skip to footer block
DRA Qualtech DWTMHX24X2 m24 X 2 Carbon Steel Hex Die P4281663DRA-DWTMHX24X2 https://cdnimages.opentip.com/full/DRA/DRA-DWTMHX24X2.jpg Qualtech DWTMHX24X2 m24 X 2 Carbon Steel Hex Die Manufacturer Part Number: dwtmhx24x2For re-threading \"\"or cleaning\"\" bruised or rusty threadsIdeal for maintenanceCarbon steel hex shaped dieSize :m24 x 2Material :Carbon SteelFinish :Uncoated (Bright)Style :Hex DieCutting Direction :Right HandFlute Type :546030California residents: California Proposition 65California\'s Proposition 65 entitles California consumers to special warnings for certain products that contain chemicals above certain threshold levels.The general Proposition 65 notice is as follows: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.Proposition 65 notice for wood products is as follows: WARNING: Drilling, sawing, sanding or machining wood products generates wood dust, a substance known to the State of California to cause cancer. Use a respirator or other safeguards to avoid inhaling wood dust. 4281663 887861105286 2.0000lbs 2.00 4.00 6.00
Qualtech
22.2840 2027-01-06 137 In Stock
customer review - by , November 11, 2025
5/ 5stars
Good product. Does the job.
customer review - by , June 6, 2025
5/ 5stars
Did the trick to chase treads.
customer review - by , January 1, 2025
5/ 5stars
Corrected the threads on my old head bolts (which I ended up replacing anyway). This made my threads buttery smooth again and if the head bolts were something I felt comfortable reusing, this would be a must have and especially because it was an odd size to find. If I ever need to remove my ARP Head bolts, I will definitely use this to check those threads.
customer review - by , December 12, 2024
3/ 5stars
Item arrived rusted. Wire brush removed rust and finish on about 15% of the surface. Oiled to prevent further rust. Item kept as used infrequently.
customer review - by , October 10, 2024
5/ 5stars
It did the job. What else could one want?
customer review - by , July 7, 2024
5/ 5stars
Worked good for me until I misplaced it. May buy another. Used to Chase M14 x 1.5 threads and saved a bunch of parts. It seems like some reviewers are using as a threading tool. I do not think this die is designed to cut threads, but rather to chase or fix bad threads. I could
customer review - by , July 7, 2024
5/ 5stars
Good product. Worked well.
customer review - by , March 3, 2024
5/ 5stars
Saved me on some tire sales in shop. Used to clean up lig nut threads
customer review - by , January 1, 2024
5/ 5stars
Seems to be good quality. Worked well rethreading some hardened steel wheel bolts that were cross threaded
customer review - by , December 12, 2023
5/ 5stars
Fit was correct on my M14 1.5. It helped me fix the threads on my lug bolts after I almost ruined a couple of them. During the job I broke one of the teeth off the back end of the die, but it was because I was threading it on backwards.
  »  
  »  
  »  
  »  
  »  

Qualtech DWTMHX24X2 m24 X 2 Carbon Steel Hex Die

stars Rating 5 | 21 reviews
Brand Qualtech
Shop more from DRA
UPC: 887861105286
SKU: DRA-DWTMHX24X2
Price:
$22.28Free shipping on orders over $350.00 on select DRA- items. Details
Quantity:
137 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
You may also like
Qualtech DWTCS1-4X.7 m4 X .7 1 OD Carbon Steel Round Die
Qualtech DWTCS1-4X.7 m4 X .7 1 OD Carbon Steel Round Die
$5.57
Qualtech DWTC2-1428 1/4-28 UNF X 2 OD Carbon Round Die
Qualtech DWTC2-1428 1/4-28 UNF X 2 OD Carbon Round Die
$17.92
Qualtech DWTSMR212-24X1.5 m24 X 1.5 2-1/2 OD HSS Round Adjustable Die
Qualtech DWTSMR212-24X1.5 m24 X 1.5 2-1/2 OD HSS Round Adjustable Die
$101.10
Qualtech DWTC1-832 #8-32 UNC X 1 OD Carbon Round Die
Qualtech DWTC1-832 #8-32 UNC X 1 OD Carbon Round Die
$6.18
Qualtech DWTC112-1428 1/4-28 UNF X 1-1/2 OD Carbon Round Die
Qualtech DWTC112-1428 1/4-28 UNF X 1-1/2 OD Carbon Round Die
$9.70
Qualtech DWTC1316-080 #0-80 UNF X 13/16 OD Carbon Round Die
Qualtech DWTC1316-080 #0-80 UNF X 13/16 OD Carbon Round Die
$6.27
Qualtech DWTMR212-24X3 m24 X 3 2-1/2OD HSS Round Die
Qualtech DWTMR212-24X3 m24 X 3 2-1/2OD HSS Round Die
$52.87
Qualtech DWTC58-632 #6-32 X 5/8 OD UNC Carbon Round Die
Qualtech DWTC58-632 #6-32 X 5/8 OD UNC Carbon Round Die
$4.68
Qualtech DWTSQNPT18X2 1/8X 2 Carbon Steel Square NPT Pipe Die
Qualtech DWTSQNPT18X2 1/8X 2 Carbon Steel Square NPT Pipe Die
$39.12
Qualtech DWTSQ3816 3/8-16 Carbon Steel Square Bolt Die
Qualtech DWTSQ3816 3/8-16 Carbon Steel Square Bolt Die
stars 25
$34.21
Qualtech DWTCS3X.5S m3 X .5 Carbon Steel Tap Set
Qualtech DWTCS3X.5S m3 X .5 Carbon Steel Tap Set
$5.13
Qualtech DWTSR3-212 2-12 UNS X 3 OD HSS Round Adjustable Die
Qualtech DWTSR3-212 2-12 UNS X 3 OD HSS Round Adjustable Die
$131.40
Qualtech DWTSR2-151627 15/16-27 UNS X 2 OD HSS Round Adjustable Die
Qualtech DWTSR2-151627 15/16-27 UNS X 2 OD HSS Round Adjustable Die
$62.65
Qualtech DWTSR4-2188 2-1/8-8 UNS X 4 OD HSS Round Adjustable Die
Qualtech DWTSR4-2188 2-1/8-8 UNS X 4 OD HSS Round Adjustable Die
$271.09
Qualtech DWTDS5/8 5/8 Die Stocks
Qualtech DWTDS5/8 5/8 Die Stocks
stars 20
$4.96
Qualtech DWTT0-80 #0-80 UNF Carbon Steel Taper Tap
Qualtech DWTT0-80 #0-80 UNF Carbon Steel Taper Tap
stars 103
$0.99
Qualtech DWTH1-256 #2-56 UNC X 1 OD HSS Round Adjustable Die
Qualtech DWTH1-256 #2-56 UNC X 1 OD HSS Round Adjustable Die
$7.16
Qualtech DWTSR1-636 #6-36 UNS X 1 OD HSS Round Adjustable Die
Qualtech DWTSR1-636 #6-36 UNS X 1 OD HSS Round Adjustable Die
$18.61
Qualtech DWTP0-80 #0-80 UNF Carbon Steel Plug Tap
Qualtech DWTP0-80 #0-80 UNF Carbon Steel Plug Tap
stars 105
$0.99
Qualtech DWTSR1316-360 #3-60 UNS X 13/16 OD HSS Round Adjustable Die
Qualtech DWTSR1316-360 #3-60 UNS X 13/16 OD HSS Round Adjustable Die
$16.39
Qualtech DWTB0-80 #0-80 UNF Carbon Steel Bottoming Tap
Qualtech DWTB0-80 #0-80 UNF Carbon Steel Bottoming Tap
$0.99
Qualtech DWTH212-3416 3/4-16 UNF X 2-1/2 OD HSS Round Adjustable Die
Qualtech DWTH212-3416 3/4-16 UNF X 2-1/2 OD HSS Round Adjustable Die
$40.90
Qualtech DWTMR1-10X1.25 m10 X 1.25 1OD HSS Round Die
Qualtech DWTMR1-10X1.25 m10 X 1.25 1OD HSS Round Die
$11.93
Qualtech DWTMR2-10X1.25 m10 X 1.25 2OD HSS Round Die
Qualtech DWTMR2-10X1.25 m10 X 1.25 2OD HSS Round Die
$34.26

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with DRA-, and you can get free shipping for an order of over  $350.00  consisting of only DRA- series products.

Product Description

Manufacturer Part Number: dwtmhx24x2

  • For re-threading ""or cleaning"" bruised or rusty threads
  • Ideal for maintenance
  • Carbon steel hex shaped die




    • California residents:
    California Proposition 65
    California's Proposition 65 entitles California consumers to special warnings for certain products that contain chemicals above certain threshold levels.
    The general Proposition 65 notice is as follows:
    WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
    Proposition 65 notice for wood products is as follows:
    WARNING: Drilling, sawing, sanding or machining wood products generates wood dust, a substance known to the State of California to cause cancer. Use a respirator or other safeguards to avoid inhaling wood dust.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
    Need more information?
    Our staff are available to answer any questions you may have about this item
    Request More Information

    Look Similar Items By Category

    Industrial & Scientific > Cutting Tools > Threading Dies > Hex Threading Dies
    Tools & Home Improvement > Power & Hand Tools > Hand Tools > Taps & Dies > Dies > Hex Threading Dies
    Customer Reviews
    5 out of 5
    see all 21 reviews
    5 stars
    20
    4 stars
    0
    3 stars
    1
    2 stars
    0
    1 stars
    0
    Write a Review
    By DevF
    Date: November 20, 2025
    Good product. Does the job.
    Rating: 5 stars [5 of 5 Stars!]
    By DCG
    Date: June 17, 2025
    Did the trick to chase treads.
    Rating: 5 stars [5 of 5 Stars!]
    By Dakota
    Date: January 29, 2025
    Corrected the threads on my old head bolts (which I ended up replacing anyway). This made my threads buttery smooth again and if the head bolts were something I felt comfortable reusing, this would be a must have and especially because it was an odd size to find. If I ever need to remove my ARP Head bolts, I will definitely use this to check those threads.
    Rating: 5 stars [5 of 5 Stars!]
    By mpd305
    Date: December 22, 2024
    Item arrived rusted. Wire brush removed rust and finish on about 15% of the surface. Oiled to prevent further rust. Item kept as used infrequently.
    Rating: 3 stars [3 of 5 Stars!]
    By Steve
    Date: October 25, 2024
    It did the job. What else could one want?
    Rating: 5 stars [5 of 5 Stars!]
    By B
    Date: July 04, 2024
    Worked good for me until I misplaced it. May buy another. Used to Chase M14 x 1.5 threads and saved a bunch of parts. It seems like some reviewers are using as a threading tool. I do not think this die is designed to cut threads, but rather to chase or fix bad threads. I could
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 6 of 21 reviews
     1  2  3  4  [Next]