skip to footer block
KEF Fox Shox 983 02 145 07 On Jeep Jk Ats Stabilizer 8.1' P14814314KEF-F7598302145 https://cdnimages.opentip.com/full/KEF/KEF-F7598302145.jpg Fox Shox 983 02 145 07 On Jeep Jk Ats Stabilizer 8.1' Manufacturer Part Number: 983-02-145Steering Stabilizer; 2.0 Adventure Series; Single; Aluminum; With Stabilizer And Clamp; With External ReservoirAttributes Type: Single Internal Design: Monotube Color: Black Diameter (IN): 2 Inch Finish: Anodized Material: Aluminum Includes Mounting Brackets: No Boot Color: No Boot Estimated Install Time (Hours): 1 Product Description The Factory Race Series 2.0 Stabilizer ATS utilizes an Adjustable Through Shaft (ATS) architecture that eliminates shaft fluid displacement throughout the stabilizer\'s entire travel in both directions. The external piggyback reservoir provides additional fluid capacity and utilizes an Internal Floating Piston (IFP) to separate the fluid from the nitrogen gas charge to eliminate cavitation. For increased control that can be tailored to any driving style and setup, an external adjuster provides 24 clicks of adjustment to fine tune the feel. The result is highly customizable and consistent damping of unwanted steering feedback in a single, bolt-on stabilizer. With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state. To overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space. The Factory Race Series 2.0 Stabilizer ATS includes application specific mounting hardware and is available in multiple clamp sizes for stock or aftermarket heavy duty tie-rods.Features & Benefits Body: 2.0 Inch Metal Impacted 6061-T6 Aluminum Will Resist Rust Over Time Body Plating: Clear-Anodized For A Durable Finish Reservoir: External Reservoir Design Separates Shock Oil From The High-Pressure Nitrogen Shaft: 5/8 Inch Hard Chrome Plated Heat-Treated Alloy Steel Piston: Race-Developed High-Flow Piston Design Seals: Redundant Sealing Pack System Main Seal, Wiper Seal, Scraper Seal Oil: JM92 Advanced Suspension Fluid For Improved Performance At Variable Temperatures Bushings: Quiet Nitrile Rubber Allows For Increased Suspension Articulation Adjustments: Adjuster - 24 Clicks Of Adjustability Limited 1 Year Warranty This Fits2007-2018 Jeep Wrangler JKPlease Click Here for Installation Instructions. 14814314 714686861328 6.8000lbs 0.00 0.00 0.00
Fox Shox
516.9500 2025-05-24 7 In Stock

Fox Shox 983-02-145 07-On Jeep Jk Ats Stabilizer 8.1'

Brand Fox Shox
Shop more from KEF

UPC: 714686861328
SKU: KEF-F7598302145
Price: $516.95
Quantity:
7 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 983-02-145

Steering Stabilizer; 2.0 Adventure Series; Single; Aluminum; With Stabilizer And Clamp; With External Reservoir

Attributes

  • Type: Single
  • Internal Design: Monotube
  • Color: Black
  • Diameter (IN): 2 Inch
  • Finish: Anodized
  • Material: Aluminum
  • Includes Mounting Brackets: No
  • Boot Color: No Boot
  • Estimated Install Time (Hours): 1


Product Description


The Factory Race Series 2.0 Stabilizer ATS utilizes an Adjustable Through Shaft (ATS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. The external piggyback reservoir provides additional fluid capacity and utilizes an Internal Floating Piston (IFP) to separate the fluid from the nitrogen gas charge to eliminate cavitation. For increased control that can be tailored to any driving style and setup, an external adjuster provides 24 clicks of adjustment to fine tune the feel. The result is highly customizable and consistent damping of unwanted steering feedback in a single, bolt-on stabilizer. With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state. To overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space. The Factory Race Series 2.0 Stabilizer ATS includes application specific mounting hardware and is available in multiple clamp sizes for stock or aftermarket heavy duty tie-rods.

Features & Benefits

  • Body: 2.0 Inch Metal Impacted 6061-T6 Aluminum Will Resist Rust Over Time
  • Body Plating: Clear-Anodized For A Durable Finish
  • Reservoir: External Reservoir Design Separates Shock Oil From The High-Pressure Nitrogen
  • Shaft: 5/8 Inch Hard Chrome Plated Heat-Treated Alloy Steel
  • Piston: Race-Developed High-Flow Piston Design
  • Seals: Redundant Sealing Pack System Main Seal, Wiper Seal, Scraper Seal
  • Oil: JM92 Advanced Suspension Fluid For Improved Performance At Variable Temperatures
  • Bushings: Quiet Nitrile Rubber Allows For Increased Suspension Articulation
  • Adjustments: Adjuster - 24 Clicks Of Adjustability
  • Limited 1 Year Warranty

This Fits

2007-2018 Jeep Wrangler JK

Please Click Here for Installation Instructions.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Shipping Restrictions

This product can't be shipped to the following regions: CA.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!