5 out of 5
Product Description
Manufacturer Part Number: 05006465001
Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.
For the use in terminal blocks, control cabinets, switches, relays, sockets etc.
Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900.
The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts.
Impact strength tested at ?40°C, guaranteeing safety even under extreme conditions.
The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.
The screw symbol and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case or at the workplace.
The hexagonal non-roll feature prevents any rolling away at the workplace.
Article Description
Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Combination profile - slotted and Pozidriv* particularly for jobs on terminal blocks, fuse boxes, switches and relays. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
- Insulated VDE blades for secure work at 1,000 volts
- Smooth hard zones for high speed turning, soft grip zones for high torque transfer
- Handle markings simplify finding and sorting of tools
- Hexagonal anti-roll feature against rolling away
- Reduced shaft diameter: combination profile - Pozidriv / slotted
Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.
For the use in terminal blocks, control cabinets, switches, relays, sockets etc.
Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900.
The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts.
Impact strength tested at ?40°C, guaranteeing safety even under extreme conditions.
The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.
The screw symbol and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case or at the workplace.
The hexagonal non-roll feature prevents any rolling away at the workplace.
Article Description
Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Combination profile - slotted and Pozidriv* particularly for jobs on terminal blocks, fuse boxes, switches and relays. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
 |  |  |  | |||
|---|---|---|---|---|---|---|
| Code | mm | mm | inch | |||
| 05006465001 | # 1 | 80 | 98 | 3 1/8 | ||
| 05006466001 | # 2 | 100 | 105 | 4 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Jordan
Date: October 03, 2025
10/10 definitely recommend and will purchase again! 1000V insulated and lazer etched for a nice grip when unfastening screws or bolts.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Ro
Date: November 04, 2023
Sehr Praktischer Schraubendreher in gewohnt guter Wera Qualitt.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Steff
Date: September 15, 2023
Erster Eindruck gut
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By serge
Date: May 23, 2023
hij is handig
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Craig J.
Date: May 05, 2022
Usual good quality from wera
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By A Customer
Date: February 14, 2022
Tournevis pour vis Plusminus Pozidriv/ fente pour composants lectriques. Fonctionne parfaitement.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 6 of 6 reviews
1