skip to footer block
HFL Hafele 407.90.209 Straightening fitting for Door Straightening System Planofit P13283594HFL-407-90-209 https://cdnimages.opentip.com/full/HFL/HFL-407-90-709.jpg Hafele 407.90.209 Straightening fitting for Door Straightening System Planofit Manufacturer Part Number: 407.90.209For sliding doors, BlackItem details Planofit adds rigidity to wooden sliding and hinged doors from 16 mm thick and prevents warping in either directionIdeal for large, heavy doorsCan also be used to straight doors that have warped over a period of timeNormally two straightening fittings are recommended per door panel1. The threaded rod is inserted into the trim strip and 2 x U-washers and a hexagonal nut is attached to both sides of it2. The pre-mounted rod is then inserted into the groove3. The tensioners are inserted into the boss drilling job and fixed with screws4. Screw fix the retaining plates5. The door can now be aligned using the tensioners with an open ended SW10 wrench6. Position the cover caps on the tensioners Area of application For sliding doors For door thickness ≥16 mm Material Zinc alloyPlastic Installation Clip fixing Order reference Threaded rod and trim strip set to be ordered separately Supplied with Set consists of 2 x tensioners, 1 x hexagonal nut, 2 x securing washers, 1 x square nut, 2 x cover caps for tensioners, 4 x retaining plates 13283594 1.5800lbs 0.00 0.00 0.00
Hafele
48.12 2027-06-06
2 EA
In Stock

Hafele 407.90.209 Straightening fitting, for Door Straightening System, Planofit

Brand Hafele
Shop more from HFL

SKU: HFL-407-90-209
Unit Price: $24.06
Min.Order Price: $48.12 for 2 units
Quantity:
In Stock
* This item must be ordered in multiples of 2.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

You may also like

Product Description

Manufacturer Part Number: 407.90.209

For sliding doors, Black

Item details


Planofit adds rigidity to wooden sliding and hinged doors from 16 mm thick and prevents warping in either direction
Ideal for large, heavy doors
Can also be used to straight doors that have warped over a period of time
Normally two straightening fittings are recommended per door panel
1. The threaded rod is inserted into the trim strip and 2 x U-washers and a hexagonal nut is attached to both sides of it
2. The pre-mounted rod is then inserted into the groove
3. The tensioners are inserted into the boss drilling job and fixed with screws
4. Screw fix the retaining plates
5. The door can now be aligned using the tensioners with an open ended SW10 wrench
6. Position the cover caps on the tensioners

Area of application


For sliding doors

For door thickness


≥16 mm

Material


Zinc alloy
Plastic

Installation


Clip fixing

Order reference


Threaded rod and trim strip set to be ordered separately

Supplied with


Set consists of 2 x tensioners, 1 x hexagonal nut, 2 x securing washers, 1 x square nut, 2 x cover caps for tensioners, 4 x retaining plates

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!