0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: 5833XSQPB 693T
ADAEZ PRO PLUS Door Operator Kit, Push Side, (Parallel Arm Operator, ADA1015P Hardwire Kit and 2 Square Style Push Buttons), Black Textured Powder Coat Finish
The 5800 Series ADAEZ PRO is a compact electromechanical door operator that is simple to install and use.
This heavy-duty, low energy operator is intended for high traffic manual opening applications that occasionally require automatic operation like retail outlets, banks, schools or universities. A Regenerative Power System charges an onboard battery pack that eliminates the need to run electrical wire to the unit. When used in automatic mode 25% of the time or less, the 5800 Series ADAEZ PRO will self-generate enough power to charge the battery pack for up to 12 years.
ADAEZ PRO PLUS Door Operator Kit, Push Side, (Parallel Arm Operator, ADA1015P Hardwire Kit and 2 Square Style Push Buttons), Black Textured Powder Coat Finish
Product Specs
Vendor
ASSA Abloy
Manufacturer
Norton
SKU
5833XSQPB 693T
UID
NOR3005833XSQPB693T
Grade
Grade 1
Unit of Measure
Each
Installation
Commercial
ADA Compliance
Yes
Limited Warranty
2 Years
ANSI
A156.19
UL Listing
UL10c
Fire Rating
90 Min
Finish
Finish
693T
Finish Description
Black Textured Powder Coat
Finish Family
Black
Technical Specs
Type
Surface
Hold Open
Yes
Mounting Location
Push Side
Mounting Style
Parallel Arm
Door Weight
250 lbs.
Delay
Yes
Cover
Less Cover
Arm Type
Parallel Arm
Degree Swing
95 Deg.
Voltage
24V
Hold Open Type
Electric
Physically Handicapp
Yes
Degree Hold Open
95 Deg.
Mounting Group
Reduced Power
Back Check
None
Door Size
Up to 48"
Dimensions
Pack Qty
1
Ship Weight
20 lbs.
Pack Height
10"
Pack Length
12"
Pack Width
12"
Pack Volume
1440 in³
5800 ADAEZ Pro
The 5800 Series ADAEZ PRO is a compact electromechanical door operator that is simple to install and use.
This heavy-duty, low energy operator is intended for high traffic manual opening applications that occasionally require automatic operation like retail outlets, banks, schools or universities. A Regenerative Power System charges an onboard battery pack that eliminates the need to run electrical wire to the unit. When used in automatic mode 25% of the time or less, the 5800 Series ADAEZ PRO will self-generate enough power to charge the battery pack for up to 12 years.
- Complies with requirements of ANSI A156.19.
- Adjustable opening and closing forces that meet the provisions of ANSI 117.1 and the Americans with Disabilities Act.
- Regenerative drive system which charges the on-board battery pack when operator is opened manually and which requires no external electrical power.
- Determines door size and weight and automatically tune controller to operate within ANSI 156.19 and 117.1 standards. Also has the following adjustable functions:
- Opening/Closing Speed.
- Hold-open Time.
- Close Check.
- Opening/Closing Force.
- On-board diagnostics which continually maintain control of door speed in wind or abusive environment condition.
- When operated manually, utilizes a clutch mechanism that disengages the motor gearbox assembly upon opening, then re-engages during the closing cycle to control spring force for even and smooth operation throughout the entire opening and closing cycle.
- Continues closing door within ANSI A156.19 and 117.1 requirements without any external power supplied. Upon meeting an obstruction during the opening cycle the door shall remain under power for two seconds and then close under spring force; if the door meets and obstruction will closing, the door will maintain a closing force of 8 lbs or less.
- Capable of operating doors up to 48" wide, weighing up to 250 lbs, and successfully tested for 1,000,000, automatic cycles.
- Operates in climates with temperatures above -40° F and has a two year warranty.
- Two stainless steel, 1-3/4" x 4-3/4" wireless, jamb mounted, push button transmitters with required signage. Locate push buttons as directed by architect and within ANSI A156.19 and 117.1 guidelines.
- Utilizes a triangular hardened steel output shaft to connect door arm with a two piece tapered coupling for superior slip resistance.
- Push button transmitter with circuit boards that have been specially coated to resist moisture and humidity making the electronics weather resistant.
- Integral heavy duty cast aluminum shock absorbing arm, which when fully extended is in full tension eliminating the need for an auxiliary door stop.
- Three architecturally finished dress covers and black powder coated frame, arms and mounting brackets.
- Environmental Product Declaration (EPD) certified
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
Return could only be applied within 10 days after delivery.
Note
This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item