5 out of 5
AC Infinity AIRBLAZE T14, Fireplace Blower Fan 14" with Temperature and Humidity Controller
* Click "Add to Cart" to calculate shipping and delivery time.
Product Description
- A quiet blower fan kit with smart controls, designed to boost airflow coming from your fireplace.
- Being a standard size, it can replace blowers found in Lennox, Hearth Glo, Majestic, Rotom, and other fireplaces.
- Programmable controller features temperature triggers, countdown timers, alarms, and 10 fan speeds.
- Features a DC-motor controlled using PWM for a truly quiet and energy efficient performance.
- Includes Wall Adapter | Dims.: 15.3 x 4.0 x 3.6 in. | Airflow: 200 CFM | Noise: 30 Dba | Bearings: Dual Ball
Product Description
A quiet blower fan kit designed to boost airflow coming from your home's fireplace. Suitable for fireplaces with space underneath its floor or compartment to install the blower. The system draws cool air in from the bottom vents, heats it through the fireplace, then forcing it out the top vent into the room.Being a standard size, it can also replace existing blowers found in various fireplaces including Lennox, Hearth Glo, Majestic, Rotom, and more. The system features a LCD display with smart thermostat and humidity programming. Included corded sensor plugs into the controller to provide temperature and humidity readings. Heavy-duty build includes a cold-rolled steel mounting frame. Features PWM-controlled motor that is highly efficient in maximizing airflow at lower noise. Includes everything needed to secure the unit and power it through an outlet.
Smart Programming
The controller included with each unit features active temperature and humidity monitoring. Fan speeds can be programmed to automatically adjust to high and low temperatures and humidity. The program can also be manually set the fans to run continuously or on a timer at custom speeds. Also features alarm warnings, fan failure alerts, eco-mode, and backup memory. Includes a 12-foot corded sensor probe.
Heavy-Duty Performance
The fan system is enclosed in heavy-duty steel mounted on a cold rolled steel frame. The aluminium impeller is suspended in mid-air with silicone mounts to absorb vibrations and to reduce noise. Utilizing DC motors that are controlled using PWM (Pulse Width Modulation), the blower can maximize airflow while reducing noise and power consumption. In addition, the blower is CE and RoHS certified and is IP-22 resistant to liquids and dust particles. The motor houses dual-ball bearings that are rated at 67,000 hours, allow this fan system to be mounted horizontally or vertically, and are certified by CE and RoHS.
| Product Identification | |
| Manufacturer | AC Infinity Inc. |
| Product Name | AIRBLAZE T14 |
| Product Model | AC-FBA14 |
| UPC Code | 819137020887 |
| Product and Mounting Dimensions - Fan Unit | |
| Total Dimensions | 15.3 x 4.0 x 3.6 in. (38.7 x 10.2 x 9.1 cm) |
| Mounting Frame Dimensions | 15.3 x 4.0 in. (38.7 x 10.2 cm) |
| Hole to Hole Distance | 14.6 x 2.9 in. (37.1 x 7.4 cm) |
| Screw Hole Size | Ø 0.197 in. (Ø 0.5 cm) |
| Cord Length to Controller | 72 in. (6 feet) |
| Product and Mounting Dimensions - Controller | |
| Total Dimensions | 5.19 x 2.91 x 1.06 in. (13.2 x 7.4 x 2.7 cm) |
| Hole to Hole Distance | 4.71 x 2.64 in. (12.0 x 6.7 cm) |
| Screw Hole Size | Ø 0.119 in. (Ø 0.3 cm) |
| Display Size | 3.5 x 1.4 in. (9 x 3.5 cm) |
| Cord Length to Plug | 72 in. (6 feet) |
| Sensor Probe Length | 144 in. (12 feet) |
| Product Performance and Technical Specs | |
| Total Airflow | 200 CFM |
| Total Noise | 30 dBA |
| Static Pressure | 5.46 mm-H2O |
| Operating Voltage | 12V DC |
| Power | 12 W |
| Current | 1 A |
| Wall Adapter Input | 100 to 240V AC |
| Operating Humidity | 35 to 85% RH |
| Operating Temperature | 0 to 158°F |
| Fan Bearings | Dual Ball |
| Mounting Positions | Horizontal or Vertical |
| L10 Life Expectancy | 67,000 Hours |
| CE Certification (Whole Product) | |
| RoHS Cert. (Whole Product) | |
| Product Manual | |
| Product Manual |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Anthony
Date: January 08, 2023
Used it on a wood burning stove that had blower but wanted something that can move more air. Easy to install and control.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By Anthony
Date: January 08, 2023
Used it on a wood burning stove that had blower but wanted something that can move more air. Easy to install and control.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Chris Douglass
Date: December 29, 2022
Very nice upgrade to the ancient fan and dial on my 2015 model natural gas fireplace. The unit moves a good amount of air very quietly. The original oem blower was noisy and I couldn't ever run it at full speed because it was annoying. This unit looks great, runs quietly and works automatically without any intervention. The toughest part is programming the unit Keep your manual with the fireplace for the next owner lol! Anyone can upgrade their fan motor with this kit. Just verify you have a free outlet and the adequate area to put the fan in the lower area below the firebox. A two year warranty is a plus also
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Casey Eichelberger
Date: December 11, 2022
Not much air flow coming off of it
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Jacob D
Date: December 03, 2022
Picture shows the T10 on top and T14 on bottom. I couldn't find any information on sizing for this. I first ordered the 10, but it was smaller than my original fan. I looked the opening under my fireplace and it looked like I had enough room to fit the 14 incher so I ordered that one - the idea being that it would push more air and I could run it at a lower speed. I'm happy with the purchase and it is much quieter than my old fan. I can run this at speed 7/10 and I don't feel like I need to adjust the volume of my TV to compensate. Airflow seems good, and I like the thermostat control. I used the included Velcro pads to mount mine to the back of my fireplace. They are plenty strong to hold it in place and even provide some vibration dampening.Cons:This could use some better instructions for mounting. For example, if I mount the temperature sensor in the cavity below the fireplace (as shown in the included booklet) and have a high temperature kick on the fan, then airflow increases in that cavity and instantly cools the sensor, causing the fan to turn off (even though the fireplace is still plenty hot). I ended up clamping the temp sensor in direct contact with the metal shield under my fireplace and the sensor read 35 degrees hotter than before. This is enough to keep the fan running when it needs to in order to distribute the heat.There are lots of wires and they are pretty long. The pictures in the ad make it look like you can easily hide the wires, but they stick out quite a couple of inches below the control pod. I just left my control pod out of sight so that the kids don't play with it. I set it to turn on when a high temperature is detected (something you can configure) and that is good enough for me.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Jacob D
Date: December 03, 2022
Picture shows the T10 on top and T14 on bottom. I couldn't find any information on sizing for this. I first ordered the 10, but it was smaller than my original fan. I looked the opening under my fireplace and it looked like I had enough room to fit the 14 incher so I ordered that one - the idea being that it would push more air and I could run it at a lower speed. I'm happy with the purchase and it is much quieter than my old fan. I can run this at speed 7/10 and I don't feel like I need to adjust the volume of my TV to compensate. Airflow seems good, and I like the thermostat control. I used the included Velcro pads to mount mine to the back of my fireplace. They are plenty strong to hold it in place and even provide some vibration dampening.Cons:This could use some better instructions for mounting. For example, if I mount the temperature sensor in the cavity below the fireplace (as shown in the included booklet) and have a high temperature kick on the fan, then airflow increases in that cavity and instantly cools the sensor, causing the fan to turn off (even though the fireplace is still plenty hot). I ended up clamping the temp sensor in direct contact with the metal shield under my fireplace and the sensor read 35 degrees hotter than before. This is enough to keep the fan running when it needs to in order to distribute the heat.There are lots of wires and they are pretty long. The pictures in the ad make it look like you can easily hide the wires, but they stick out quite a couple of inches below the control pod. I just left my control pod out of sight so that the kids don't play with it. I set it to turn on when a high temperature is detected (something you can configure) and that is good enough for me.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]