5 out of 5
Dayton Audio DAEX32EP-4 Thruster 32mm Exciter 40W 4 Ohm
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Pricing Note
Product Description
Manufacturer Part Number: DAEX32EP-4
Turn even large, rigid surfaces into speakers with the Dayton Audio DAEX32EP-4 Thruster exciter!
Key Features:
Dayton Audio DAEX32EP-4 Thruster 32mm Exciter 40W 4 Ohm
Dayton Audio's DAEX32EP-4 Thruster exciter is built to turn large, thick, rigid surfaces into speakers. The 32 mm voice coil is attached to a steel spider for maximum restoring force when large amounts of power are applied, making it perfect for large glass panes, furniture, and surfaces that would normally resist the effects of an exciter.
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small Class D audio amplifiers, without sacrificing total output.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body ... just peel and stick! Two male spade quick-disconnect terminals are built onto the main body for quick electrical connection.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 40 watts RMS VCdia: 32 mm Nominal impedance: 4 ohms Re: 3.3 ohms Le: 0.21 mH Fs (uncoupled): 395 Hz Dimensions: 2.36" (60 mm) overall diameter x 0.98" (23 mm) total height Adhesive dimensions: 1.64" (41.75) outside diameter, 0.86" (21.75 mm) inside diameter Weight: 148 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Turn even large, rigid surfaces into speakers with the Dayton Audio DAEX32EP-4 Thruster exciter!
Key Features:
- Robust, heavy-duty design with a 32 mm voice coil attached to a steel spider
- Pre-applied 3M™ VHB™ adhesive for quick, secure installation
- Rare-earth neodymium motor and a proprietary two-layer voice coil
- 4-ohm impedance for use with small, Class D amplifiers
- 40 watt RMS power handling for high output
Dayton Audio DAEX32EP-4 Thruster 32mm Exciter 40W 4 Ohm
Dayton Audio's DAEX32EP-4 Thruster exciter is built to turn large, thick, rigid surfaces into speakers. The 32 mm voice coil is attached to a steel spider for maximum restoring force when large amounts of power are applied, making it perfect for large glass panes, furniture, and surfaces that would normally resist the effects of an exciter.
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small Class D audio amplifiers, without sacrificing total output.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body ... just peel and stick! Two male spade quick-disconnect terminals are built onto the main body for quick electrical connection.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 40 watts RMS VCdia: 32 mm Nominal impedance: 4 ohms Re: 3.3 ohms Le: 0.21 mH Fs (uncoupled): 395 Hz Dimensions: 2.36" (60 mm) overall diameter x 0.98" (23 mm) total height Adhesive dimensions: 1.64" (41.75) outside diameter, 0.86" (21.75 mm) inside diameter Weight: 148 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DAEX32EP-4 |
| Part Number | 295-230 |
| UPC | 848791000928 |
| Unit of Measure | Each |
| Weight | 0.3 |
Product Specifications | |
|---|---|
| Application | Full-Range Exciter |
| Power Handling (RMS) | 40 Watts |
| Impedance | 4Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Darryl C Evans
Date: November 02, 2023
Works like it should.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Stephane P. Cloutier
Date: October 26, 2023
First and foremost... understand that the sound emanates from the surface on which the exciter is mounted. per the old adage... horses for courses... your satisfaction will depend on a number of things. I have my exciters mounted on the exterior wall of a shower enclosure. I didn't want to blast podcasts in the morning in the bathroom, and wanted speakers in the shower. This is the perfect solution.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By L. Tate
Date: September 18, 2023
Works well. Bit of soldering needed to attach wires and audio plug, but that was easy.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Joao50
Date: September 11, 2023
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Joao50
Date: September 11, 2023
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Connor Price
Date: August 23, 2023
i attached these to some carbon fiber panels i had left over and the sound is unreal
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]