5 out of 5
Dayton Audio RS75-4 3" Reference Full-Range Driver 4 Ohm
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Pricing Note
Product Description
Manufacturer Part Number: RS75-4
Incorporating a low-distortion motor system with a copper ring, a copper cap, and an aluminum phase plug, the RS75-4 can outperform "boutique" drivers that cost several times the price.
Key Features:
Overview:
Dayton Audio RS75-4 3" Reference Full-Range Driver 4 Ohm
The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Incorporating a low-distortion motor system with a copper ring, a copper cap, and an aluminum phase plug, the RS75-4 can outperform "boutique" drivers that cost several times the price. Its low-distortion characteristics and smooth response provide exceptional clarity, detail, and dynamics. Features a black anodized cone, heavy-duty 4-hole cast frame, low-loss rubber surround, and gold terminals.
Specification:
Manuals & Resources:
Incorporating a low-distortion motor system with a copper ring, a copper cap, and an aluminum phase plug, the RS75-4 can outperform "boutique" drivers that cost several times the price.
Key Features:
- Full-range performance
- Low distortion and high resolution
- Aluminum frame, aluminum cone, rubber surround
- Distortion-reducing copper ring, copper cap, and aluminum phase plug
- Subtle yet high-tech look makes a bold cosmetic statement
- Designed and engineered in USA
Overview:
Dayton Audio RS75-4 3" Reference Full-Range Driver 4 Ohm
The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Incorporating a low-distortion motor system with a copper ring, a copper cap, and an aluminum phase plug, the RS75-4 can outperform "boutique" drivers that cost several times the price. Its low-distortion characteristics and smooth response provide exceptional clarity, detail, and dynamics. Features a black anodized cone, heavy-duty 4-hole cast frame, low-loss rubber surround, and gold terminals.
Specification:
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | RS75-4 |
| Part Number | 295-380 |
| UPC | 844632086281 |
| Unit of Measure | Each |
| Weight | 0.6 |
Product Specifications | |
|---|---|
| Nominal Diameter | 3" |
| Bolt Circle Diameter | 2.52 |
| Power Handling (RMS) | 15 Watts |
| Power Handling (MAX) | 30 Watts |
| Impedance | 4Ω |
| Frequency Response | 170 to 20,000Hz |
| Sensitivity | 85.2dB 2.83V/1m |
| Voice Coil Diameter | 0.63" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 177Hz |
| DC Resistance (Re) | 3.1Ω |
| Voice Coil Inductance (Le) | 0.72mH |
| Mechanical Q (Qms) | 5.76 |
| Electromagnetic Q (Qes) | 0.97 |
| Total Q (Qts) | 0.83 |
| Compliance Equivalent Volume (Vas) | 0.005ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.72mm/N |
| BL Product (BL) | 2.01T·m |
| Maximum Linear Excursion (Xmax) | 1.1mm |
| Surface Area of Cone (Sd) | 12cm² |
Materials of Construction | |
|---|---|
| Cone Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 2.83" |
| Baffle Cutout Diameter | 2.13" |
| Depth | 1.52" |
| # Mounting Holes | 4 |
Parts Express Staff Recommended Enclosure Volume | |
|---|---|
| Sealed Volume | 0.02ft³ |
| Sealed F3 | 200Hz |
| Vented Volume | 0.05ft³ |
| Vented F3 | 100Hz |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Ronrizz
Date: February 13, 2018
Using in dash as a midrange from 400 to 4000 hz. Very transparent, and smooth. Bought 4 more for other cars/projects.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Jason O.
Date: August 11, 2017
Beautiful sound for only being 334;! The VC dust cover (cone) adds a nice touch to the aesthetics. Went perfect with my diy speaker build.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Robert Harper
Date: February 04, 2017
I purchased these speakers to replace the 2-3/434; full range speakers on the dash of my Jeep Grand Cherokee WJ. Fun project. I used a first order crossover to block the bass at 180 Hz.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 3 of 3 reviews
1