Norton CLP7500M 626 Grade 1 Closer Plus Parallel Arm Door Closer,Push Side,Parallel Arm Heavy Duty,Metal Cover,Satin Chrome Finish,Non-Handed

Product Specs

Vendor : ASSA Abloy

Manufacturer : Norton

SKU : CLP7500M 626

UID : NOR300CLP7500M626E

Grade : Grade 1

UL Listing : UL 10C

Unit of Measure : Each

Origin : USA

BAA Qualified : Yes

Installation : Commercial

Fire Rating : 3 Hours {A}

ANSI : ANSI A156.4

Limited Warranty : 25 Years

ADA Compliance : Yes

Finish

Finish
626/US26D

Finish Description : Satin Chrome

Finish Family : Matte Silver

Technical Specs

Handing : Non-Handed

Type : Surface

Mounting Group : Hydraulic

Hold Open : No

Back Check : Adjustable

Cover : Metal

Closer Size : 1 to 6

Cold Weather Fluid : Yes

Mounting Location : Push Side

Mounting Style : Parallel Arm

Degree Swing : 85-110 Deg.

Stop : Positive Stop

Arm Type : Parallel Arm, Heavy Duty

Dimensions

Pack Qty : 1

Ship Weight : 14 lbs.

Pack Length : 15.25"

Pack Width : 6.25"

Pack Height : 3.5"

Unit of Measure 2 Qty : 4

Pack Volume : 333.59 in³

Pack Length 2 : 15.75"

Pack Width 2 : 12.75"

Pack Height 2 : 7.75"

Pack Volume 2 : 1556.3 in³

7500 Series Closers

• Closers for interior and exterior doors shall be full rack-and-pinion type with cast aluminum alloy body.
• Closers shall be surface mounted and shall project no more that 2-3/16" (55mm) from the surface of the door.
• Closers shall be non-handed to permit installation on doors of either hand.
• Closer fluid shall contain lubricity and anti-oxidation agents.
• Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F.
• Closers shall have multi-size spring power adjustment to permit setting of spring from size 1 through size 6.
• Closers shall have two non-critical valves, hex key adjusted, to independently regulate sweep speed and latch speed.
• Closers shall have backcheck cushioning controlled by a hex key adjusted valve.
• Closers shall have backcheck position controlled by a hex key adjusted valve.
• [Closers shall have adjustable delayed-action closing controlled by a hex key adjustable valve.]
• [Closers shall be highly corrosion resistant and shall have all external body components of aluminum, brass or stainless steel material and all fasteners of stainless steel.]
• Regular arm and top jamb closers shall have a non-hold open shoe permitting 15% ( +/-7-1/2% ) power adjustment.
• Environmental Product Declaration (EPD) certified