skip to footer block
ABT ABS Import Tools MT5 TO JT4 DRILL CHUCK ARBOR 3700 0124 P5283845ABT-3700-0124 https://cdnimages.opentip.com/full/ABT/ABT-3700-0124.jpg ABS Import Tools MT5 TO JT4 DRILL CHUCK ARBOR 3700 0124 Manufacturer part number: 3700-0124MT5 to JT4 Tang End Drill Chuck ArborMorse Taper to Jacobs Taper.For use with drill chucks with a JT4 mount.Hardened and ground. 5283845 3.8000lbs 0.00 0.00 0.00
ABS Import Tools
24.6800 2027-01-06 36 In Stock
customer review - by , November 11, 2025
5/ 5stars
Works perfect on my lathe tail stock. Good quality for the price.
customer review - by , June 6, 2025
5/ 5stars
I use this on my wood lathe, holds bits well, and as intended
customer review - by , December 12, 2024
5/ 5stars
Solid amp; Reliable.
customer review - by , November 11, 2024
5/ 5stars
I was impressed by the quality/price ratio.
customer review - by , July 7, 2024
5/ 5stars
I was surprised to get a finely finished, well made, sturdy chuck for this price. Excellent quality and great value. Thanks!
customer review - by , June 6, 2024
5/ 5stars
Great build quality for the price. Holds bits very well the jaws close very uniformly. No runout that can be seen, it performs wonderfully.
customer review - by , May 5, 2024
5/ 5stars
I used this chuck to replace the one that broke.
customer review - by , March 3, 2024
1/ 5stars
Broke the Morse taper first day we put it in a mag base
customer review - by , February 2, 2024
5/ 5stars
I'm a woodworker, so do not need machinist tolerances, but as close as possible is a nice to have. My Nova Viking was not running true, to the point that drilling with a 20mm forstener bit would cause so much friction that the chuck fell off. This solved my problem. I gave it a good clean with alcohol then was pleasantly surprised to see run out within 2-3 thou, better than the advertised tolerance. I would have liked it if the minimum bit was smaller than 1/8", but I'm not sure I can remember ever using a bit that small in my drill press anyway, so better to have a chuck with low runout. Would recommend.
customer review - by , December 12, 2023
5/ 5stars
If you plan on using this chuck on the tail stock instead of the head stock, you will have to saw off the end of the shaft. I did and it works just fine!

ABS Import Tools MT5 TO JT4 DRILL CHUCK ARBOR (3700-0124)

stars Rating 5 | 20 reviews
Shop more from ABT

SKU: ABT-3700-0124
Price: $24.68
Quantity:
36 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

You may also like

Product Description

Manufacturer part number: 3700-0124

  • MT5 to JT4 Tang End Drill Chuck Arbor
  • Morse Taper to Jacobs Taper.
  • For use with drill chucks with a JT4 mount.
  • Hardened and ground.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
By Jeffrey D.
Date: November 19, 2025
Works perfect on my lathe tail stock. Good quality for the price.
Rating: 5 stars [5 of 5 Stars!]
By Don
Date: June 02, 2025
I use this on my wood lathe, holds bits well, and as intended
Rating: 5 stars [5 of 5 Stars!]
By THOMAS
Date: December 25, 2024
Solid amp; Reliable.
Rating: 5 stars [5 of 5 Stars!]
By J. Pierson
Date: November 16, 2024
I was impressed by the quality/price ratio.
Rating: 5 stars [5 of 5 Stars!]
By EW
Date: July 28, 2024
I was surprised to get a finely finished, well made, sturdy chuck for this price. Excellent quality and great value. Thanks!
Rating: 5 stars [5 of 5 Stars!]
By Phil
Date: June 07, 2024
Great build quality for the price. Holds bits very well the jaws close very uniformly. No runout that can be seen, it performs wonderfully.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 19 reviews
 1  2  3  4  [Next]