4.5 out of 5
Customer Reviews
By
John
Date: January 27, 2025
The 3/4" tap and the drill bit seem to be undersized. It didnt cut enough thread for the 3/4" plug to screw in. I checked the tap and drill bit with a 3/4" pipe coupling and both were sloppy. This didnt work at all for me.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
Tim Chamberlain
Date: January 21, 2025
Good price and it worked well for my project.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Niam
Date: December 21, 2024
First time tapping, having the right size drill bit included made it easy. Cut well
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
SteveK
Date: December 20, 2024
The drill and tap set from DRILL AMERICA allowed the use of a NPT fuel tap after carefully drilling out. it looks cool... and doesn't leak!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
SpeedD408
Date: December 08, 2024
I used this to drill and tap an aluminum water pump housing. I know aluminum is not a very tough metal but never the less the drill did great and didn't get gummed up and the tap worked well too. Nice set. I just wish they made a complete set with drill and taps (they only sell a tap set).
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
ricky bell
Date: December 07, 2024
I used these items on my LS swap project and they made my tapping in the water pump very easy to preform,very glad I bought them.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: November 28, 2024
Nice
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
David Berry
Date: November 23, 2024
nice combo...sharp drill and sharp tap!! its nice to buy them together and keep them together
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Jake W
Date: November 16, 2024
Worked just fine to drill and tap a new air output on my compressor. Package well and came with oil on it to prevent rust. All in all, good price and got the job done.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: November 04, 2024
Devolv el producto pero no me rembolso el dinero!!!
Rating: 
[1 of 5 Stars!]
[1 of 5 Stars!]
By
Planner27
Date: November 02, 2024
Great product. Well packaged . Worked perfectly
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Mary Anne Soto
Date: October 28, 2024
The end of the drill flutes had a small burr, recommend dressing it with a stone (or sandpaper) before using the drill bit. The same for the tap, the cutting edges look slightly rounded. But for the price they are a reasonable quality, and Im only using this in aluminum. The tap doesn't have much lead in taper, if you are using this every day I would suggest a higher quality tool. Oct 2024
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Anonymous
Date: October 28, 2024
I kept this, but it came used, had a few slightly broken threads on the tap and the drill bit clearly had whatever material on it from the previous buyer.
Rating: [1 of 5 Stars!]
[1 of 5 Stars!]
By
Bart P.
Date: October 21, 2024
I drilled through a 1inch piece of steel and tapped it, no wear on either piece.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
BJ
Date: October 20, 2024
Excellent drill and tap set. Sharp bit and tap. Got the job done right the first time.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Steve
Date: October 16, 2024
Should do the job.....
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Dylan B.
Date: October 12, 2024
Used on cast aluminum
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
W. Emanuel
Date: October 10, 2024
I had a 4 port water manifold on my yard hydrant. The threaded plastic connector that screwed onto the garden hose connector on the hydrant broke. I was able to drill out the aluminum entrance tube on the manifold and threaded it for a 1/2 inch pipe. I bought a 1/2 inch x 1 inch long brass nipple and threaded it onto the new threads. I then added a 1/2 pipe to garden hose adapter and it screwed onto the hydrant. We are back in business with 4 hoses in our yard.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
NoneYa
Date: October 07, 2024
I am not sure how well the bit and tap would hold up for regular use, but I just needed it for a one-time application (drilled out broken brass pipe nipple and retapped). It worked well (using plenty of oil and taking my time), and it was far less expensive than buying a set of NPT taps that I will probably never have a need for going forward.
Rating: [1 of 5 Stars!]
[1 of 5 Stars!]
By
Jeff
Date: October 02, 2024
Bought the 1/8 npt kit. Very nice and very sharp drill. Super happy with my purchase.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]