skip to footer block
PEX Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System P11350454PEX-390-807 https://cdnimages.opentip.com/full/PEX/PEX-390-807.jpg Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System Manufacturer Part Number: DATS V3Dayton Audio has taken the most complete and easy-to-use audio test system and improved it in almost every way when creating the DATS V3 Computer Based Audio Component Test System. With improvements to the accuracy, capability, and reliability of the DATS V2, the DATS V3 sets a new standard for quick and accurate audio component measurements.Key Features: Rugged aluminum housing with detachable test leads and built-in precision calibration resistorTighter tolerances on internal components for more precise measurementsIncreased output capability means greater separation from the noise floor, resulting in more accurate measurementsDATS Linearity Test for comparing parameters and impedance plots at multiple drive levelsOptional under desk mounting brackets included to save desk spaceOnly 1\" H x 2-1/2\" W x 4-1/8\" D for easy portabilityOverview: Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test SystemDayton Audio DATS V3 Computer Based Speaker & Audio Component Test SystemThe Perfect Companion for Audio ProfessionalsWhen designing the DATS V3 measurement device, Dayton Audio took everything customers love about the DATS V2 and improved upon the accuracy, capability, reliability, convenience, and flexibility.FeaturesFor professionals and hobbyists--design and tune speaker systems and arraysAccurate measurement of loudspeaker electromechanical parameters (Fs, Qts, Vas, and many more)Measurement of advanced Wright Model parameters (Kr, Xr, Ki, Xi) for precision simulationsSoftware signal generator with selectable waveform, frequency, and amplitudeOscilloscope software mode with dual traces, plus adjustable time and amplitude scalesConnects to your PC via USB portCompact, portable, accurate, affordableOptional under desk mounting brackets to save desk spaceMeasurementsThe DATS V3 software provides you with an array of tools that are great for all speaker designersMeasures T/S ParametersLinearity TestEfficient Pass/Fail WorkflowCalculates VAS from MmdResistor MeasurmentSignal Generator with 10 different functionsMeasures advanced Wright Model parametersRub and Buzz DetectionOscilloscope with dual tracesCapacitor MeasurementT/S Parameter MeasurementQuickly and accurately measure a drivers T/S parameters. Just attach the test leads directly to a driver\'s terminals and click \"Measure Free-Air Parameters\" and the impedance magnitude will be displayed on the graph along with the measured Re, Fs, Qts, Qes, Qms, and Le. Next add mass to the cone or mount the driver in a suitable test box and click \"Measure V(as)\" to derive the mechanical parameters such as Vas and Mms.Enclosure Tuning VerificationOnce your driver is mounted in an enclosure DATS V3 makes it easy to verify your system\'s overall tuning for vented enclosures or Q for sealed enclosures by using the \"Measure Free Air Parameters\" button. The system will run a quick sweep and plot the impedance magnitude making it easy to verify the actual tuning of your system.Verify Crossover Wiring and PerformanceOnce your speaker system is complete, you can run an \"Impedance Sweep\" to plot the overall system impedance. A quick comparison of the measured impedance to your modeled impedance makes it easy to ensure that your crossover is wired correctly and performing as intended.Oscilloscope and Signal GeneratorA software oscilloscope allows you to visually observe the behavior of a circuit when presented with or without stimuli. Used in conjunction with the built-in signal generator, you\'ll be able to hunt down any strange phenomena, or confirm that your system is running properly.Precision LCR MeterCapacitor MeasurementsAs a capacitance meter DATS V3 is in a league of its own. In seconds, it will measure all of a capacitor\'s electrical characteristics including capacitance, equivalent series resistance, Q, and even loss angle. DATS V3 is capable of accurately measure capacitance from 0.002 uF to 10,000 uF.Inductor MeasurementsMeasure both the inductance and DC resistance of a coil with just one click. The DATS V3 is accurate from 0.05 mH up to 100 mH.Resistor MeasurementsNaturally, DATS V3 is also perfect for measuring resistance. As a unique feature, it will also plot the impedance of a resistor allowing you to see just how non-inductive your resistors really are. Resistance measurements are accurate from 0.002 ohms up to 10,000 ohms.Join Our Speaker Building CommunityLearn more about DATS V3 from seasoned professionalsSpecification: Product DetailsBrandDayton AudioModelDATS V3Part Number390-807UPC848791006470Unit of MeasureEachWeight0.95Manuals & Resources: Dayton Audio DATS V3 Quick Start GuideDATS V3 AudioXpress ReviewDayton Audio DATS V3 BrochureDayton Audio DATS Measurement and Accuracy White PaperDATS_V3_setup.zipDayton Audio Manufacturer Warranty 11350454 848791006470 0.9600lbs 0.00 0.00 0.00
Dayton Audio
140.38 2026-08-18 751 In Stock

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Brand Dayton Audio
Shop more from PEX

UPC: 848791006470
SKU: PEX-390-807
Price:
$140.38Free shipping on orders over $129.00 on select PEX- items. Details
Buy in bulk & save 17% ($116.99 each)
Quantity:
751 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $140.38 ea X 1 qty = $140.38
Quantity Price Save
1+ $140.38 0%
5+ $116.99 17%
This item is excluded from use of other offer, discount or coupon.

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products.

Product Description

Manufacturer Part Number: DATS V3

Dayton Audio has taken the most complete and easy-to-use audio test system and improved it in almost every way when creating the DATS V3 Computer Based Audio Component Test System. With improvements to the accuracy, capability, and reliability of the DATS V2, the DATS V3 sets a new standard for quick and accurate audio component measurements.

Key Features:
  • Rugged aluminum housing with detachable test leads and built-in precision calibration resistor
  • Tighter tolerances on internal components for more precise measurements
  • Increased output capability means greater separation from the noise floor, resulting in more accurate measurements
  • DATS Linearity Test for comparing parameters and impedance plots at multiple drive levels
  • Optional under desk mounting brackets included to save desk space
  • Only 1" H x 2-1/2" W x 4-1/8" D for easy portability


Overview:
Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System
The Perfect Companion for Audio Professionals

When designing the DATS V3 measurement device, Dayton Audio took everything customers love about the DATS V2 and improved upon the accuracy, capability, reliability, convenience, and flexibility.

Features

  • For professionals and hobbyists--design and tune speaker systems and arrays
  • Accurate measurement of loudspeaker electromechanical parameters (Fs, Qts, Vas, and many more)
  • Measurement of advanced Wright Model parameters (Kr, Xr, Ki, Xi) for precision simulations
  • Software signal generator with selectable waveform, frequency, and amplitude
  • Oscilloscope software mode with dual traces, plus adjustable time and amplitude scales
  • Connects to your PC via USB port
  • Compact, portable, accurate, affordable
  • Optional under desk mounting brackets to save desk space


Measurements



The DATS V3 software provides you with an array of tools that are great for all speaker designers

  • Measures T/S Parameters
  • Linearity Test
  • Efficient Pass/Fail Workflow
  • Calculates VAS from Mmd
  • Resistor Measurment


  • Signal Generator with 10 different functions
  • Measures advanced Wright Model parameters
  • Rub and Buzz Detection
  • Oscilloscope with dual traces
  • Capacitor Measurement


Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

T/S Parameter Measurement


Quickly and accurately measure a drivers T/S parameters. Just attach the test leads directly to a driver's terminals and click "Measure Free-Air Parameters" and the impedance magnitude will be displayed on the graph along with the measured Re, Fs, Qts, Qes, Qms, and Le. Next add mass to the cone or mount the driver in a suitable test box and click "Measure V(as)" to derive the mechanical parameters such as Vas and Mms.

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Enclosure Tuning Verification


Once your driver is mounted in an enclosure DATS V3 makes it easy to verify your system's overall tuning for vented enclosures or Q for sealed enclosures by using the "Measure Free Air Parameters" button. The system will run a quick sweep and plot the impedance magnitude making it easy to verify the actual tuning of your system.

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Verify Crossover Wiring and Performance


Once your speaker system is complete, you can run an "Impedance Sweep" to plot the overall system impedance. A quick comparison of the measured impedance to your modeled impedance makes it easy to ensure that your crossover is wired correctly and performing as intended.

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Oscilloscope and Signal Generator


A software oscilloscope allows you to visually observe the behavior of a circuit when presented with or without stimuli. Used in conjunction with the built-in signal generator, you'll be able to hunt down any strange phenomena, or confirm that your system is running properly.

Precision LCR Meter

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Capacitor Measurements


As a capacitance meter DATS V3 is in a league of its own. In seconds, it will measure all of a capacitor's electrical characteristics including capacitance, equivalent series resistance, Q, and even loss angle. DATS V3 is capable of accurately measure capacitance from 0.002 uF to 10,000 uF.

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Inductor Measurements


Measure both the inductance and DC resistance of a coil with just one click. The DATS V3 is accurate from 0.05 mH up to 100 mH.

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

Resistor Measurements


Naturally, DATS V3 is also perfect for measuring resistance. As a unique feature, it will also plot the impedance of a resistor allowing you to see just how non-inductive your resistors really are. Resistance measurements are accurate from 0.002 ohms up to 10,000 ohms.

Join Our Speaker Building Community



Learn more about DATS V3 from seasoned professionals

Specification:



Manuals & Resources:

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!