0 reviews
Be the first to review this item!
Eminence N320T-8 2" Neo Compression Driver 8 Ohm 4-Bolt
Brand Eminence Speaker
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: N320T-8
The 2" exit N320T-8 sets a new standard in compression drivers from Eminence. Featuring D3 technology (Damped Diametric Drive) to deliver linear response while allowing a smooth crossover point.
Key Features:
Eminence N320T-8 2" Neo Compression Driver 8 Ohm 4-Bolt
Eminence has set a new standard in compression driver performance with the introduction of the N320T-8 2" exit neodymium driver. Weighing in at a mere 5 lbs, this driver boasts a broad usable frequency range of 800 Hz to 20 kHz.
The 3" titanium diaphragm features a geodesic rib pattern for increased stiffness and break-up control. Supporting the diaphragm is a polymer surround with D3™ technology (Damped Diametric Drive) to provide a smooth, clean, and extended response while still allowing a crossover point as low as 800 (at 12 dB per octave). With a power rating of 100 watts (AES) and a sensitivity of 110 dB, the N320T-8 will perform well in high output 2-way sound reinforcement systems. This driver uses a standard 4 bolt mount.
Specifications: Power handling: 100 watts with minimum crossover of 800 Hz at 12 dB per octave Fs: 521 Hz VCdia: 3" Impedance: 8 ohms Frequency response: 800-20,000 Hz SPL: 110 dB 1W/1m Dimensions: 5.72" diameter x 3.1" depth Net weight: 5 lbs.
The 2" exit N320T-8 sets a new standard in compression drivers from Eminence. Featuring D3 technology (Damped Diametric Drive) to deliver linear response while allowing a smooth crossover point.
Key Features:
- Powerful neodymium magnet keeps weight and size to a minimum
- Copper shorting ring lowers distortion and voice coil inductance
- Cooling fins and 3" voice coil ensure high power handling for extended periods
- 550 Hz resonance frequency allows crossover points as low as 800 Hz
Eminence N320T-8 2" Neo Compression Driver 8 Ohm 4-Bolt
Eminence has set a new standard in compression driver performance with the introduction of the N320T-8 2" exit neodymium driver. Weighing in at a mere 5 lbs, this driver boasts a broad usable frequency range of 800 Hz to 20 kHz.
The 3" titanium diaphragm features a geodesic rib pattern for increased stiffness and break-up control. Supporting the diaphragm is a polymer surround with D3™ technology (Damped Diametric Drive) to provide a smooth, clean, and extended response while still allowing a crossover point as low as 800 (at 12 dB per octave). With a power rating of 100 watts (AES) and a sensitivity of 110 dB, the N320T-8 will perform well in high output 2-way sound reinforcement systems. This driver uses a standard 4 bolt mount.
Specifications: Power handling: 100 watts with minimum crossover of 800 Hz at 12 dB per octave Fs: 521 Hz VCdia: 3" Impedance: 8 ohms Frequency response: 800-20,000 Hz SPL: 110 dB 1W/1m Dimensions: 5.72" diameter x 3.1" depth Net weight: 5 lbs.
Product Details | |
|---|---|
| Brand | Eminence Speaker |
| Model | N320T-8 |
| Part Number | 290-5610 |
| UPC | 876358002665 |
| Unit of Measure | Each |
| Weight | 5.85 |
Product Specifications | |
|---|---|
| Diaphragm Material | Titanium |
| Exit Diameter | 2" |
| Mounting Type | 4-Bolt |
| Power Handling (RMS) | 100 Watts |
| Impedance | 8Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category