Hafele 917.64.840 Door terminal set, DT 750, for interior/guest room doors, with thumbturn, with Bluetooth interface, Price/Piece

Material

Finish/color

Supplied with

Application

• Red/white LEDs/Piezo sound generator for indication of locking and unlocking
• Door backplate internal module with thumbturn with which "Do not disturb" can be indicated on the exterior module by a flashing signal (thumbturn = DND = "Do not disturb" function). Mechanical locking takes place by turning the thumbturn, pushing forward the deadbolt of the mortice lock.
• The door can be opened without a key at any time from the inside by operating the lever handle.
• Several keys per room and up to 20 keys per door terminal possible
• Mechanical emergency opening possible
• With real-time clock for audit trail of all locking processes, openings of the housing, emergency openings and battery removals (memory for up to 1,000 audit trail entries, for up to 1,000 user keys)
• Tamper protection on internal module blocks the door terminal in case of removal of the internal backplate. Access from the outside is blocked for user keys with activated tamper protection. The tamper protection can be activated (optional).
• For service personnel: Indication when battery change is required

• Easy mounting
• Easy battery change
• Drilling dimensions in accordance with DIN 18251 + additional drill hole for DND; no cut-outs required in the door leaf
• Installation with standard rose fixing points

Technical data

Technical data

Note

Notes for operation and installation
	Planning by Dialock specialist is required. DT 710 door terminal modules on fire resistant and smoke control doors must be installed by Dialock specialists after approval by the door manufacturer. If the terminal is installed without this permission, the Fire and Smoke Control Certificate for the door will be invalidated.
Can only be used in combination with the DIN mortice lock for DT 710. The comfort function is determined with the mortise lock.
Mechanical emergency opening The DT 710 door terminal set must always be equipped with a single profile cylinder or short profile cylinder for mechanical emergency opening. When using the mechanical emergency opening, please note the information sheet for determining the single profile cylinder length or short profile cylinder length.
	The batteries in the door backplate internal module are secured with a special screw in the cover. This is meant to avoid unauthorised removal of the batteries. To insert the batteries into the internal module, a special bit is required. Please order separately.

Note

Notes for operation and installation
	Planning by Dialock specialist is required. DT 710 door terminal modules on fire resistant and smoke control doors must be installed by Dialock specialists after approval by the door manufacturer. If the terminal is installed without this permission, the Fire and Smoke Control Certificate for the door will be invalidated.
Can only be used in combination with the DIN mortice lock for DT 710. The comfort function is determined with the mortise lock.
Mechanical emergency opening The DT 710 door terminal set must always be equipped with a single profile cylinder or short profile cylinder for mechanical emergency opening. When using the mechanical emergency opening, please note the information sheet for determining the single profile cylinder length or short profile cylinder length.
	The batteries in the door backplate internal module are secured with a special screw in the cover. This is meant to avoid unauthorised removal of the batteries. To insert the batteries into the internal module, a special bit is required. Please order separately.