0 reviews
Be the first to review this item!
Audio-Technica AT33MONO Mono Moving Coil Cartridge
Brand Audio-Technica
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: AT33MONO
The Audio-Technica 33MONO mono moving coil cartridge is designed specifically for use with mono vinyl records. The cartridge features a strong, rigid body and incorporates Hanenite rubber in the interior and cantilever fulcrum support to eliminate unnecessary vibrations.
Key Features:
Audio-Technica AT33MONO Mono Moving Coil Cartridge
The AT33MONO is designed specifically for use with mono vinyl records. Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The cartridge's 0.65 mil conical stylus is mounted on a hard duralumin cantilever for excellent sound reproduction and dependable performance. Because the AT33MONO does not easily pick up unnecessary strain components from distorted or scratched records, it produces mono audio of a much higher quality than that generated by a stereo cartridge. The cartridge features a strong, rigid body and incorporates Hanenite rubber in the interior and cantilever fulcrum support to eliminate unnecessary vibrations.
This cartridge with 0.6 mil conical stylus is not compatible with SP (standard play) shellac records. It is designed to play microgroove 33-1/3 and 45 RPM vinyl records.
Frequency response: 20-20,000 Hz
Vertical tracking angle: 23°
Vertical tracking force: 2.3-2.7 g (2.5 g standard)
Stylus construction: Nude square shank
Recommended load impedance: More than 100 ohms (when head amplifier is connected)
Coil impedance: 10 ohms (1 kHz)
DC resistance: 10 ohms
Coil inductance: 28 uH (1 kHz)
Output: 0.35 mV (at 1 kHz, 5 cm/sec)
Stylus shape: 0.65 mil conical
Cantilever: Aluminum pipe
Static compliance: 20 x 10-6 cm/dyne
Dynamic compliance: 6 x 10-6 cm/dyne (100 Hz)
Mount: Half-inch
Replacement stylus: AT-VMN95ML
Accessories included: Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm X 2, 19 mm X 2); plastic protector; brush; PCOCC lead wire set
Dimensions:16.0 mm (0.63") H X 16.6 mm (0.65") W X 26.5 mm (1.04") D
Weight: 6.9 g (0.24 oz)
The Audio-Technica 33MONO mono moving coil cartridge is designed specifically for use with mono vinyl records. The cartridge features a strong, rigid body and incorporates Hanenite rubber in the interior and cantilever fulcrum support to eliminate unnecessary vibrations.
Key Features:
- Dual moving coil cartridge designed specifically for use with mono vinyl records
- 0.65 mil conical stylus is mounted on a hard duralumin cantilever
- Strong, rigid body construction
- Hanenite anti-vibration, high-damping rubber in the housing interior and cantilever fulcrum support eliminates unnecessary vibrations
- PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
- High-quality brass fastening screw
- Compatible with stereo playback systems
Audio-Technica AT33MONO Mono Moving Coil Cartridge
The AT33MONO is designed specifically for use with mono vinyl records. Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The cartridge's 0.65 mil conical stylus is mounted on a hard duralumin cantilever for excellent sound reproduction and dependable performance. Because the AT33MONO does not easily pick up unnecessary strain components from distorted or scratched records, it produces mono audio of a much higher quality than that generated by a stereo cartridge. The cartridge features a strong, rigid body and incorporates Hanenite rubber in the interior and cantilever fulcrum support to eliminate unnecessary vibrations.
This cartridge with 0.6 mil conical stylus is not compatible with SP (standard play) shellac records. It is designed to play microgroove 33-1/3 and 45 RPM vinyl records.
Specifications:
Frequency response: 20-20,000 Hz
Vertical tracking angle: 23°
Vertical tracking force: 2.3-2.7 g (2.5 g standard)
Stylus construction: Nude square shank
Recommended load impedance: More than 100 ohms (when head amplifier is connected)
Coil impedance: 10 ohms (1 kHz)
DC resistance: 10 ohms
Coil inductance: 28 uH (1 kHz)
Output: 0.35 mV (at 1 kHz, 5 cm/sec)
Stylus shape: 0.65 mil conical
Cantilever: Aluminum pipe
Static compliance: 20 x 10-6 cm/dyne
Dynamic compliance: 6 x 10-6 cm/dyne (100 Hz)
Mount: Half-inch
Replacement stylus: AT-VMN95ML
Accessories included: Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm X 2, 19 mm X 2); plastic protector; brush; PCOCC lead wire set
Dimensions:16.0 mm (0.63") H X 16.6 mm (0.65") W X 26.5 mm (1.04") D
Weight: 6.9 g (0.24 oz)
Product Details | |
|---|---|
| Brand | Audio-Technica |
| Model | AT33MONO |
| Part Number | 240-5651 |
| Unit of Measure | Each |
| Weight | 0.4 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category