skip to footer block
IEC IEC L7214 06 3 Pin XLR Male to 1/4in Phono Male Balanced 3 pole on Phone Plug 6 feet P6113651IEC-L7214-06 https://cdnimages.opentip.com/full/IEC/IEC-L7214-06.jpg IEC L7214 06 3 Pin XLR Male to 1/4in Phono Male Balanced 3 pole on Phone Plug 6 feet Manufacturer part number: L7214-06Full description: WeightN/ALengthSingle Hood Adapter, 3 Foot, 6 Foot, 10 Foot, 15 Foot, 25 Foot, 50 Foot 6113651 787714104735 0.4000lbs 0.00 0.00 0.00
IEC
14.9800 2027-06-13 10 In Stock
customer review - by , December 12, 2025
5/ 5stars
These are nice cables. Only use with unbalanced devices though. the shielding is good, I don't notice any added noise. I usually use a DI box to run unbalanced to balanced, but for short runs this will usually do the trick to not need a DI box.
customer review - by , November 11, 2025
5/ 5stars
I just needed a XLR jack to 1/4" adapter for a mixer. It's a mono cable and unbalanced (i.e. meant for consumers instead of heavy stage performance). Mono is just fine since I'm pulling in all the audio for post-production mixing in some software. It's just long enough to stretch across my table for the guest and doesn't need to be fancy. It just fits the bill. Sound quality? I'm not too concerned. It's short enough that it shouldn't matter unless I have something nearby with heavy electro-magnetic interference (which I don't). I cannot vouch for any shielding the cable has because of that. For simple (e.g. homely podcast or book reading) jobs, this is fine.
customer review - by , November 11, 2025
5/ 5stars
Not too much to be said here. I got these cables to use at my desk with a recording microphone. The cords I had were really long and these swapped in perfectly as a replacement. I haven't experience any issues with them and they are the right fit for my needs since I am operating on a relatively small desk.
customer review - by , November 11, 2025
5/ 5stars
I needed a reliable XLR to 1/4" TS cable for my dynamic microphone, and this Pegcabac cable works perfectly. The build quality is solid, with a durable outer jacket that feels like it will hold up over time. The connectors fit snugly without any looseness, and the sound transfer is clean with no noticeable interference or hum. At 15 feet, it gives me plenty of length for flexible setup options. Works great for live sound, recording, or even connecting to an amp or mixer. Overall, a great value for the pricedefinitely recommend!
customer review - by , October 10, 2025
5/ 5stars
I'm using these to connect a mixer to an audio interface and they're working great so far. I've had no issues
customer review - by , August 8, 2025
5/ 5stars
Calidad garantizada
customer review - by , November 11, 2024
5/ 5stars
Exactly what I expect, good quality cable, delivery clear sound
customer review - by , April 4, 2024
5/ 5stars
I always need TRS-to-XLR adapters to send my guitar pedal unit to FOH or to my DAW. The first thing I noticed is this cable is very flexible. I don't hear any noise, so insulation doesn't seem to be a problem. The sleeves have plastic ends that screw onto the metal plugs. Inside the sleeves is like a plastic 3-prong clamp that grabs onto the wire sheath. The cable is just long enough to connect directly from my floor to my desktop audio interface, but it's still short enough to use as an unobtrusive patch cable to connect with a FOH XLR cable. Most importantly, I've learned that male XLR ends of cheap patch cables like these can be VERY hard to attach and remove from the female ends of other XLR cables. This one snaps on to other XLR cables securely and easily, and comes off just as easily when wanted. I tried it with several other brand cables to make sure. So far so good. I'll update this review if I run into any problems with it. I will be using this as the main "out" line from my Headrush, so if it's going to fail, I'll know about it soon. Lots of gigs coming up.
customer review - by , April 4, 2024
4/ 5stars
This cable solved a problem I had trying to output a drum sampler on stage. Instead of using a direct box, I could just use this cable to go directly to the XLR input hub. No latency, attenuation, or white noise. Works exactly as expected.
customer review - by , April 4, 2024
4/ 5stars
Good quality cable - fairly priced, connectors are secure, easy to coil. I ordered the 6' length and it's indeed 6' long.

IEC L7214-06 3 Pin XLR Male to 1/4in Phono Male Balanced (3 pole on Phone Plug) 6 feet, Price/each

stars Rating 5 | 17 reviews
Brand IEC
Shop more from IEC

UPC: 787714104735
SKU: IEC-L7214-06
Price: $14.98
Length:
Quantity:
10 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

You may also like

Product Description

Price is for each.

Manufacturer part number: L7214-06

Full description:

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 stars
13
4 stars
4
3 stars
0
2 stars
0
1 stars
0
By Tim
Date: December 06, 2025
These are nice cables. Only use with unbalanced devices though. the shielding is good, I don't notice any added noise. I usually use a DI box to run unbalanced to balanced, but for short runs this will usually do the trick to not need a DI box.
Rating: 5 stars [5 of 5 Stars!]
By Bri
Date: November 29, 2025
I just needed a XLR jack to 1/4" adapter for a mixer. It's a mono cable and unbalanced (i.e. meant for consumers instead of heavy stage performance). Mono is just fine since I'm pulling in all the audio for post-production mixing in some software. It's just long enough to stretch across my table for the guest and doesn't need to be fancy. It just fits the bill. Sound quality? I'm not too concerned. It's short enough that it shouldn't matter unless I have something nearby with heavy electro-magnetic interference (which I don't). I cannot vouch for any shielding the cable has because of that. For simple (e.g. homely podcast or book reading) jobs, this is fine.
Rating: 5 stars [5 of 5 Stars!]
By Matt
Date: November 19, 2025
Not too much to be said here. I got these cables to use at my desk with a recording microphone. The cords I had were really long and these swapped in perfectly as a replacement. I haven't experience any issues with them and they are the right fit for my needs since I am operating on a relatively small desk.
Rating: 5 stars [5 of 5 Stars!]
By Sean Patrick Shetler
Date: November 03, 2025
I needed a reliable XLR to 1/4" TS cable for my dynamic microphone, and this Pegcabac cable works perfectly. The build quality is solid, with a durable outer jacket that feels like it will hold up over time. The connectors fit snugly without any looseness, and the sound transfer is clean with no noticeable interference or hum. At 15 feet, it gives me plenty of length for flexible setup options. Works great for live sound, recording, or even connecting to an amp or mixer. Overall, a great value for the pricedefinitely recommend!
Rating: 5 stars [5 of 5 Stars!]
By Phillip Laclede
Date: October 31, 2025
I'm using these to connect a mixer to an audio interface and they're working great so far. I've had no issues
Rating: 5 stars [5 of 5 Stars!]
By Edgar Fernando Len Gaitn
Date: August 02, 2025
Calidad garantizada
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 17 reviews
 1  2  3  [Next]