5 out of 5
Dayton Audio RSS210HF-4 8" Reference Series HF Subwoofer 4 Ohm
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: RSS210HF-4
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
Key Features:
Overview:
Dayton Audio RSS210HF-4 8" Reference Series HF Subwoofer 4 Ohm
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Specification:
Manuals & Resources:
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
Key Features:
- Extensively vented motor eliminates compression and allows quiet excursion
- Lightweight black anodized aluminum cone for rigidity and lower moving mass
- Suitable for sealed or vented enclosures
- Triple shorting ring motor for ultra-low distortion
- 2-layer coil for reduced back EMF
- Highest quality materials throughout for long-lasting performance
Overview:
Dayton Audio RSS210HF-4 8" Reference Series HF Subwoofer 4 Ohm
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Specification:
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | RSS210HF-4 |
| Part Number | 295-456 |
| UPC | 844632062308 |
| Unit of Measure | Each |
| Weight | 8.8 |
Product Specifications | |
|---|---|
| Nominal Diameter | 8" |
| Power Handling (RMS) | 280 Watts |
| Power Handling (MAX) | 560 Watts |
| Impedance | 4Ω |
| Frequency Response | 27 to 1,000Hz |
| Sensitivity | 85.6dB 2.83V/1m |
| Voice Coil Diameter | 2" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 29.6Hz |
| DC Resistance (Re) | 3.1Ω |
| Voice Coil Inductance (Le) | 0.7mH |
| Mechanical Q (Qms) | 3.25 |
| Electromagnetic Q (Qes) | 0.69 |
| Total Q (Qts) | 0.57 |
| Compliance Equivalent Volume (Vas) | 0.84ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.37mm/N |
| BL Product (BL) | 8.12T·m |
| Diaphragm Mass Inc. Airload (Mms) | 78.4g |
| Maximum Linear Excursion (Xmax) | 9mm |
| Surface Area of Cone (Sd) | 219cm² |
Materials of Construction | |
|---|---|
| Cone Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 8.39" |
| Baffle Cutout Diameter | 7.28" |
| Depth | 4.88" |
| # Mounting Holes | 6 |
Parts Express Staff Recommended Enclosure Volume | |
|---|---|
| Sealed Volume | 0.9ft³ |
| Sealed F3 | 41Hz |
| Vented Volume | 1.25ft³ |
| Vented F3 | 23Hz |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By RK_Smooth
Date: February 16, 2025
Smooth action
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Blulou41
Date: February 10, 2025
Speakers are great no problem one had a small imperfection but didn’t affect the sound. So far so good.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Webb
Date: August 25, 2024
I had a blown mid-range speaker in my Infinity home speakers. Not only does it sound good but it was a perfect fit. Even the screw holes lined up. Great speaker and price.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Ricardo g.
Date: August 18, 2024
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By A Customer
Date: May 07, 2024
TCP115-8 is a "drop in" replacement for the Altic Lansing 5100 5.1 Speaker System. In fact, these seem to produce better sound than the original OEM 4" drivers. The OEM drivers had foam surround, which decompose over time. The new drivers have a rubber surround which seemly will have a longer life. Screw holes align exactly, only need to solder speaker leads. Speakers also include a foam sealing gasket. If you have an AL 5100 system, these new drivers will make your setup sound better than new.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Dale A. Tewes
Date: February 12, 2024
Good sounding speakers. Arrived on time and well packaged. Not much of a flange for the screws so the hole has to be PERFECT, or the speaker will fall through!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]