Worked great on 2016 Dodge Caravan

I used it to fill my 2010 Subaru coolant and it fit perfect, worked great. I used the stopper after all bubbles had stopped coming back up thru the funnel. Was able to save and not spill and coolant. No bubbles told me I had a healthy head gasket and this tool makes topping and burping the coolant a breeze.

Great product!

I've never replaced my coolant myself before. This funnel makes filling and burping the system a breeze. The attachment caps feel solid and it doesn't leak at all. The plug for the funnel makes transferring the excess coolant to the overflow tank so easy. The funnel is well worth the money. I can't imagine changing coolant without it.

yet another tool i wish I'd gotten much earlier in life as a DIY mechanic on my own stuff. This would have made life easier for burping systems, etc. w/ much less hassle. I also got the vacuum refiller and will likely use that for full refills/flushes, but this will be great if I'm just maintaining level or maybe portable or otherwise don't have a compressor with me.

Easy fitment and seal for 2006 Accord and 2012 CRV. Easy to attach. No leaks. Handle plug seals as expected to move fluid around to overflow container or back to coolant jug. Worth the cost.

This funnel works great for my toyota highlander 2017 and 2020 tundra.

If you're doing work on your coolant system, then you'll need one of these to bleed the air out of your system. I used it on my boat and it worked perfectly. Nice selection of fittings, so you should be able to find what you need. Big money saving over taking this to a boat mechanic, believe me.

Connect it to the radiator filler, fill it half way with coolant and it is a coolant reservoir. Run the motor and as the coolant circulates and air bubbles up, it automatically adds coolant. Has stopper to hold remaining coolant when the process is complete.

very handy tool for coolant service,especially for Japanese vehicles with tiny radiator cap openings. I serviced the cooling system on my wifes Toyota Highlander and hardly spilled a drop.Well made quality tool.The "green" adaptor fit the Toyota radiator perfectly. I worked in garages for 35 years and Lisle tools are always good.

It really helped make getting air pockets out of cooling system easy. You do have to run engine for about 20-30 minutes to be sure all burps and bubbles are out. Run engine with heater on maximum temperature and blower on low to get coolant to flow through heater core. Also, revving up engine occasionally helps bleed out bubbles too. When no more bubbles then you're done!

The funnel kit worked perfect for a drain and fill on a 2016 toyota camry. The lisle brand is reccomended by Toyota, so I purchased this ensuring a tight seal. I had zero leaks. Make sure you use the right cap, as two of them are very close in size.

I have used it once and it really works as I expected, if I recommend this article and it also has very good quality

My 2015 Honda Civic just passed 110K. decided to change the coolant and thermostat. This product work flawlessly with less mess than traditional "burping". Very convenient that all the pieces fit inside the funnel torage as well.

Virtually useable in any car. Nice adapters and definitely prevents messy spills

Purchased to facilitate radiator burping on two vehicles after a flush and refill. I was concerned after reading several posts claiming that there were problems with fitment. Product arrives exactly as expected and was true to description. I have a Jeep with an aftermarket radiator. The product description is vague regarding fitment, but Lisle is a robust brand so I ordered the standard package and hoped for the best. Upon arrival I familiarized myself with the components and selected the red nozzle and large cap as the closest, best radiator neck fit. Due to a small amount of wiggle, I adjusted the tension of the tabs on the cap and placed an additional o-ring around the top of the red nozzle to secure the device firmly with the cap in position (might not have been necessary after hammer-tapping the tabs tighter, but I like redundancy). The extension tube and bucket perched solidly above the radiator and performed the job easily. Occasional squeezing of the upper hose while running completed the extraction of air bubbles. You don't need a Godzilla connection for a non-pressurized burping session, so don't over think it. Got the whole thing done and put up before I even though about a picture!

Really did the trick to remove air from the cooling system!

Was able to completely change the radiator fluid in a Honda Accord without spilling one single drop. Great!

Worth every penny! Easy to set up on my 2000 4Runner with no leaks. It made the whole process very manageable.

I bought this to service the radiator in my 1997 BMW 3 series, but it did not fit. The cap will not seal, it cannot be burped correctly.