skip to footer block
REI Tuff Stuff 314 Cylinder Guard Plate Bubble Brass Plated P12381212REI-TUF314 https://cdnimages.opentip.com/full/REI/REI-TUF314.jpg Tuff Stuff 314 Cylinder Guard Plate Bubble Brass Plated Manufacturer Part Number: 314Tuff StuffCylinder Guard Plate Bubble Bp Carded 12381212 608781003144 0.8000lbs 0.00 0.00 0.00
TUFF STUFF
44.4 2026-12-24
6 EA
522 In Stock
customer review - by , December 12, 2025
4/ 5stars
This filament looks really nice. I wish they had a few more Rock colors but the white rock looks good. I am using Orca Slicer with the Elegoo Centuri Carbon and there is still no profile for this with 2.3.1 beta. Overture has several types of PLA profiles available for Orca but no PETG ones. That makes printing it a hit or miss. Unfortunately, it is more often a miss. I tried using the Elegoo PETG profiles but they almost always failed. The Generic PETG works most of the time but leaves strings on the print. It is not bad so likely just needs a little tuning to get it to work right.
customer review - by , December 12, 2025
5/ 5stars
I found that a bit too frequently the filament had trouble adhering to the plate, though no other filament had issues. This led to several prints being discarded because it had a rough start or ended up turning to spaghetti all over the printer. The color was great, the texture was not as smooth as the PLA I have. I bought this specifically because it was supposed to be stronger, but still could be too easily broken if the items were small
customer review - by , December 12, 2025
5/ 5stars
I have used Overture PETG for several years now and it works very well. I am using a modified Ender 3 Pro with a direct drive swiss hot end.
customer review - by , November 11, 2025
5/ 5stars
HORRIBLE
customer review - by , November 11, 2025
5/ 5stars
High quality filament at a fair price. I really enjoy Overture filament, it prints very well on my 3d printer. It is PETG though, so it needs to be dried (That's to be expected.) Dry it at 50c for 24 hours then store it in a dessicant dry box. The finished prints have a nice finish on them, and I don't have any issues with filament tangles. As far as consistency, I don't buy enough to comment on that, but it performs very well!
customer review - by , November 11, 2025
1/ 5stars
Love the color but adhesion is extremely poor. Wasted 90 of the filament because it would not stick to any of my 3 plates. The pla version works well but petg does not. Had to print at half the speed and 10 degrees hotter and even then it only stuck to the bed or itself 10 of the time. Sticking with bamboo and Creality for petg going forward.
customer review - by , November 11, 2025
3/ 5stars
Overture makes great filament. Costs a little more, but every spool has been flawless so far.
customer review - by , October 10, 2025
5/ 5stars
After a long time eSun user, and watching their quality just go downhill at breakneck speeds, I decided to switch over. Not sure why I waited. It's only a few dollars more expensive, but there are no quality issues at all. It's not as nice as a high end filament, but for 99 of prints, this is more than good enough.
customer review - by , September 9, 2025
5/ 5stars
Easily the worst filament I have ever had the displeasure of using. Baffling. Clogging every print. Stringing every print. Drying it to specified temperature made it worse.
customer review - by , September 9, 2025
5/ 5stars
Used this for printing lithophanes. Filament printed great out of the bag, low moisture content. Color is a bright and shiny white. Personally, I think shiny filaments aren't as good for lithophanes but my next print with this will be some planter pots, I suspect those will come.out fantastic.
  »  
  »  
  »  
  »  

Tuff Stuff 314 Cylinder Guard Plate Bubble Brass Plated

stars Rating 4.5 | 108 reviews
Brand TUFF STUFF
Shop more from REI
UPC: 608781003144
SKU: REI-TUF314
Unit Price: $7.40
Min.Order Price: $44.40 for 6 units
Quantity:
522 In Stock
* This item must be ordered in multiples of 6.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 314

Tuff Stuff
Cylinder Guard Plate Bubble Bp Carded

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

All REI- items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Look Similar Items By Category

Industrial & Scientific > Fasteners > Screws
Tools & Home Improvement > Hardware > Nails, Screws & Fasteners > Screws
Customer Reviews
4.5 out of 5
see all 108 reviews
5 stars
71
4 stars
25
3 stars
4
2 stars
0
1 stars
8
Write a Review
By Shantul Nigam
Date: December 16, 2025
This filament looks really nice. I wish they had a few more Rock colors but the white rock looks good. I am using Orca Slicer with the Elegoo Centuri Carbon and there is still no profile for this with 2.3.1 beta. Overture has several types of PLA profiles available for Orca but no PETG ones. That makes printing it a hit or miss. Unfortunately, it is more often a miss. I tried using the Elegoo PETG profiles but they almost always failed. The Generic PETG works most of the time but leaves strings on the print. It is not bad so likely just needs a little tuning to get it to work right.
Rating: 4 stars [4 of 5 Stars!]
By LeniZigg Moodie
Date: December 12, 2025
I found that a bit too frequently the filament had trouble adhering to the plate, though no other filament had issues. This led to several prints being discarded because it had a rough start or ended up turning to spaghetti all over the printer. The color was great, the texture was not as smooth as the PLA I have. I bought this specifically because it was supposed to be stronger, but still could be too easily broken if the items were small
Rating: 5 stars [5 of 5 Stars!]
By Pete
Date: December 01, 2025
I have used Overture PETG for several years now and it works very well. I am using a modified Ender 3 Pro with a direct drive swiss hot end.
Rating: 5 stars [5 of 5 Stars!]
By Katie Twyver
Date: November 28, 2025
HORRIBLE
Rating: 5 stars [5 of 5 Stars!]
By Adam
Date: November 24, 2025
High quality filament at a fair price. I really enjoy Overture filament, it prints very well on my 3d printer. It is PETG though, so it needs to be dried (That's to be expected.) Dry it at 50c for 24 hours then store it in a dessicant dry box. The finished prints have a nice finish on them, and I don't have any issues with filament tangles. As far as consistency, I don't buy enough to comment on that, but it performs very well!
Rating: 5 stars [5 of 5 Stars!]
By Chico
Date: November 21, 2025
Love the color but adhesion is extremely poor. Wasted 90 of the filament because it would not stick to any of my 3 plates. The pla version works well but petg does not. Had to print at half the speed and 10 degrees hotter and even then it only stuck to the bed or itself 10 of the time. Sticking with bamboo and Creality for petg going forward.
Rating: 1 stars [1 of 5 Stars!]
Items 1 - 6 of 95 reviews
 1  2  3  4  5 ...  [Next]