skip to footer block
PEX Parts Express Bluetooth 5.0/FM/Media Player 2 x 25W Max Amplifier Board P13624412PEX-320-642 https://cdnimages.opentip.com/full/PEX/PEX-320-642.jpg Parts Express Bluetooth 5.0/FM/Media Player 2 x 25W Max Amplifier Board Bluetooth, FM radio, media player and 2 x 25W amplifier all in one board. Adjust your audio project to the perfect sound reproduction with 6 IR wireless remotely controlled EQ options.Key Features: Bluetooth, FM radio, media player and 2 x 25W Max amplifier all built into one space saving boardIncludes six equalization settings using the included IR wireless remote for sound customizationPre-assembled and pre-tested for easy project integrationPower with standard switching/regulated 5 to 18 VDC 3A AC adapterPerfect portable audio project using 3-cell lithium battery holderSupport music in MP3 / WMA / WAV format; MP3 songs 32-320kbps, WAV / WMA is 1411kbps or belowIncludes speaker and power wiring harnesses 5\" long for quick installationOverview: Bluetooth 5.0/FM/Media Player 2 x 25W Max Amplifier BoardMake your own multimedia wireless Bluetooth amplifier or portable speaker with this pre-tested and pre-assembled 2 x 25W amplifier board. The all-in-one design enables you to make smaller projects if space is an issue. FM radio and multimedia player makes this the perfect amp board to make a complete portable DIY boom box when you add a Dayton Audio LBB-3v2 battery board. Just add a power supply to charge the 3-cell battery board, batteries, speakers, and the proper enclosure to finish the project. The included IR remote makes it easy to adjust the volume and EQ settings from a distance. The built-in microphone enables you to take phone calls through the amplifier, plus it enables you to record your voice as long as a flash drive is installed. Play prerecorded music through the built-in flash drive ports or playback your voice recordings.Note: FM reception requires a short piece of antenna/hook up wire (sold separately) soldered to the board. Use CR2025 battery for the remote (sold separately). Misprint on the back of some remotes state CR1220.Specifications: Max power output: 2 x 25W @ 4 ohms with 18 VDC 3A Impedance: 4 ohm Amplifier chip: CS8676E SNR: 125 dB Frequency response: 130-18,000 Hz RMS output: 2 x 15W @ 1% THD Channel crosstalk: -65 dB Signal input: 3-conductor 3.5 mm jack or board solder holes Speaker output sockets: 2 x JST PH 2.0 Power input socket: JST PH 2.0 Power requirements: 5-18 VDC Maximum current draw 3A Standby current draw: 17mA Line output and FM antenna options: On board solder holes Board dimensions without face plate: 2.95\" W x 0.5\" H x 1.3\" D Face plate dimensions: 4.2\" W x 1.\" H x 1.42\" D with board Cutout required for faceplate: 0.79\" H x 3.29\" W Bluetooth: V5.0 Bluetooth name: FX-BT Remote battery: CR2025 (sold separately).Specification: Product DetailsBrandParts ExpressPart Number320-642UPC848864068404Unit of MeasureEachWeight0.1Product SpecificationsAudio Input/OutputHDMIBoard Type2 Channel Stereo AmpPower (RMS/Channel 8 ohms)0 - 25 WattsVideo Input/OutputHDMISpecial FeaturesBluetoothManuals & Resources: Bluetooth 5.0/FM/Media Player 2 x 25W Max Amplifier BoardParts Express Standard Warranty 13624412 848864068404 0.1200lbs 0.00 0.00 0.00
Parts Express
14.3800 2027-07-22 94 In Stock

Parts Express Bluetooth 5.0/FM/Media Player 2 x 25W Max Amplifier Board

Shop more from PEX

UPC: 848864068404
SKU: PEX-320-642
Price:
$14.38Free shipping on orders over $129.00 on select PEX- items. Details
Quantity:
94 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

You may also like

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products.

Product Description

Bluetooth, FM radio, media player and 2 x 25W amplifier all in one board. Adjust your audio project to the perfect sound reproduction with 6 IR wireless remotely controlled EQ options.

Key Features:
  • Bluetooth, FM radio, media player and 2 x 25W Max amplifier all built into one space saving board
  • Includes six equalization settings using the included IR wireless remote for sound customization
  • Pre-assembled and pre-tested for easy project integration
  • Power with standard switching/regulated 5 to 18 VDC 3A AC adapter
  • Perfect portable audio project using 3-cell lithium battery holder
  • Support music in MP3 / WMA / WAV format; MP3 songs 32-320kbps, WAV / WMA is 1411kbps or below
  • Includes speaker and power wiring harnesses 5" long for quick installation


Overview:
Bluetooth 5.0/FM/Media Player 2 x 25W Max Amplifier Board

Make your own multimedia wireless Bluetooth amplifier or portable speaker with this pre-tested and pre-assembled 2 x 25W amplifier board. The all-in-one design enables you to make smaller projects if space is an issue. FM radio and multimedia player makes this the perfect amp board to make a complete portable DIY boom box when you add a Dayton Audio LBB-3v2 battery board. Just add a power supply to charge the 3-cell battery board, batteries, speakers, and the proper enclosure to finish the project. The included IR remote makes it easy to adjust the volume and EQ settings from a distance. The built-in microphone enables you to take phone calls through the amplifier, plus it enables you to record your voice as long as a flash drive is installed. Play prerecorded music through the built-in flash drive ports or playback your voice recordings.

Note: FM reception requires a short piece of antenna/hook up wire (sold separately) soldered to the board. Use CR2025 battery for the remote (sold separately). Misprint on the back of some remotes state CR1220.

Specifications: Max power output: 2 x 25W @ 4 ohms with 18 VDC 3A Impedance: 4 ohm Amplifier chip: CS8676E SNR: 125 dB Frequency response: 130-18,000 Hz RMS output: 2 x 15W @ 1% THD Channel crosstalk: -65 dB Signal input: 3-conductor 3.5 mm jack or board solder holes Speaker output sockets: 2 x JST PH 2.0 Power input socket: JST PH 2.0 Power requirements: 5-18 VDC Maximum current draw 3A Standby current draw: 17mA Line output and FM antenna options: On board solder holes Board dimensions without face plate: 2.95" W x 0.5" H x 1.3" D Face plate dimensions: 4.2" W x 1." H x 1.42" D with board Cutout required for faceplate: 0.79" H x 3.29" W Bluetooth: V5.0 Bluetooth name: FX-BT Remote battery: CR2025 (sold separately).

Specification:




Manuals & Resources:

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!