skip to footer block
PEX Audtek 16 AWG OFC Speaker Wire P14739413PEX-100-016 https://cdnimages.opentip.com/full/PEX/PEX-100-016.jpg Audtek 16 AWG OFC Speaker Wire Manufacturer Part Number: SKRL-16-50Audtek Electronics\' SKRL speaker wire is designed to complement any high-end audio system. Features a clear, flexible PVC insulation and OFC configured in a rope-lay configuration to minimize skin effect. 16 AWG, 50 ft spool.Key Features: 119 x 36 AWG wire construction OFC strands guarantee maximum power transfer and high damping factor High-density, rope lay copper stranding for superior flexibility and electrical efficiency Durable, pliable clear PVC insulation withstands abuse Extremely low capacitance and inductance Red line on one conductor and ridge on the other for easy polarity identification Audtek 16 AWG OFC Speaker Wire 50 ft.Audtek Electronics\' SKRL speaker wire is designed to complement any high-end audio system. 99.99% oxygen free copper (OFC) is configured in a rope-lay configuration to minimize skin effect which causes high frequency roll-off. Clear, flexible PVC insulation withstands abuse and is rated up to 140°F (60°C). Red line on one conductor and ridge on the other for easy polarity identification even in low light. Construction: 7 x 17 strands / 36 AWG per conductor. Also available in 100 and 500 ft. rolls and 10, 12, and 14 AWG.Audtek uses pure copper strands in its OFC speaker wire. You\'ll see OFC (Oxygen Free Copper) in many places which means the copper strands go through an additional process making it more than 99% pure copper and the result reduces resistance which increases conductivity. Increasing conductivity delivers more wattage/current to speakers or other components.Available at a lower cost is CCA (Copper Clad Aluminum) speaker wire, which is aluminum strands covered by a thin layer of copper. Pure copper\'s conductivity is 35% to 40% better than CCA due to the resistance that aluminum strands add to the signal transfer. That means you would have to buy a larger gauge of CCA wire to get the same result as OFC wire. CCA wire is also very hard to get good solder results when making your own cables. Even in premade cables, the wires are more likely to separate from the connectors and cause intermittent failures. This is why we strongly recommend Audtek OFC wire and cable for all you hookup needs.Product Details BrandAudtek Electronics ModelSKRL-16-50 Part Number100-016 UPC844632055294 Unit of MeasureRolls Weight2.2 Product Specifications Conductors2 Conductor Jacket ColorClear Wire Gauge16 14739413 844632055294 2.20lbs 0.00 0.00 0.00
Audtek Electronics
18.95 2023-12-05 139 In Stock
Share to:

Audtek 16 AWG OFC Speaker Wire 50 ft.

See other products from PEX

Upc: 844632055294
SKU: PEX-100-016-P
Price:
$18.95Free shipping on orders over $129 on select PEX- items. Details
Buy in bulk & save 24% ($14.40 each)
Length:
Quantity:
139 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $18.95 ea X 1 qty = $18.95
Quantity Price Save
1+ $18.95 0%
4+ $17.12 10%
100+ $14.40 24%
This item is excluded from use of other offer, discount or coupon.

Optional related products

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products.

Product Description

Manufacturer Part Number: SKRL-16-50

Audtek Electronics' SKRL speaker wire is designed to complement any high-end audio system. Features a clear, flexible PVC insulation and OFC configured in a rope-lay configuration to minimize skin effect. 16 AWG, 50 ft spool.

Key Features:
  • 119 x 36 AWG wire construction
  • OFC strands guarantee maximum power transfer and high damping factor
  • High-density, rope lay copper stranding for superior flexibility and electrical efficiency
  • Durable, pliable clear PVC insulation withstands abuse
  • Extremely low capacitance and inductance
  • Red line on one conductor and ridge on the other for easy polarity identification


Audtek 16 AWG OFC Speaker Wire 50 ft.

Audtek Electronics' SKRL speaker wire is designed to complement any high-end audio system. 99.99% oxygen free copper (OFC) is configured in a rope-lay configuration to minimize skin effect which causes high frequency roll-off. Clear, flexible PVC insulation withstands abuse and is rated up to 140°F (60°C). Red line on one conductor and ridge on the other for easy polarity identification even in low light. Construction: 7 x 17 strands / 36 AWG per conductor. Also available in 100 and 500 ft. rolls and 10, 12, and 14 AWG.

Audtek uses pure copper strands in its OFC speaker wire. You'll see OFC (Oxygen Free Copper) in many places which means the copper strands go through an additional process making it more than 99% pure copper and the result reduces resistance which increases conductivity. Increasing conductivity delivers more wattage/current to speakers or other components.

Available at a lower cost is CCA (Copper Clad Aluminum) speaker wire, which is aluminum strands covered by a thin layer of copper. Pure copper's conductivity is 35% to 40% better than CCA due to the resistance that aluminum strands add to the signal transfer. That means you would have to buy a larger gauge of CCA wire to get the same result as OFC wire. CCA wire is also very hard to get good solder results when making your own cables. Even in premade cables, the wires are more likely to separate from the connectors and cause intermittent failures. This is why we strongly recommend Audtek OFC wire and cable for all you hookup needs.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!