0 reviews
Be the first to review this item!
Audio-Technica AT-VM95C/H Dual Moving Magnet Cartridge with Premounted Headshell
Brand Audio-Technica
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: AT-VM95C/H
The Audio-Technica VM95C/H dual moving magnet cartridge with premounted headshell delivers a powerful 4 mV output with excellent channel separation and low distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws with no nuts required.
Key Features:
Audio-Technica AT-VM95C/H Dual Moving Magnet Cartridge with Premounted Headshell
The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell.
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws - no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum for accurate playback both for DJs and causal listeners. A finger lift enables simple, precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws for connecting the headshell to a cartridge.
Frequency response: 20-20,000 Hz
Channel separation: 18 (dB at 1 kHz)
Vertical tracking angle: 23°
Vertical tracking force: 1.8-2.2 g (2.0 g standard)
Stylus construction: Bonded round shank
Recommended load impedance: 47,000 ohms
Coil impedance: 3.3 k ohms (1 kHz)
DC resistance: 485 ohms
Coil inductance: 550 mH (1 kHz)
Load capacitance: 100 to 200 pF
Output: 4.0 mV (1 kHz, 5 cm/sec.)
Channel balance: 2.5 dB (1 kHz)
Stylus shape: 0.6 mil conical
Cantilever: Aluminum pipe
Mount: Half-inch
Replacement stylus: AT-VMN95C
Accessories included: Two 11 mm installation screws, two 8 mm installation screws, two washers
Dimensions: 21.2 mm (0.83") H X 21.4 mm (0.84") W X 62.4 mm (2.46") D
Weight: 15.5 g (0.55 oz)
The Audio-Technica VM95C/H dual moving magnet cartridge with premounted headshell delivers a powerful 4 mV output with excellent channel separation and low distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws with no nuts required.
Key Features:
- VM dual magnet cartridge with 0.6 mil conical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws - no nuts or washers required
- Compatible with any AT-VMN95 replacement stylus
- Universal 1/2" mount headshell for 4-pin turntable cartridges
Audio-Technica AT-VM95C/H Dual Moving Magnet Cartridge with Premounted Headshell
The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell.
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws - no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum for accurate playback both for DJs and causal listeners. A finger lift enables simple, precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws for connecting the headshell to a cartridge.
Specifications:
Frequency response: 20-20,000 Hz
Channel separation: 18 (dB at 1 kHz)
Vertical tracking angle: 23°
Vertical tracking force: 1.8-2.2 g (2.0 g standard)
Stylus construction: Bonded round shank
Recommended load impedance: 47,000 ohms
Coil impedance: 3.3 k ohms (1 kHz)
DC resistance: 485 ohms
Coil inductance: 550 mH (1 kHz)
Load capacitance: 100 to 200 pF
Output: 4.0 mV (1 kHz, 5 cm/sec.)
Channel balance: 2.5 dB (1 kHz)
Stylus shape: 0.6 mil conical
Cantilever: Aluminum pipe
Mount: Half-inch
Replacement stylus: AT-VMN95C
Accessories included: Two 11 mm installation screws, two 8 mm installation screws, two washers
Dimensions: 21.2 mm (0.83") H X 21.4 mm (0.84") W X 62.4 mm (2.46") D
Weight: 15.5 g (0.55 oz)
Product Details | |
|---|---|
| Brand | Audio-Technica |
| Model | AT-VM95C/H |
| Part Number | 240-5625 |
| Unit of Measure | Each |
| Weight | 0.15 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category