5 out of 5
Product Description
Manufacturer Part Number: R-VXA-M
Replacement for Marshall. Audio taper, 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
Measurements and Specs
Files
Replacement for Marshall. Audio taper, 24mm.
If additional nuts are needed, please see part number R-VM-NUT-2
Measurements and Specs
| Body Depth | 11.5 mm | |
| Body Width | 24 mm | |
| Bushing Length | 11.5 mm | |
| Bushing Thread | M8X0.75 | |
| Hex Nut Thickness | 2.0 mm | |
| Hex Nut Width | 11 mm | |
| Insulation Resistance | >100 MΩ at 500VDC | |
| Life | 15,000 cycles | |
| Manual Soldering Max Temp for 3 sec. | 350 °C | |
| Max. Working Voltage | 250V | |
| Max Rotational Stopper Strength | 6Kgf | |
| Operating (Useable) Temperature | -10 °C to +70 °C | |
| Rated Wattage (Power) | 0.25W | |
| Rotational Torque | 20-200 gf-cm | |
| Shaft Diameter | 6 mm | |
| Sliding Noise | <47 mV | |
| Tap Residual Resistance | ≤100 Ω | |
| Taper | Audio | |
| Tolerance | ±20% | |
| Total Rotational Angle | 300° ±5° | |
| Total Shaft Length | 21 mm | |
| Washer I.D. | 8.1 mm | |
| Washer O.D. | 14 mm | |
| Washer Thickness | 0.4 mm | |
| Withstand Voltage | 500 VAC for 1 min. |
| Packaging Dimensions | 1.5 in. × 1.4 in. × 1 in. | |
| Weight (Packaging) | 0.032 lbs. |
Files
| Specification Sheet for 1 MΩ | R-V1MA-M |
| Specification Sheet for 100 kΩ | R-V100KA-M |
| Specification Sheet for 22 kΩ | R-V22KA-M |
| Specification Sheet for 220 kΩ | R-V220KA-M |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By A Customer
Date: March 23, 2025
Despite being Alpha, these are full sized, well made and a good substitute for CTS pots. I know many people think that Alpha pots are inferior, but there arefull size pots that work great, feel good and cost third of the price. Don't be a brand snob give these a try.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Melvin
Date: November 18, 2024
Exactly as advertised, fast and good quality.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Dustin amp; Adrea
Date: October 04, 2024
5 stars on the replacement pot. 2 stars for the soldering tech (me). Works as it should!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By M. V.
Date: December 07, 2023
I put them in an old ibanez, and I didn't want to bore out the existing holes. They're a perfect fit and work exactly as expected.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Danny
Date: September 24, 2023
My friend bass was cutting out when he played it and brought it over to me to fix. He had dime sized cheap ppts in his and they were quit gritty when you turned them. I pit these in and they are super smooth and work great. I got the B ones, they are the audio taper ones. I will diffently buy this brand for all my needs. They are just as good as CT pots.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By wanker
Date: January 22, 2023
Not quite as nice as the top shelf CTS pots, but near half the price.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]