5 out of 5
Eminence LAB 12 Professional 12" Subwoofer Speaker 6 Ohm
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: LAB 12
Eminence's LAB 12 subwoofer driver is recommended for vented, sealed, and horn-loaded professional audio enclosures. Also great as an automotive sub.
Key Features:
Overview:
Eminence LAB 12 Professional 12" Subwoofer Speaker 6 Ohm
Eminence's LAB 12 subwoofer driver is recommended for vented, sealed, and horn-loaded professional audio enclosures. The driver features long-throw construction with a heavy-duty 12-spoke die-cast aluminum frame and Kevlar® reinforced paper cone. In a horn-loaded configuration, a pair of these 12" drivers can produce low-distortion bass output comparable to 6 or 8 conventional 18" woofers. Also great as an automotive sub. For more information on the LAB 12, visit the thread at ProSoundWeb.
Specification:
Manuals & Resources:
Eminence's LAB 12 subwoofer driver is recommended for vented, sealed, and horn-loaded professional audio enclosures. Also great as an automotive sub.
Key Features:
- Double stacked 80 oz. ferrite magnets
- Copper voice coil on Polyimide former
- 12-spoke die-cast aluminum basket
- Kevlar® reinforced paper cone with foam cone edge
- Vented and extended pole piece
Overview:
Eminence LAB 12 Professional 12" Subwoofer Speaker 6 Ohm
Eminence's LAB 12 subwoofer driver is recommended for vented, sealed, and horn-loaded professional audio enclosures. The driver features long-throw construction with a heavy-duty 12-spoke die-cast aluminum frame and Kevlar® reinforced paper cone. In a horn-loaded configuration, a pair of these 12" drivers can produce low-distortion bass output comparable to 6 or 8 conventional 18" woofers. Also great as an automotive sub. For more information on the LAB 12, visit the thread at ProSoundWeb.
Specification:
Product Details | |
|---|---|
| Brand | Eminence Speaker |
| Model | LAB 12 |
| Part Number | 290-570 |
| UPC | 876358000494 |
| Unit of Measure | Each |
| Weight | 24.19 |
Product Specifications | |
|---|---|
| Nominal Diameter | 12" |
| Power Handling (RMS) | 400 Watts |
| Power Handling (MAX) | 800 Watts |
| Impedance | 6Ω |
| Frequency Response | 25 to 100Hz |
| Sensitivity | 89.2dB 2.83V/1m |
| Voice Coil Diameter | 2.5" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 22Hz |
| DC Resistance (Re) | 4.29Ω |
| Voice Coil Inductance (Le) | 1.48mH |
| Mechanical Q (Qms) | 13.32 |
| Electromagnetic Q (Qes) | 0.39 |
| Total Q (Qts) | 0.38 |
| Compliance Equivalent Volume (Vas) | 4.42ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.35mm/N |
| BL Product (BL) | 15T·m |
| Diaphragm Mass Inc. Airload (Mms) | 146g |
| Maximum Linear Excursion (Xmax) | 13mm |
| Surface Area of Cone (Sd) | 506.7cm² |
Materials of Construction | |
|---|---|
| Cone Material | Paper / Kevlar |
| Surround Material | Foam |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Kapton® / Polyimide |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 12.32" |
| Baffle Cutout Diameter | 10.98" |
| Depth | 6.44" |
| # Mounting Holes | 8 |
Parts Express Staff Recommended Enclosure Volume | |
|---|---|
| Sealed Volume | 1.25ft³ |
| Sealed F3 | 46.1Hz |
| Vented Volume | 2.75ft³ |
| Vented F3 | 22.1Hz |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By A Customer
Date: November 29, 2025
My Fender Rumble 100v3 is a great amp with only 1 limitation. The speaker that came with it can not handle my bass's 5th string (B) very well, at least to my ear. It sounded too muddy to my liking. I did some research and found this speaker that had a lower frequency range and could also handle 250 watts. It was made by the same company that made the original speaker so the fit was perfect. It took 15 minutes start to finish, and I am no electrician/speaker cabinet expert. It sounds great - much better definition on the lower end. And I have a speaker that will handle much higher wattage if needed later. Very satisfied.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 1 of 1 reviews
1