5 out of 5
Customer Reviews
By
David M.
Date: November 02, 2023
I bought this for knife/multitool maintenance and for my friends 2000 Dodge ram. The climate change module thing stopped working and we didn't have any tool to get the screws out, since it's like a half inch away from the floor for the back screw. It was it to tight for pliers holding a bit, but this tool it was super easy. I bought a 2nd 1 for me and a 3rd 1 for my friend. It's really small, like the size of a finger small, but the box end can handle alot of torque and the ratchet side makes getting the screw out super fast and easy, in a tight spot. I wish the ratchet had more teeth and easier to spin, because once the screw is broke loose, the back drag is to much to operate the ratchet. In a tight spot, it could be hard to get your finger on top of the ratchet to manually spin it. That's the only thing I would change, but it's definitely a 5 star tool.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
J
Date: September 03, 2023
Arrived next day, correct items.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Mike Cooper
Date: August 21, 2023
Have had this ratchet for almost 7 years now and it has come in handy for those rare occasions you need to ratchet small fasteners. High quality
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Does as intended my only complaint is that I wish that the box e
Date: August 14, 2023
Works as intended my only complaint is that I wish that it was a 12 point on the box end
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
TR
Date: August 04, 2023
So small and light, lots of teeth in the ratchet. Excellent tool, can't say enough about the quality. I own three!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
mechanic5803
Date: June 23, 2023
I didn't expect this to be so small, but that's a good thing in this case. It will fit into very small spaces, and the mechanism seems to work very well. I might buy a couple more for various tool kits
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A-Line Powersports
Date: May 10, 2023
Chances are that if you're looking at this, you are searching for the smallest and thinnest bit driver available. I can tell you that I spent hours searching the entire internet to see what was available, and this is the one. It just so happens to be the lowest priced one as well, which is interesting.I've purchased a few and sent them back, already own the sunnex one, and this one it hands down the most compact. The BIG thing is that it has a high tooth gear. If you're in a spot that tight, you don't have a lot of space to engage the next tooth on the wheel with those other ones that only have 40 teeth.Save yourself the hassle and just get this one, I wish I had found it first and saved all of that time searching around.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Guy
Date: May 05, 2023
Fits where others don't
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Mr. Analog
Date: April 10, 2023
This is a must have tool for getting into tight or oddly shaped spaces. For example, I use it as a bit driver to get at the screws holding the door knob rosette to the door. It is also great as a bit driver for screws that require more torque than I can deliver through a straight screwdriver with my arthritis affected hands.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Alfredo Tavarez
Date: March 17, 2023
Great for small spaces
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Commando8466
Date: March 09, 2023
Good quality mini wrench
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
Kalamungai Guy
Date: February 23, 2023
I carry this everyday. I'm not a professional. With a bit extension and bit drivers it is very versatile.I think you can get more torque than a full size screw driver.With a bit extension and quality screw driver bits like Makita, you have a good chance of removing Phillips head screws without stripping it.Such an outstanding tool in such a small package.Update March 2023:I used this to loosen screws on a throttle position sensor and an old fuel clamp. These screws were hard to get to.This tool is great for hard to access areas.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Jonathan
Date: February 21, 2023
Very handy tool to have when removing certain screws with barely enough room to fit your hand. It's a game changer for aircraft mechanics
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
stephen
Date: February 06, 2023
Completely as advertised. A perfect tool !!! Just the right size. Strong. Works flawlessly. It has earned a permanent place on my tool carabiner, which I carry in my pocket every day. I use it as a screwdriver with bits AND a socket driver up to 10 mm. For any heavy torque. I use the non ratchet end. Some advice: It will hold all 1/4 inch bits, but it more strongly holds onto the bits that have a carved groove in a circle around the shaft. The wrench has a retainer that clicks into these grooves. Otherwise, it just applies pressure to the bits that have no groove. Again, this is a 100/100 grade tool.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
david
Date: January 11, 2023
I use this tool almost daily for my job servicing industrial combustion equipment. There is a particular task I often perform that requires more torque to break a fitting free. The amount of torque required has broken many quarter-drive ratchets in the past. I would have to use a standard L Allen key to break the fitting free and then switch to the ratchet.With this tool, I can use the solid end for the high torque part and then quickly switch to the ratchet side without having to bring more wrenches to the work site.This tool is invaluable to me. I am so glad I found it.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Caltrop
Date: January 09, 2023
This is a handy tool to have around for those impossibly tight spots.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Er8Top1
Date: November 17, 2022
this is SMALL so do not expect to do BIG jobs with itI have 1/4 drive adapters for the BIG jobsnice that it has retainer clips in BOTH ends instead of magnetswhich could be a negative, just magnetize your bit firstit is just what I wanted afer my old small ratchet ratcheted its last
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Caltrop
Date: November 17, 2022
this is SMALL so do not expect to do BIG jobs with itI have 1/4 drive adapters for the BIG jobsnice that it has retainer clips in BOTH ends instead of magnetswhich could be a negative, just magnetize your bit firstit is just what I wanted afer my old small ratchet ratcheted its last
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Manuk
Date: October 05, 2022
Like the value which was 10$ and dislike it that its 20$ now.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Er8Top1
Date: October 05, 2022
Like the value which was 10$ and dislike it that its 20$ now.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]