Hafele 003.15.014 Titebond® II, Fluorescent Wood Glue,5 gallons

• 
  APPLICATION GUIDELINES
  Application temperature:Above 55°F
  Open assembly time: 5 minutes (70°F/50% RH)
  Total assembly time: 10-15 minutes (70°F/50% RH)
  Minimum required spread: Approximately 6 mils or 250 square feet per gallon
  Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
  Assembly time after glue application: 0-5 minutes (70°F/50% RH)
  Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
  Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
  
  BOND STRENGTH ASTM D-905 (On Hard Maple)
  TemperatureStrength psi% wood failure
  Room Temperature 3,750 72
  150° Overnight 1,750 6
  
  LIMITATIONS
  Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use.
  NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN
  

Capacity