9400 2026-04-26 In Stock
customer review - by , June 6, 2024
5/ 5stars
It fits a Foredom threaded handpiece perfectly, as well as a Dremel with the threaded nose (they screw into the crossbar). It requires assembly but it's easy to figure out: remove the two little screws with the included hex wrench, insert them through the base plate into the countersunk recesses, and into the threaded vertical supports. You can add a dot of blue Loctite to each screw if you like. When you assemble it, pay attention to the little air tube sticking out of the crossbar; this is where you can connect an air hose to blow away the chips/dust and keep the work clear of debris. Most techs have the tube pointing to the 'closed' side of the base plate so the hose stays out of the way as they work, looking through the 'open' side of the base plate. To use it, screw the large thumbwheels all the way down. Insert the rotary tool with cutter into the crossbar and snug it in place. Adjust the top thumbscrews to set the depth of cut, and then rotate each large thumbwheel upward to lock the crossbar in place. You're ready to work.
customer review - by , September 9, 2020
5/ 5stars
Nice attachment, worked just like I needed it too.
  »  
  »  
  »  
  »  

CE Distribution S-T235 Precision Router Base - Support for Dremel Tool

stars Rating 5 | 2 reviews
Brand CE Distribution
Shop more from CED
UPC: 609722166416
SKU: CED-S-T235
Price: $53.94
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: S-T235

A stable and versatile way to support your Dremel tool.

This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.

  • Excellent control
  • Easy installation
  • Accurate freehand routing


Operation information: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm). You can route an inlay cavity that's precisely compensated for the thickness of the pearl and glue, for less sanding later.

Tall twin handles give you excellent control for freehand routing, and you get a good view of your work. There's even a built-in nozzle for attaching a mini air pump to continuously blow away the dust-you'll route inlay cavities more precisely, for a better fit requiring less filler.

See S-T256 for additional routing jig.

3/4-12 thread fits

  • Dremel 4000
  • Dremel 400XPR
  • Dremel Professional
  • Dremel MultiPro™
  • most corded Dremel modules produced after 1986
  • Black & Decker Wizard™
  • Black & Decker RTX™


    Measurements and Specs


    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
    Need more information?
    Our staff are available to answer any questions you may have about this item
    Request More Information

    Customer Reviews
    5 out of 5
    see all 2 reviews
    5 stars
    2
    4 stars
    0
    3 stars
    0
    2 stars
    0
    1 stars
    0
    Write a Review
    By Geno
    Date: June 12, 2024
    It fits a Foredom threaded handpiece perfectly, as well as a Dremel with the threaded nose (they screw into the crossbar). It requires assembly but it's easy to figure out: remove the two little screws with the included hex wrench, insert them through the base plate into the countersunk recesses, and into the threaded vertical supports. You can add a dot of blue Loctite to each screw if you like. When you assemble it, pay attention to the little air tube sticking out of the crossbar; this is where you can connect an air hose to blow away the chips/dust and keep the work clear of debris. Most techs have the tube pointing to the 'closed' side of the base plate so the hose stays out of the way as they work, looking through the 'open' side of the base plate. To use it, screw the large thumbwheels all the way down. Insert the rotary tool with cutter into the crossbar and snug it in place. Adjust the top thumbscrews to set the depth of cut, and then rotate each large thumbwheel upward to lock the crossbar in place. You're ready to work.
    Rating: 5 stars [5 of 5 Stars!]
    By scotty d campbell
    Date: September 09, 2020
    Nice attachment, worked just like I needed it too.
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 2 of 2 reviews
     1