5 out of 5
Dayton Audio BSA-200 200W Bass Shaker Bridgeable Stereo Amplifier with Remote
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: BSA-200
Dayton Audio's BSA-200 bridgeable stereo amplifier is a perfect solution for bass shaker or subwoofer installs. The compact and powerful design makes the BSA-200 a versatile amplifier for home theater or gaming applications.
We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Key Features:
Overview:
Dayton Audio BSA-200 200W Bass Shaker Bridgeable Stereo Amplifier with Remote
The Dayton Audio BSA-200 high-power bass shaker amplifier is designed and built specifically to power tactile transducers but works equally as well as a dedicated subwoofer amplifier. Its small form factor makes it perfect for tight spaces, while the included brackets allow for vertical or horizontal mounting. The frequency and balance knobs let you dial in the desired crossover point and output, giving you total control over your set-up.
The Dayton Audio BSA-200 is rated at 110 watts RMS per channel into 2 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 230 watts RMS into a single 4 ohm load when bridged.
Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (not included). The Wave-Link system can link up to 5 receivers per transmitter giving you ultimate flexibility with remote mounting options.
Specifications: Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms (minimum impedance) bridged mono Input sensitivity: 170 mV Frequency Response: 5-200 Hz +/- 3 dB Variable low pass: 50-200 Hz Total harmonic distortion (stereo): 1%, (mono): 0.05% Signal to noise ratio: 91 dB @ 100 Hz A-weighted Power requirements: 110~240 VAC 50/60 Hz Max power consumption: 313W Stand-by power rating: 0.5W Auto turn-on sensitivity: 10 mV Remote: wired (12 ft. cable) Amplifier Topology: Class D Dimensions: 2.5" H x 9.5" W x 8.5" D.
1. Power Button
Press the Power button on the front panel of the BSA-200 to turn on and off the amplifier.
2. Power LED
The amplifier LED will be BLUE if the amplifier is active and ready to use. If the amplifier is in auto/standby mode the LED will be RED.
3. Frequency Adjustment
Rotate the frequency adjustment left or right to set the desired frequency output. The adjustment range is from 50Hz to 200Hz.
4. Balance Adjustment
Rotate the balance adjustment (stereo mode) left or right to set the desired output balance of left and right channels.
5. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level.
6. Remote
The included wired remote has volume adjustment and power button for your convenience but is not required to operate the amplifier. Connect the remote to the front panel, be careful to properly align the connector.
1. Line Out
Line output RCA L/R connectors can be used to connect (daisy chain) multiple BSA-200 amplifiers together. The number of amplifiers should be limited to 4 in this type of configuration.
2. Line In
Line input RCA L/R connectors for connection to your source device.
3. Auto Switch
Auto position enables the amplifier to turn on from standby mode when input signal is detected. The ON position will keep the amplifier in a continuous powered on mode.
4. Stereo / Bridge Switch
The BSA-200 can be used in stereo and bridge modes, in stereo mode L/R channels are separated, when used in bridge mode the L/R channels are combined as mono output.
5. USB
USB power output port can be used with the Dayton Audio Wave-Link wireless audio system or other power 5V devices.
6. Speaker Out
Speaker outputs are for stereo or bridge mode, the connectors are binding post style and will accept banana type connectors or bare wire.
7. Voltage Switch
This amplifier can accept 110V to 240V for either North American or European use. Make sure the amplifier is powered off and the cord unplugged before changing the voltage.
8. Fused Power Input
Connect included power cable to power input connector, then connect power source.
WARNING-DO NOT PLUG AMPLIFIER INTO ANY TYPE OF POWER CONDITIONER.
Below the power cable input is the fuse assembly. Disconnect power to amplifier before removing fuse assembly, pull straight out to access the main and spare fuse.
1. Power Button
Press the power button on the remote control to turn on and off the amplifier.
2. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level. There are 21 steps between silent and full gain.
With a Dayton Audio 5 year warranty, it's more than a guarantee, it's a promise. We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Specification:
Manuals & Resources:
Dayton Audio's BSA-200 bridgeable stereo amplifier is a perfect solution for bass shaker or subwoofer installs. The compact and powerful design makes the BSA-200 a versatile amplifier for home theater or gaming applications.
We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Key Features:
- Powerful 200 watt amplifier optimized for bass shaker installations
- Robust 2 ohm minimum impedance provides maximum output to bass shakers
- RCA line in and out for daisy chaining multiple units
- Adjustable 50-200 Hz low pass crossover for seamless audio integration
- Built-in USB port for powering 5V devices or use with wireless Dayton Audio Wave-Link technology
- Included wired remote provides convenient volume control
- Includes brackets for custom mounting solutions
Overview:
Dayton Audio BSA-200 200W Bass Shaker Bridgeable Stereo Amplifier with Remote
The Dayton Audio BSA-200 high-power bass shaker amplifier is designed and built specifically to power tactile transducers but works equally as well as a dedicated subwoofer amplifier. Its small form factor makes it perfect for tight spaces, while the included brackets allow for vertical or horizontal mounting. The frequency and balance knobs let you dial in the desired crossover point and output, giving you total control over your set-up.
The Dayton Audio BSA-200 is rated at 110 watts RMS per channel into 2 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 230 watts RMS into a single 4 ohm load when bridged.
Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (not included). The Wave-Link system can link up to 5 receivers per transmitter giving you ultimate flexibility with remote mounting options.
Specifications: Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms (minimum impedance) bridged mono Input sensitivity: 170 mV Frequency Response: 5-200 Hz +/- 3 dB Variable low pass: 50-200 Hz Total harmonic distortion (stereo): 1%, (mono): 0.05% Signal to noise ratio: 91 dB @ 100 Hz A-weighted Power requirements: 110~240 VAC 50/60 Hz Max power consumption: 313W Stand-by power rating: 0.5W Auto turn-on sensitivity: 10 mV Remote: wired (12 ft. cable) Amplifier Topology: Class D Dimensions: 2.5" H x 9.5" W x 8.5" D.
FRONT PANEL:
1. Power Button
Press the Power button on the front panel of the BSA-200 to turn on and off the amplifier.
2. Power LED
The amplifier LED will be BLUE if the amplifier is active and ready to use. If the amplifier is in auto/standby mode the LED will be RED.
3. Frequency Adjustment
Rotate the frequency adjustment left or right to set the desired frequency output. The adjustment range is from 50Hz to 200Hz.
4. Balance Adjustment
Rotate the balance adjustment (stereo mode) left or right to set the desired output balance of left and right channels.
5. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level.
6. Remote
The included wired remote has volume adjustment and power button for your convenience but is not required to operate the amplifier. Connect the remote to the front panel, be careful to properly align the connector.
REAR PANEL:
1. Line Out
Line output RCA L/R connectors can be used to connect (daisy chain) multiple BSA-200 amplifiers together. The number of amplifiers should be limited to 4 in this type of configuration.
2. Line In
Line input RCA L/R connectors for connection to your source device.
3. Auto Switch
Auto position enables the amplifier to turn on from standby mode when input signal is detected. The ON position will keep the amplifier in a continuous powered on mode.
4. Stereo / Bridge Switch
The BSA-200 can be used in stereo and bridge modes, in stereo mode L/R channels are separated, when used in bridge mode the L/R channels are combined as mono output.
5. USB
USB power output port can be used with the Dayton Audio Wave-Link wireless audio system or other power 5V devices.
6. Speaker Out
Speaker outputs are for stereo or bridge mode, the connectors are binding post style and will accept banana type connectors or bare wire.
7. Voltage Switch
This amplifier can accept 110V to 240V for either North American or European use. Make sure the amplifier is powered off and the cord unplugged before changing the voltage.
8. Fused Power Input
Connect included power cable to power input connector, then connect power source.
WARNING-DO NOT PLUG AMPLIFIER INTO ANY TYPE OF POWER CONDITIONER.
Below the power cable input is the fuse assembly. Disconnect power to amplifier before removing fuse assembly, pull straight out to access the main and spare fuse.
REMOTE CONTROL:
1. Power Button
Press the power button on the remote control to turn on and off the amplifier.
2. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level. There are 21 steps between silent and full gain.
With a Dayton Audio 5 year warranty, it's more than a guarantee, it's a promise. We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Specification:
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | BSA-200 |
| Part Number | 300-785 |
| UPC | 848791005497 |
| Unit of Measure | Each |
| Weight | 6.65 |
Product Specifications | |
|---|---|
| Power (RMS/Channel 8 ohms) | 26 - 50 Watts |
| Weight Range | < 10 lbs. |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By John I Pillow
Date: September 03, 2024
I am using this to power 2 Earthquake sound mqb-1. This perfect for those in my home theater
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By Ian Wilson
Date: May 18, 2024
Connected to four Aura bass shakers for the last couple of years. Still going strong, wired remote makes sense given the amp may well be hidden, although if it had used a different wireless technology this wouldn’t be necessary. I had to scratch the surface of the volume so I’d remember which button was which (in the dark) and the /- signs wear off easily. I also wish manufacturers would stop using bright blue lights, which can be very distracting in a darkened home theatre room. But these are minor quibbles and this product is very good value overall.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By captain kaos
Date: March 22, 2024
I added this coupled with the Dayton Audio BST-1s to my couch. It really increases the immersive effect especially in action movies. Positively startling for explosions, crashes, aircraft sounds. My wife is usually skeptical about changes like this, but she liked it as well.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By David
Date: February 08, 2024
Eh, not much going on. Get a bigger one!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Kurtles
Date: September 26, 2023
It does what it says it does. Works great with the BST-1 transducers. I've got 4 of them hooked up and it does as advertised.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By Seb
Date: July 06, 2023
I just dove into the world of bass shakers after being curious for years. It’s one of the best upgrades I ever made. I don’t have a dedicated home theater room and I have kids. For that reason, I like that the unit is compact and doesn’t have any buttons that kids could tamper with. At this price point, this specialized amp competes with some lower cost “regular amps” from Behringer and others. I like that this amp runs cool and does not have fan noise, which was important to me. I’m happy with my purchase and am glad this specialized unit exists. The manual is a little light but the online support team is knowledgeable and quick to respond. The wired remote that comes with it is an interesting concept, although if you have a spare subwoofer out on your processor to use it would be more convenient to manage levels via that. The volume dial has 20 clicks total, each an adjustment worth 5 in volume. It’s not great that the unit loses the last volume setting when disconnected from power for a while, but I can live with noting down my preferred setting and dialing back in when needed. I was initially worried whether this amp would have enough power to drive my earthquake MBQ-1 but it’s got plenty of headroom. I had to turn it down quite a bit to blend it with my system. I still have it on the punchier side, but the amp is still capable of more. I feel like $199 would be an incredible price/value for a device like this - since it’s pretty specialized and I likely would not use this to power speakers - but even at the $279 I paid I’m happy with the purchase.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]