skip to footer block
EDM Uavionix UAX 90036 01 tailBeacon ADS B Out WAAS GPS Encoder Rear Position LED Nav Light P15142436EDM-UAX9003601 https://cdnimages.opentip.com/full/EDM/EDM-UAX9003601.jpg Uavionix UAX 90036 01 tailBeacon ADS B Out WAAS GPS Encoder Rear Position LED Nav Light Manufacturer Part Number: UAX-90036-01The tailBeacon from uAvionix is a TSO certified, revolutionary new way to equip ADS-B out for certified aircraft. This rear position nav light is integrated with ADS-B Out, GPS, and LED position lighting. The tailBeacon will work with any Mode C and Mode S transponder which meets the 2020 ADS-B requirements. The easy installation is as simple as replacing the aft aircraft position light. There are no airframe modifications or additional antennas required. The installation only requires 2 screws and reuses the existing power and ground to your current position light as well as the existing breaker. Due to the unique design and technology of the tailBeacon, there is no need to run any new wiring to the transponder. Light Sport aircraft are also eligible for installation but require a Letter of Authorization from the manufacturer.Goof-Proof Configuration, mechanically installing an ADS-B solution is only half the battle. The skyBeacon mobile application can also be used to configure tailBeacon. The intuitive, easy to use app guides you through setting the necessary values including the ICAO address, emitter type, aircraft length, width and GPS offsets. Since tailBeacon is self-contained there are no serial ports settings or protocols to configure.FeaturesEligible for install on any suitable experimental aircraft that routinely flies below FL180TSO certifiedEasy installationNo airframe modifications or additional antennas are requiredWorks with any Mode C or Mode S transponderTransponder data is provided via the existing aircraft wiring system using the Power TranscodertailBeacon uses the existing mounting location, breaker, and wiringInstallation is as simple as replacing the aft aircraft position lightIntegrates LED nav lightWAAS GPS2020 ADS-B complianceLowest total cost of ownership of any ADS-B Out solutionThe tailBeacon consists of the following TSOs & Regulatory Certifications:UAT Transmitter: TSO-154c (RTCA/DO-282B) Class B1SPosition Lighting: TSO-C30c Type III & SAE/AS8037WAAS GPS: TSO-C145e (RTCA/DO-229E) Class Beta 1FCC ID 2AFFTUAT016RADS-B Out: §91.225, §91.227, AC 20-165BGNSS Position: AC 20-165BSpecificationsWeight:70 gDimensions:92 x 43 x 73 mmInput Voltage:11-31 VDCOperating Power:3 WPower Transcoder:Decodes Mode A, C, and S via DC input978MHz UAT Transmitter Power Classification:DO-282B Medium PowerWAAS GPSTracking:-166 dBmReacquisition:-160 dBMCold Start:-148 dBmLED Position LightColor:Aviation WhiteIntensity:40 candelasWiFi ConfigurationPhysical:802.11 b/g/nApp Compatibility:iOS, AndroidRegulatory/TSO:FCC ID 2AFFTUAT016RADS-B Out: §91.225, §91.227, AC 20-165BGNSS Position: AC 20-165BUAT Transmitter: TSO-154c (RTCA/DO-282B) Class B1SPosition Lighting: TSO-C30c Type III & SAE/AS8037WAAS GPS: TSO-C145e (RTCA/DO-229E) Class Beta 1Product CodesMfr Part No:UAX-90036-01ECCN:7A994SCHEDULE B CODE:8803.90.9010TSO:C154c, C145e, C88b, C30c 15142436 0.4920lbs 0.00 0.00 0.00
Uavionix
2108.7600 2025-04-28 31 In Stock

Uavionix UAX-90036-01 tailBeacon, ADS-B Out, WAAS GPS, Encoder, Rear Position LED Nav Light

Brand Uavionix
Shop more from EDM

SKU: EDM-UAX9003601
Price:
$2,108.76Free shipping on orders over $519 on select EDM- items. Details
Quantity:
31 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with EDM-, and you can get free shipping for an order of over  $519.00  consisting of only EDM- series products.

Product Description

Manufacturer Part Number: UAX-90036-01

The tailBeacon from uAvionix is a TSO certified, revolutionary new way to equip ADS-B out for certified aircraft. This rear position nav light is integrated with ADS-B Out, GPS, and LED position lighting. The tailBeacon will work with any Mode C and Mode S transponder which meets the 2020 ADS-B requirements. The easy installation is as simple as replacing the aft aircraft position light. There are no airframe modifications or additional antennas required. The installation only requires 2 screws and reuses the existing power and ground to your current position light as well as the existing breaker. Due to the unique design and technology of the tailBeacon, there is no need to run any new wiring to the transponder. Light Sport aircraft are also eligible for installation but require a Letter of Authorization from the manufacturer.

Goof-Proof Configuration, mechanically installing an ADS-B solution is only half the battle. The skyBeacon mobile application can also be used to configure tailBeacon. The intuitive, easy to use app guides you through setting the necessary values including the ICAO address, emitter type, aircraft length, width and GPS offsets. Since tailBeacon is self-contained there are no serial ports settings or protocols to configure.

Features

  • Eligible for install on any suitable experimental aircraft that routinely flies below FL180
  • TSO certified
  • Easy installation
  • No airframe modifications or additional antennas are required
  • Works with any Mode C or Mode S transponder
  • Transponder data is provided via the existing aircraft wiring system using the Power Transcoder
  • tailBeacon uses the existing mounting location, breaker, and wiring
  • Installation is as simple as replacing the aft aircraft position light
  • Integrates LED nav light
  • WAAS GPS
  • 2020 ADS-B compliance
  • Lowest total cost of ownership of any ADS-B Out solution

The tailBeacon consists of the following TSOs & Regulatory Certifications:
  • UAT Transmitter: TSO-154c (RTCA/DO-282B) Class B1S
  • Position Lighting: TSO-C30c Type III & SAE/AS8037
  • WAAS GPS: TSO-C145e (RTCA/DO-229E) Class Beta 1
  • FCC ID 2AFFTUAT016R
  • ADS-B Out: §91.225, §91.227, AC 20-165B
  • GNSS Position: AC 20-165B


Specifications

Weight:
70 g

Dimensions:
92 x 43 x 73 mm

Input Voltage:
11-31 VDC

Operating Power:
3 W

Power Transcoder:
Decodes Mode A, C, and S via DC input

978MHz UAT Transmitter Power Classification:
DO-282B Medium Power

WAAS GPSTracking:
-166 dBm

Reacquisition:
-160 dBM

Cold Start:
-148 dBm

LED Position LightColor:
Aviation White

Intensity:
40 candelas

WiFi ConfigurationPhysical:
802.11 b/g/n

App Compatibility:
iOS, Android

Regulatory/TSO:
FCC ID 2AFFTUAT016R
ADS-B Out: §91.225, §91.227, AC 20-165B
GNSS Position: AC 20-165B
UAT Transmitter: TSO-154c (RTCA/DO-282B) Class B1S
Position Lighting: TSO-C30c Type III & SAE/AS8037
WAAS GPS: TSO-C145e (RTCA/DO-229E) Class Beta 1

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

Following items are non-returnable:

Restocking fee 30%
Special Order Items
Lost or "Broken" Traceability
Items Sold as Non-Returnable
Software
Computer Based Products
Programmed Items
Time Sensitive Items
Outdated Items
Used Items
Damaged Items
Opened Items
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!