CED CE Distribution S T SOUNDHOLE KIT Soundhole Kit Router Base and Jig P13625867CED-S-T-SOUNDHOLE-KIT https://cdnimages.opentip.com/full/CED/CED-S-T-SOUNDHOLE-KIT.jpg CE Distribution S T SOUNDHOLE KIT Soundhole Kit Router Base and Jig Manufacturer Part Number: S-T-SOUNDHOLE-KITThis kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette.Kit includes:The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.Excellent controlEasy installationAccurate freehand routingOperation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel\'s cutting depth by .035\"\" (.889mm). You can route an inlay cavity that\'s precisely compensated for the thickness of the pearl and glue, for less sanding later.Tall twin handles give you excellent control for freehand routing, and you get a good view of your work. There\'s even a built-in nozzle for attaching a mini air pump to continuously blow away the dust-you\'ll route inlay cavities more precisely, for a better fit requiring less filler.3/4-12 thread fits:Dremel 4000Dremel 400XPRDremel ProfessionalDremel MultiPro™most corded Dremel modules produced after 1986Black & Decker Wizard™Black & Decker RTX™The soundhole and rosette routing jig is adjustable from 2\" diameter to 6\" diameter. It includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).Attach the jig to the router base, then mount your Dremel or Foredom tool. Insert the registration pin through the center of the uncut soundhole, and into your work surface. Place the jig on the pin. Set the diameter of cut with the adjusting screw, and lock it down. The router base adjusts the cutting depth. Rout your rosette rings first, then cut out the soundhole. No measurements are currently available for this product. Please if you have any questions. Packaging Information Packaging Dimensions1 in. × 1 in. × 1 in. 13625867 8.7000lbs 0.00 0.00 0.00

CE Distribution

109.8400 2025-12-06 In Stock CE Distribution S T SOUNDHOLE KIT Soundhole Kit Router Base and Jig

CE Distribution S-T-SOUNDHOLE-KIT Soundhole Kit - Router Base and Jig

Brand CE Distribution

Shop more from CED

* Click "Add to Cart" to calculate shipping and delivery time.

Share & Earn 10% Cash Back Best Price in Bulk

Best Price in Bulk!

Because we are a major distributor for some products, we price very aggressively by sacrificing profit margin whenever we sell in bulk. The philosophy to offer quality products with little mark up has created unmatched customer loyalty for some successful membership based stores. Unlike those wholesale to public membership clubs, we do not charge any membership fee. Some merchants offer FREE shipping, but when you buy quantity 10, you pay 10 times total. Essentially, you are paying 10 times on shipping. We don't think that is fair to you. Why? Most of the time, shipping a 10 lb parcel does not cost 10 times of a 1 lb parcel.

Here is an example:

Opentip	Others
Product Price: $8	Product Price: $20
Shipping for quantity 1: $12	Shipping: FREE
Quantity: 10	Quantity: 10
Total Shipping for quantity 10: $18	Total Shipping: FREE
Subtotal: $98 Saving: $102 (51%)	Subtotal: $200

Don't be shy. If you discover any competitor outselling us in a particular product, whenever you purchase in large quantity, please bring it to our attention. Most of the time, we will match or beat their price, and give you a credit. If we lose to a competitor, it is our shame. We then know we need to work harder in sourcing to create values for you.

* Price comparison must be based on comparable brands or models and in bulk quantity purchase.

Optional related products

CE Distribution S-H217 Fuse Block - For GMA / GMD Fuses, Low Profile

$4.22

CE Distribution S-B421 Pedal Box - 7 ?" x 5" x 3", Fits 1590XX,...

$2.95

CE Distribution P-HWAH Enclosure - Wah Pedal Shell and Hardware

$35.82

CE Distribution P-H9310-A Foot - Rubber, 1" x .56", with...

$5.33

CE Distribution P-H254-SINGLE Foot - Chrome Glides, 1" diameter

$1.69

CE Distribution P-H9300-A Foot - Rubber, 1.5" x .75", with...

$5.03

Mod Electronics K-902 Pedal Kit - Mod® Electronics, Seismic /...

$43.25

Mod Electronics K-903 Pedal Kit - Mod® Electronics, The Ring In...

$54.28

Caig S-CD5S-2 DeoxIT® D5 - Caig, Mini Spray, 5%, 24g

$11.34

Carling P-H52-WASHER-LOCK Lock Washer - Carling, Internal Tooth, for...

$2.95

CE Distribution F-ZGMD-S Fuse - Slow-Blow, 250V, Miniature, 5mm x 20mm

$3.36

CE Distribution P-41 Dial Lamp - #41, T-3-1/4, 2.5V, .50A, Screw Base

$3.19

CE Distribution P-42 Dial Lamp - #42, T-3-1/4, 3.2V, .35A, Screw Base

$3.19

CE Distribution P-48 Dial Lamp - #48, T-3-1/4, 2.0V, .06A, Screw Base

$3.19

Product Description

Manufacturer Part Number: S-T-SOUNDHOLE-KIT

This kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette.

Kit includes:

The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.

Excellent control
Easy installation
Accurate freehand routing

Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm). You can route an inlay cavity that's precisely compensated for the thickness of the pearl and glue, for less sanding later.

Tall twin handles give you excellent control for freehand routing, and you get a good view of your work. There's even a built-in nozzle for attaching a mini air pump to continuously blow away the dust-you'll route inlay cavities more precisely, for a better fit requiring less filler.

3/4-12 thread fits:

Dremel 4000
Dremel 400XPR
Dremel Professional
Dremel MultiPro™
most corded Dremel modules produced after 1986
Black & Decker Wizard™
Black & Decker RTX™

The soundhole and rosette routing jig is adjustable from 2" diameter to 6" diameter. It includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).

Attach the jig to the router base, then mount your Dremel or Foredom tool. Insert the registration pin through the center of the uncut soundhole, and into your work surface. Place the jig on the pin. Set the diameter of cut with the adjusting screw, and lock it down. The router base adjusts the cutting depth. Rout your rosette rings first, then cut out the soundhole.

No measurements are currently available for this product. Please if you have any questions.

Packaging Information

Packaging Dimensions

1 in. × 1 in. × 1 in.

Attention CA Residents: Prop 65 Warning

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

You may also like