skip to footer block
PEX Dayton Audio DAEX25CT 4 Coin Type 25mm Exciter 10W 4 Ohm P5473447PEX-295-220 https://cdnimages.opentip.com/full/PEX/PEX-295-220.jpg Dayton Audio DAEX25CT 4 Coin Type 25mm Exciter 10W 4 Ohm Manufacturer Part Number: DAEX25CT-4Take your product or project to the next level by turning it into a speaker! The DAEX25CT-4 is designed by Dayton Audio with a 1\" voice coil for 10 watt RMS power handling, for more output than most of the other coin-type exciters.Key Features: Small size; just under 2\" diameter, about 9/16\" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 1\" voice coil for 10 watt RMS power handling Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 OhmDayton Audio\'s 25 mm DAEX25CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter\'s small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1\" voice coil allows for more input power for higher output applications while maintaining a slim-line form factor.To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.Note: An exciter\'s frequency response and sensitivity are completely dependent on the exciter\'s designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.Specifications: Power handling: 10 watts RMS VCdia: 25 mm Nominal impedance: 4 ohms Re: 3.6 ohms Le: 0.07 mH Fs (uncoupled): 306 Hz Dimensions: 1.89\" (48 mm) dia. x 0.59\" (15 mm) H Adhesive dimensions: 1.06\" (27 mm) outside diameter Weight: 74.6 grams.To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .Product Details BrandDayton Audio ModelDAEX25CT-4 Part Number295-220 UPC848791000973 Unit of MeasureEach Weight0.22 Product Specifications ApplicationFull-Range Exciter Power Handling (RMS)10 Watts Impedance4Ω 5473447 848791000973 0.24lbs 0.00 0.00 0.00
Dayton Audio
11.72 2023-07-05 2267 In Stock
customer review - by , January 1, 2022
5/ 5stars
Pulled off the adhesive backing, attached to the foam board, and it worked perfectly.
customer review - by , December 12, 2021
5/ 5stars
customer review - by , September 9, 2021
5/ 5stars
Good postage time
customer review - by , August 8, 2021
4/ 5stars
I used this for a science project and this device worked as lisited
customer review - by , August 8, 2021
5/ 5stars
Just installed as replacements for my atgames legends pinball after the original exciters blew after a month of use. These are definitely an upgrade and a better option in my opinion then the other ones people are using for this purpose, although slightly more expensive. Specs are closer to the original with an upgrade to 10 watts over the 3 watts on the cheap ones that come with the legends pinball. 4 ohms match the stock exciter and no extra amp is required to drive them, use the existing wiring.
customer review - by , June 6, 2021
5/ 5stars
This does what it is supposed to do and seems well built. I wish I had purchased one with more wattage however. my bad.
customer review - by , April 4, 2020
5/ 5stars
I'm in love with sound exciters. Well not really, but as somebody who has recently gotten involved in modding costumes, these are so nice compared to standard speakers which are easily muffled by fabric or require directionality for proper projection. As long as you have a solid surface somewhere in the costume, you can use these to create sound without having to hide the speaker grills. I'm using this exciter inside a Darth Vader chest box to project his famous breathing sound; it works well.
Share to:

Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm

stars Rating 5 | 7 reviews
Brand Dayton Audio
See other products from PEX

Upc: 848791000973
SKU: PEX-295-220
Price:
$11.72Free shipping on orders over $129 on select PEX- items. Details
Buy in bulk & save 20% ($9.37 each)
Quantity:
2267 In Stock
Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $11.72 ea X 1 qty = $11.72
Quantity Price Save
1+ $11.72 0%
10+ $10.34 12%
50+ $9.37 20%
This item is excluded from use of other offer, discount or coupon.

Optional related products

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products. NOTE: Items with a product code not beginning with PEX- in the order will still be charged a shipping fee.

Product Description

Manufacturer Part Number: DAEX25CT-4

Take your product or project to the next level by turning it into a speaker! The DAEX25CT-4 is designed by Dayton Audio with a 1" voice coil for 10 watt RMS power handling, for more output than most of the other coin-type exciters.

Key Features:
  • Small size; just under 2" diameter, about 9/16" high
  • Pre-applied 3M™ VHB™ adhesive for quick, durable installation
  • Rare-earth neodymium motor and a proprietary voice coil
  • 4-ohm impedance for use with small, Class D amplifiers
  • 1" voice coil for 10 watt RMS power handling


Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm

Dayton Audio's 25 mm DAEX25CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!

A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil allows for more input power for higher output applications while maintaining a slim-line form factor.

To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.

Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

Specifications: Power handling: 10 watts RMS VCdia: 25 mm Nominal impedance: 4 ohms Re: 3.6 ohms Le: 0.07 mH Fs (uncoupled): 306 Hz Dimensions: 1.89" (48 mm) dia. x 0.59" (15 mm) H Adhesive dimensions: 1.06" (27 mm) outside diameter Weight: 74.6 grams.

To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 out of 5
5 stars
6
4 stars
1
3 stars
0
2 stars
0
1 stars
0
By Dawn Horst
Date: January 20, 2022
Pulled off the adhesive backing, attached to the foam board, and it worked perfectly.
Rating: 5 stars [5 of 5 Stars!]
By Danjo Banjo
Date: December 23, 2021
Rating: 5 stars [5 of 5 Stars!]
By Shakeystudios
Date: September 19, 2021
Good postage time
Rating: 5 stars [5 of 5 Stars!]
By R. Putman
Date: August 28, 2021
I used this for a science project and this device worked as lisited
Rating: 4 stars [4 of 5 Stars!]
By TV Man
Date: August 26, 2021
Just installed as replacements for my atgames legends pinball after the original exciters blew after a month of use. These are definitely an upgrade and a better option in my opinion then the other ones people are using for this purpose, although slightly more expensive. Specs are closer to the original with an upgrade to 10 watts over the 3 watts on the cheap ones that come with the legends pinball. 4 ohms match the stock exciter and no extra amp is required to drive them, use the existing wiring.
Rating: 5 stars [5 of 5 Stars!]
By Brad_S
Date: June 29, 2021
This does what it is supposed to do and seems well built. I wish I had purchased one with more wattage however. my bad.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 7 reviews
 1  2  [Next]