skip to footer block
LNS Super Heavy Duty Camper Hold Down Brophy Hssf P12487796LNS-138-HSSF https://cdnimages.opentip.com/full/LNS/LNS-138-HSSF.jpg Super Heavy Duty Camper Hold Down Brophy Hssf Manufacturer Part Number: HSSFWider design fits the newest full size pickupsNo drilling requiredQuick, easy and secure installation, simply tighten two boltsNo projections into wheel wellExtra wide clamp for exceptional holding strengthMade of heavy 3/8\" x 3\" steelColor: Black Powder Coated FinishPack of: 4 12487796 784813030040 46.0000lbs 8.00 8.00 14.00
Brophy
164.6100 2025-04-25 41 In Stock
customer review - by , January 1, 2023
5/ 5stars
Make sure you know where your eye bolts on your camper are first! You can't adjust the brackets once the camper is on the bed of the truck (I found out) Used the mounts plus chain securements on my 2010 F350 to pick up a truck camper a thousand miles away. Had never used them before and never had a truck camper before. Looked at videos on how to mount them. The camper I bought had jacks that didn't work so it was a pain to use car jacks to lift a little here then support it then lift again on another jack to be able to get at the mounts to move them in the correct spot. Once I did that it they held great on the way back home. No issues at all with them
customer review - by , November 11, 2022
4/ 5stars
Finally put these on our 05 fx4 f150. Fitting them in the back of the bed was time consuming, but most things like this are for us. Been in use for 6 months now and still holding up nicely. These seemed to be the best thing out there for our use needs. Slide in pop up camper is being held in where it needs to be. Had to find/ make short enough tie downs, the double ended hook ones. The brackets on front of bed are a little farther back than we think they should be. But again they are holding, working and still in good shape. No rust yet.
customer review - by , November 11, 2022
5/ 5stars
The original running boards were almost rusted completely through only 4 years old. We don't think we'll have a problem with these because they are sturdier than the factory pair.
customer review - by , October 10, 2022
5/ 5stars
Well built
customer review - by , August 8, 2022
4/ 5stars
The bolts are hard to get in between the truck bed and the brackets but otherwise they work fine
customer review - by , August 8, 2022
5/ 5stars
On my 2nd set of these (sold my original set with the last camper and bought another) and couldn't be happier. I actually have them mounted and have the rails of a soft roll up tonneau cover over them. Best of both worlds. They are easy to install and hold my older sun lite slide-in in place with no issues. Down washboard and mild “off roaring” the camper stays in place. Well worth the money
customer review - by , August 8, 2022
4/ 5stars
Was a little difficult on first time installation. But worked great, held truck camper in place. No bad issues to talk about.
customer review - by , July 7, 2022
5/ 5stars
Value
customer review - by , July 7, 2022
5/ 5stars
Put these on my 15 F250 for my oversized slide in camper. I was worried at first since i have a terrible long dirt driveway and i drove terrible roads for hours. they stayed tight and secure the whole time with a set of turnbuckles. Perfect for what i need especially compared to spending 10x as much on frame mounts to only use it a few times a year. unless youre doing so serious extreme offroading, these will be perfectly fine.Highly recommend a set of timbrens as well.
customer review - by , December 12, 2021
5/ 5stars
I installed in my truck bed in about 30minutes. Put the camper on and was tied down solid in about 15 minutes. Camper is on solid.
  »  
  »  
  »  
  »  

Super Heavy-Duty Camper Hold Down (Brophy), Hssf, Price/BX

stars Rating 5 | 29 reviews
Brand Brophy
Shop more from LNS
UPC: 784813030040
SKU: LNS-138-HSSF
List Price: $168.99
Price: $164.61
Quantity:
41 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for BX.

Manufacturer Part Number: HSSF

  • Wider design fits the newest full size pickups

  • No drilling required

  • Quick, easy and secure installation, simply tighten two bolts

  • No projections into wheel well

  • Extra wide clamp for exceptional holding strength

  • Made of heavy 3/8" x 3" steel


Color: Black Powder Coated Finish
Pack of: 4

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Look Similar Items By Category

Tools & Home Improvement > Hardware > Tarps & Tie-Downs
Automotive > Exterior Accessories > Towing Products & Winches > Tow Hooks & Straps > Tie-Downs
Automotive > RV Parts & Accessories > Hitching & Towing > Tow Hooks & Straps > Tie-Downs
Customer Reviews
5 out of 5
see all 29 reviews
5 stars
22
4 stars
7
3 stars
0
2 stars
0
1 stars
0
Write a Review
By ken knutson
Date: January 08, 2023
Make sure you know where your eye bolts on your camper are first! You can't adjust the brackets once the camper is on the bed of the truck (I found out) Used the mounts plus chain securements on my 2010 F350 to pick up a truck camper a thousand miles away. Had never used them before and never had a truck camper before. Looked at videos on how to mount them. The camper I bought had jacks that didn't work so it was a pain to use car jacks to lift a little here then support it then lift again on another jack to be able to get at the mounts to move them in the correct spot. Once I did that it they held great on the way back home. No issues at all with them
Rating: 5 stars [5 of 5 Stars!]
By Jeffers
Date: November 28, 2022
Finally put these on our 05 fx4 f150. Fitting them in the back of the bed was time consuming, but most things like this are for us. Been in use for 6 months now and still holding up nicely. These seemed to be the best thing out there for our use needs. Slide in pop up camper is being held in where it needs to be. Had to find/ make short enough tie downs, the double ended hook ones. The brackets on front of bed are a little farther back than we think they should be. But again they are holding, working and still in good shape. No rust yet.
Rating: 4 stars [4 of 5 Stars!]
By Merry Freelove
Date: November 20, 2022
The original running boards were almost rusted completely through only 4 years old. We don't think we'll have a problem with these because they are sturdier than the factory pair.
Rating: 5 stars [5 of 5 Stars!]
By jeff arrendale
Date: October 20, 2022
Well built
Rating: 5 stars [5 of 5 Stars!]
By Clayton Dewees
Date: August 20, 2022
The bolts are hard to get in between the truck bed and the brackets but otherwise they work fine
Rating: 4 stars [4 of 5 Stars!]
By dave
Date: August 14, 2022
On my 2nd set of these (sold my original set with the last camper and bought another) and couldn't be happier. I actually have them mounted and have the rails of a soft roll up tonneau cover over them. Best of both worlds. They are easy to install and hold my older sun lite slide-in in place with no issues. Down washboard and mild “off roaring” the camper stays in place. Well worth the money
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 29 reviews
 1  2  3  4  5  [Next]