0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: FTX1025
The Celestion FTX1025 10" coaxial speaker's high-strength LF/HF motor, Polyimide diaphragm HF driver, and FEA-optimized design produce high output and minimal distortion.
Key Features:
Overview:
Celestion FTX1025 10" Coaxial Full-Range Professional Driver
Celestion's FTX1025 10" coaxial loudspeaker produces generous amount of low-distortion output despite its compact form factor. The FTX1025 offers resolution and accuracy that are suitable for professional "fill" loudspeakers, stage monitor wedges, studio monitors, or high-efficiency home audio systems. Power handling is 600 watts continuous program; combined with the driver's high efficiency, this results in very good maximum output. The FTX1025's large-format HF compression driver permits an exceptionally low crossover point of 2,000 Hz, which offers a more consistent directivity transition from LF cone to HF horn.
Specification:
Manuals & Resources:
The Celestion FTX1025 10" coaxial speaker's high-strength LF/HF motor, Polyimide diaphragm HF driver, and FEA-optimized design produce high output and minimal distortion.
Key Features:
- Coaxial HF driver with 1" voice coil, Polyimide diaphragm, and 100° X 100° coverage
- High-energy ferrite magnet shared by LF and HF components
- Woofer's edge-wound CCA 2.5" voice coil ensures good power handling
- 2 kHz recommended crossover point
- Use with passive or active crossover (not included)
Overview:
Celestion FTX1025 10" Coaxial Full-Range Professional Driver
Celestion's FTX1025 10" coaxial loudspeaker produces generous amount of low-distortion output despite its compact form factor. The FTX1025 offers resolution and accuracy that are suitable for professional "fill" loudspeakers, stage monitor wedges, studio monitors, or high-efficiency home audio systems. Power handling is 600 watts continuous program; combined with the driver's high efficiency, this results in very good maximum output. The FTX1025's large-format HF compression driver permits an exceptionally low crossover point of 2,000 Hz, which offers a more consistent directivity transition from LF cone to HF horn.
Specification:
Product Details | |
|---|---|
| Brand | Celestion |
| Model | FTX1025 |
| Part Number | 294-2510 |
| UPC | 739894599658 |
| Unit of Measure | Each |
| Weight | 11.4 |
Product Specifications | |
|---|---|
| Nominal Diameter | 10" |
| Power Handling (RMS) | 300 Watts |
| Power Handling (MAX) | 600 Watts |
| Impedance | 8Ω |
| Frequency Response | 60 to 20,000Hz |
| Sensitivity | 96dB 2.83V/1m |
| Voice Coil Diameter | 2.5" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 71.5Hz |
| DC Resistance (Re) | 5.42Ω |
| Voice Coil Inductance (Le) | 0.48mH |
| Mechanical Q (Qms) | 2.788 |
| Electromagnetic Q (Qes) | 0.523 |
| Total Q (Qts) | 0.44 |
| Compliance Equivalent Volume (Vas) | 0.91ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.15mm/N |
| BL Product (BL) | 12.3T·m |
| Diaphragm Mass Inc. Airload (Mms) | 32.55g |
| Maximum Linear Excursion (Xmax) | 5mm |
| Surface Area of Cone (Sd) | 346.36cm² |
Materials of Construction | |
|---|---|
| Cone Material | Paper / Kevlar |
| Surround Material | Cloth |
| Voice Coil Wire Material | Aluminum |
| Voice Coil Former | Fiberglass |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 10.24" |
| Baffle Cutout Diameter | 9.25" |
| Depth | 4.84" |
| # Mounting Holes | 4 |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item