5 out of 5
Dayton Audio RS270-8 10" Reference Woofer
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: RS270-8
Dayton Audio Reference Series RS270-8 10" woofers deliver exceptional clarity, detail, and dynamics-and of course, incredibly low distortion.
Key Features:
Overview:
Dayton Audio RS270-8 10" Reference Woofer
The Dayton Audio Reference Series was conceived with one goal in mind-low distortion. Each speaker was carefully designed and optimized to offer the highest performance with the lowest distortion levels. At the same time, by focusing on features that contribute to sound quality and eliminating unnecessary frills, the drivers offer value unparalleled in the industry. Dayton Audio Reference Series RS270-8 10" woofers deliver exceptional clarity, detail, and dynamics-and of course, incredibly low distortion.
Specification:
Manuals & Resources:
Dayton Audio Reference Series RS270-8 10" woofers deliver exceptional clarity, detail, and dynamics-and of course, incredibly low distortion.
Key Features:
- One of the lowest distortion, highest resolution driver series available
- Low-distortion high-excursion motor system with two short-circuit paths
- Compliant suspension and rigid black anodized aluminum cone for strong bass performance
- Heavy-duty 6-hole cast frame, low-loss rubber surround, and solid aluminum phase plug
- Designed and engineered in the USA
Overview:
Dayton Audio RS270-8 10" Reference Woofer
The Dayton Audio Reference Series was conceived with one goal in mind-low distortion. Each speaker was carefully designed and optimized to offer the highest performance with the lowest distortion levels. At the same time, by focusing on features that contribute to sound quality and eliminating unnecessary frills, the drivers offer value unparalleled in the industry. Dayton Audio Reference Series RS270-8 10" woofers deliver exceptional clarity, detail, and dynamics-and of course, incredibly low distortion.
Specification:
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | RS270-8 |
| Part Number | 295-357 |
| UPC | 844632088773 |
| Unit of Measure | Each |
| Weight | 10.0008 |
Product Specifications | |
|---|---|
| Nominal Diameter | 10" |
| Bolt Circle Diameter | 10.16 |
| Power Handling (RMS) | 100 Watts |
| Power Handling (MAX) | 200 Watts |
| Impedance | 8Ω |
| Frequency Response | 27 to 2,040Hz |
| Sensitivity | 88.7dB 2.83V/1m |
| Voice Coil Diameter | 2" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 29.6Hz |
| DC Resistance (Re) | 6.8Ω |
| Voice Coil Inductance (Le) | 0.93mH |
| Mechanical Q (Qms) | 2.08 |
| Electromagnetic Q (Qes) | 0.61 |
| Total Q (Qts) | 0.47 |
| Compliance Equivalent Volume (Vas) | 3.4ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.57mm/N |
| BL Product (BL) | 10.3T·m |
| Diaphragm Mass Inc. Airload (Mms) | 50.5g |
| Maximum Linear Excursion (Xmax) | 6.6mm |
| Surface Area of Cone (Sd) | 346.4cm² |
Materials of Construction | |
|---|---|
| Cone Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 10.71" |
| Baffle Cutout Diameter | 9.29" |
| Depth | 4.45" |
| # Mounting Holes | 6 |
Parts Express Staff Recommended Enclosure Volume | |
|---|---|
| Sealed Volume | 1ft³ |
| Sealed F3 | 58Hz |
| Vented Volume | 2.3ft³ |
| Vented F3 | 34Hz |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Sean Oconnell
Date: April 08, 2017
This is an excellent woofer. Rich Punchy sound without any distortion. I have this paired with a PT2C-8 ribbon tweeter crossed over at 2000hz and with a L-pad on the tweeter. I used a ta2022/ne5532 diy amp and focusrite 6i6 to power them. I showed this setup to my audio engineering club and they said it is easily the equivalent of an 1200$ or more monitor setup. Highly recommended.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 1 of 1 reviews
1