skip to footer block
EAT CTA 5405 Ford Dipstick Extractor P12761363EAT-CM5405 https://cdnimages.opentip.com/full/EAT/EAT-CM5405.jpg CTA 5405 Ford Dipstick Extractor Manufacturer Part Number: 5405For extracting broken dipstick tubes, a common issue on Ford 4.6L, 5.4L, 6.2L & 6.8L Engines during engine service. When the dipstick tube breaks off, a piece remains at entry point, located at the bottom of the engine block (near the oil pan). Use the extractor to thread into tube to remove. Use with #5401 Thread Adapter Tool and any standard thread (5/8\"-18 TPI) slide hammer to properly remove the stuck dipstick tube. 12761363 0053001054053 0.6500lbs 2.00 2.00 4.00
CTA
28.5600 2025-03-28 8 In Stock
customer review - by , October 10, 2023
4/ 5stars
My dipstick replacement was a nightmare. Would up having to drop oil pan and drilling it out from inside block.It was seized in there to the point where even the drill bit had to fight it loose from the block.Ugh!
customer review - by , May 5, 2023
5/ 5stars
Of course unless the motor is out, a slide hammer isn't happening. I locked a pair of vise grips on the tool after I got it turned in as far as I thought it needed to go, gave it a squirt of KROIL, and gently tapped it with a hammer knocking it out, then side to side, seen alittle movement, and boom, knocked it out. I seen the Cadillac version of this tool on another site for 80 bucksso I call this a deal
customer review - by , April 4, 2023
5/ 5stars
Worked for what I needed it for first time needing one and probably want ever need it again but it works
customer review - by , May 5, 2022
5/ 5stars
Worked great. Had to get a little creative as you can see in the pic. If you have resources don't bother with the extra adapter. It is 3/8 course thread at the other end of the extractor. This one was very stubborn and you can see how rusted it was.
customer review - by , March 3, 2022
5/ 5stars
Used for my truck
customer review - by , January 1, 2022
5/ 5stars
I was at my Wit's End trying to remove a broken dipstick until I found this part. It took a little bit of working what was left of the dipstick back and forth but this tool actually worked and remove the broken dip stick from the block. Very pleased
customer review - by , January 1, 2022
5/ 5stars
Worked perfectly had the oil tube out in five minutes strongly recommend this tool
customer review - by , November 11, 2021
5/ 5stars
Envelope for product was unsealed and empty. Offered a replacement. But cant wait 3 weeks for this special tool.

CTA 5405 Ford Dipstick Extractor

stars Rating 5 | 8 reviews
Brand CTA
See other products from EAT

UPC: 0053001054053
SKU: EAT-CM5405
Price: $28.56
Quantity:
8 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Customer also purchased

Product Description

Manufacturer Part Number: 5405

  • For extracting broken dipstick tubes, a common issue on Ford 4.6L, 5.4L, 6.2L & 6.8L Engines during engine service.
  • When the dipstick tube breaks off, a piece remains at entry point, located at the bottom of the engine block (near the oil pan).
  • Use the extractor to thread into tube to remove.
  • Use with #5401 Thread Adapter Tool and any standard thread (5/8"-18 TPI) slide hammer to properly remove the stuck dipstick tube.

  • NOTE: All EAT- items are returnable, except for Open Box Scan Tools. scan tools/electronics, air tool are non-returnable

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Product Warranty

    This item has lifetime limited warranty.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Customer Reviews
    5 out of 5
    5 stars
    7
    4 stars
    1
    3 stars
    0
    2 stars
    0
    1 stars
    0
    By Bill
    Date: October 14, 2023
    My dipstick replacement was a nightmare. Would up having to drop oil pan and drilling it out from inside block.It was seized in there to the point where even the drill bit had to fight it loose from the block.Ugh!
    Rating: 4 stars [4 of 5 Stars!]
    By Cindy OKeefe
    Date: May 09, 2023
    Of course unless the motor is out, a slide hammer isn't happening. I locked a pair of vise grips on the tool after I got it turned in as far as I thought it needed to go, gave it a squirt of KROIL, and gently tapped it with a hammer knocking it out, then side to side, seen alittle movement, and boom, knocked it out. I seen the Cadillac version of this tool on another site for 80 bucksso I call this a deal
    Rating: 5 stars [5 of 5 Stars!]
    By Tiffany Stevens
    Date: April 20, 2023
    Worked for what I needed it for first time needing one and probably want ever need it again but it works
    Rating: 5 stars [5 of 5 Stars!]
    By Tim Brandt
    Date: May 08, 2022
    Worked great. Had to get a little creative as you can see in the pic. If you have resources don't bother with the extra adapter. It is 3/8 course thread at the other end of the extractor. This one was very stubborn and you can see how rusted it was.
    Rating: 5 stars [5 of 5 Stars!]
    By wayne allen
    Date: March 21, 2022
    Used for my truck
    Rating: 5 stars [5 of 5 Stars!]
    By Ron R
    Date: January 26, 2022
    I was at my Wit's End trying to remove a broken dipstick until I found this part. It took a little bit of working what was left of the dipstick back and forth but this tool actually worked and remove the broken dip stick from the block. Very pleased
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 6 of 8 reviews
     1  2  [Next]