5 out of 5
Customer Reviews
By
Kelly Area
Date: November 26, 2025
Used to fix the startup noise on a 2014 CRV. Perfect fix. Need to trim length to match stock and that's about it.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
richard weaver
Date: August 05, 2025
Worked perfect no more issues
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Joseph Wappel
Date: August 04, 2025
They worked perfectly.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Camden Pierce
Date: June 18, 2025
Good for the money I spent just pretty sturdy for the spring and size of it
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
Art lover
Date: May 29, 2025
I used these springs in my Yost 750-DI bench vise to fix about the only serious design flaw that vise has. The vise is designed to rotate about its base, and there's an internal locking ring that keeps it from rotating which is tightened and loosened with two bolts. This locking ring binds-up pretty easily, so I put these springs around the locking ring bolts, positioned between the locking ring and vise body. Now, when I loosen the bolts, these springs push the locking ring away from the vise body, preventing the ring from binding. I can't vouch for these springs' longevity, but they're the right size and work well enough for my purpose.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kaztheatre
Date: March 04, 2025
I needed a compression spring to fit over a 1/4" bolt to keep tension on the bolt when tightened with a wing nut. This spring was a great fit.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
carlosj
Date: March 03, 2025
Great value for the money even though i expected the springs to wider and taller but i found some other use than what i ordered them for.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Dr Mike
Date: February 25, 2025
Took a chance on these springs, and they were perfect. I am using three of them on a secondary mirror holder for a telescope. The length and diameter were spot-on. The spring rate was just right for my needs to keep the mirror mount in place no mater which direction the telescope is pointed. I would buy these again for my next project.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kevin the dad
Date: February 23, 2025
I used these to fix a stovetop percolator, because the original spring broke off. They held up. I still use the percolator, which is over 20 years old.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kevin W.S.
Date: November 12, 2024
Worked good
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kevin W.S.
Date: November 12, 2024
Worked good
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Dori Tate
Date: September 28, 2024
It is a spring so not much to say. However, their specs are wrong. They say the solid height is .461", which is incorrect. The solid height is .905". Fix the spec so people can design mating parts correctly and it is 5 stars. Fortunately, I did not trust their spec and gave my design some room.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Robert
Date: September 13, 2024
Worked fine for me
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Brian B.
Date: August 16, 2024
Original spring from manufactured was no longer available ...... perfect trigger spring replacement for my 1941 - Number 102, Model 36 - 500 Shot Daisy BB Rifle. An antique now, given to me as a child from my Uncle. Shoots like new ......
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Mr. Geweke
Date: June 25, 2024
Not firm hard to press heavy duty, just perfect for most application.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
GoEagles
Date: June 19, 2024
The quality, finish and heft of the product feel very good. I used this in a Jack to support 2x4s over head and it worked great. I bought more! Price was better than other sites.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
me. dan
Date: May 31, 2024
The springs arrived a day ahead of schedule, well packed, and in good shape. I'm very pleased with them as there diameter perfectly fits my guide bars and I believe will work great. They are 1/2" longer than what was recommended, but I don't see that as an issue as if it is, I'm sure there will be enough space to allow for the extra 1/2". If nothing else, I can make a 1/2" depression where the vise face meets the guide bars and that should allow for the extra 1/2" without any problem.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Peter D.
Date: March 01, 2024
Used these on a Troy Built garden tiller, the height control retention mechanism. Fit perfectly, and is heavier than OEM. Much cheaper than replacement from manufacturer. Great deal!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
B. Lozano
Date: February 13, 2024
Used this to change the spring inside the Honda CRV VTC actuator. It works perfect.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
S. K.
Date: February 11, 2024
These springs were the perfect diameter, length, and springiness to get this particular old style Fiskars cutters working again after I lost the original spring years ago. Couldn't find any suitable replacement springs in local hardware stores. Only needed one, but now I have three spare.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]