0 reviews
Be the first to review this item!
Product Description
- An environmentally friendly stripper remove sealers and coatings from concrete, Use before Silacast BES, Deco 20 Clear Finish, or TravaCast.
- Environmentally Friendly Solution: A non-hazardous liquid stripper designed to be eco-friendly while effectively removing old sealers ensuring a fresh surface for sealing
- Quick and Easy Testing: Check if sealer removal is needed by soaking the area with water. Rapid absorption by cement indicates no prior sealing, saving you time and resources.
- Ample Coverage, No Extra Tools: With coverage for approx. 1,000 square feet and no rollers or brushes required, StripaCast simplifies the removal process.
- Will remove various acrylic coatings and is non-hazardous.
Stripacast Paver Stripper
Remove / Strip
Non-Hazardous - Totally Water-Based
STRIPACAST is a non-hazardous spray applied liquid stripper designed to help remove and strip old worn out film forming sealers. Will remove various acrylic coatings
Apply STRIPACAST to concrete surfaces such as concrete pavers, tiles and cementitious surfaces prior to use of our SILACASTBES, DECO 20 CLEAR FINISH or TRAVACAST materials.
Effortless Old Sealer Removal: StripaCast Paver Stripper simplifies the process of removing old, worn-out film-forming sealers, ensuring your surfaces are prepped for fresh applications like SilaCast BES, Deco 20 Clear Finish, or TravaCast.
Quick and Easy Testing: Easily determine if sealer removal is needed with a simple water test. If water is absorbed quickly, there's likely no sealer present, saving you time and effort.
Ample Coverage: One container covers approximately 1,000 square feet, and there's no need for rollers or brushes to apply. This efficient product ensures you get the job done effectively.
Safe and Non-Hazardous: StripaCast is a non-hazardous liquid stripper designed to remove various acrylic coatings, prioritizing safety and environmental consciousness.
Why Strip Old Sealer: Removing old sealers is essential to ensure new sealers can penetrate effectively and yield the best results. Old sealers can hinder new ones and may degrade over time, affecting the final appearance.
Proper Application Guidance: StripaCast provides clear instructions for application, ensuring a hassle-free process while safeguarding your surroundings and vegetation. Proper preparation and application are emphasized for optimal results.
This product is intended to be installed by a skilled contractor. Deco Products are waterbased and non harmful to the environment but as with all sealers and chemicals proper safety and health precautions should be followed when using. Consult and understand Data, SDS and applicators guide prior to use.
Always perform a jobsite test to ensure desired results of the product.
DESCRIPTION:
Super StripaCast is a environmentally friendly stripper designed to remove old coatings from concrete paver surfaces. Super StripaCast like all other strippers will react differently to different materials and coatings. For this reason, always do a small test area to ensure desired results. A scrape test is also a good way to determine if the Super StripaCast is degrading the old product.
Most surfaces you will be able to see a failing sealer by the way it breaks down and turns white. However, if you're not sure you can do a water test. In a few di?erent locations (shaded areas, coping around pool, covered areas etc.) pour a small amount of water on the surface. If the water sits on the top of the surface there is a sealer present and stripping should be performed. If the water immediately soaks in it has not been previously sealed and stripping is not required.
WHY SHOULD I STRIP AN OLD JOB
When applying a new sealer to any surfaces it is always recommended to remove the old sealer to ensure the best possible results. Old sealers can prevent the new sealer from penetrating which will restrict their effectiveness on the job.
Old sealers can also continue to deteriorate underneath the new sealer making the job look not as good as it should.
Stripacast is a non-hazardous liquid stripper used to remove old sealers from concrete surfaces.
Use this product prior to using Silacast BES, DECO 20 CLEAR FINISH, or TravaCast.
COVER AND TAPE OFF ALL AREAS NOT TO BE STRIPPED.
Cover and tape o? all areas not to be sprayed. The use of a paint shield is also a great tool for protecting areas not being stripped. Pre wet all surfaces such as grass, screens, pool cages and other areas within a 10' area being treated. This will help deactivate the StripaCast if over spray during application occurs. Do not get full strength StripaCast on grass or other vegetation. This can cause stress and shock on the vegetation. Keep pets and other animals away during application.
Appliication
Start at the lowest point and apply in workable sections. With desired sprayer apply a generous amount of StripaCast to surface. After 10 minutes re apply to areas that have dried out or appear to need more help. Dwell time will vary between 20- 40 minutes. Surface will turn milky white when ready to strip. You can aslo do a scrape test to ensure surface is ready. Take your ?nger nail or a sti? credit card like object and scrape along the surface. You should see the old sealer scrape away. Apply more StripaCast if this does not happen. Once current section is ready to be stripped apply stripper to the next section to continue at a reasonable pace.
With a turbo tip begin stripping at the lowest point with the water overspry directed away from the rest of the area being stripped. Do this in a slow, small circular motion over the entire job.
Keep out of reach from children.
Open the bucket of StripaCast and mix with a drill and paddle mixer. Move mixer from side to side and up and down for at least one minute mixing completely. Because StripaCast contains a high amount of solids this is a very important step to ensure there is no separation with the material. Pour StripaCast without dilution in to desired sprayer using a strainer or cloth ?lter. This will help prevent the sprayer tip from clogging during application. Tape and cover all areas not to be sealed. A metal paint guard is also a great alternative for this step. Do not apply in temperatures below 50 degrees or above 95 degrees Fahrenheit. Second coat may be necessaryin hotter temperatures. Use caution on windy days. Do not apply to wet surfaces. Best time of day to apply StripaCast is in the morning before the surface can absorb heat from the sun.
Do not use when rain is expected
| StripaCast-Techsheet.pdf | ||
| StripaCast-installation-guide.pdf |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Note
This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item