5 out of 5
Dayton Audio BSA-200 200W Bass Shaker Bridgeable Stereo Amplifier with Remote
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: BSA-200
Dayton Audio's BSA-200 bridgeable stereo amplifier is a perfect solution for bass shaker or subwoofer installs. The compact and powerful design makes the BSA-200 a versatile amplifier for home theater or gaming applications.
We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Key Features:
Dayton Audio BSA-200 200W Bass Shaker Bridgeable Stereo Amplifier with Remote
The Dayton Audio BSA-200 high-power bass shaker amplifier is designed and built specifically to power tactile transducers but works equally as well as a dedicated subwoofer amplifier. Its small form factor makes it perfect for tight spaces, while the included brackets allow for vertical or horizontal mounting. The frequency and balance knobs let you dial in the desired crossover point and output, giving you total control over your set-up.
The Dayton Audio BSA-200 is rated at 110 watts RMS per channel into 2 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 230 watts RMS into a single 4 ohm load when bridged.
Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (not included). The Wave-Link system can link up to 5 receivers per transmitter giving you ultimate flexibility with remote mounting options.
Specifications: Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms (minimum impedance) bridged mono Input sensitivity: 170 mV Frequency Response: 5-200 Hz +/- 3 dB Variable low pass: 50-200 Hz Total harmonic distortion (stereo): 1%, (mono): 0.05% Signal to noise ratio: 91 dB @ 100 Hz A-weighted Power requirements: 110~240 VAC 50/60 Hz Max power consumption: 313W Stand-by power rating: 0.5W Auto turn-on sensitivity: 10 mV Remote: wired (12 ft. cable) Amplifier Topology: Class D Dimensions: 2.5" H x 9.5" W x 8.5" D.
1. Power Button
Press the Power button on the front panel of the BSA-200 to turn on and off the amplifier.
2. Power LED
The amplifier LED will be BLUE if the amplifier is active and ready to use. If the amplifier is in auto/standby mode the LED will be RED.
3. Frequency Adjustment
Rotate the frequency adjustment left or right to set the desired frequency output. The adjustment range is from 50Hz to 200Hz.
4. Balance Adjustment
Rotate the balance adjustment (stereo mode) left or right to set the desired output balance of left and right channels.
5. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level.
6. Remote
The included wired remote has volume adjustment and power button for your convenience but is not required to operate the amplifier. Connect the remote to the front panel, be careful to properly align the connector.
1. Line Out
Line output RCA L/R connectors can be used to connect (daisy chain) multiple BSA-200 amplifiers together. The number of amplifiers should be limited to 4 in this type of configuration.
2. Line In
Line input RCA L/R connectors for connection to your source device.
3. Auto Switch
Auto position enables the amplifier to turn on from standby mode when input signal is detected. The ON position will keep the amplifier in a continuous powered on mode.
4. Stereo / Bridge Switch
The BSA-200 can be used in stereo and bridge modes, in stereo mode L/R channels are separated, when used in bridge mode the L/R channels are combined as mono output.
5. USB
USB power output port can be used with the Dayton Audio Wave-Link wireless audio system or other power 5V devices.
6. Speaker Out
Speaker outputs are for stereo or bridge mode, the connectors are binding post style and will accept banana type connectors or bare wire.
7. Voltage Switch
This amplifier can accept 110V to 240V for either North American or European use. Make sure the amplifier is powered off and the cord unplugged before changing the voltage.
8. Fused Power Input
Connect included power cable to power input connector, then connect power source.
WARNING-DO NOT PLUG AMPLIFIER INTO ANY TYPE OF POWER CONDITIONER.
Below the power cable input is the fuse assembly. Disconnect power to amplifier before removing fuse assembly, pull straight out to access the main and spare fuse.
1. Power Button
Press the power button on the remote control to turn on and off the amplifier.
2. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level.
With a Dayton Audio 5 year warranty, it's more than a guarantee, it's a promise. We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Dayton Audio's BSA-200 bridgeable stereo amplifier is a perfect solution for bass shaker or subwoofer installs. The compact and powerful design makes the BSA-200 a versatile amplifier for home theater or gaming applications.
We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Key Features:
- Powerful 200 watt amplifier optimized for bass shaker installations
- Robust 2 ohm minimum impedance provides maximum output to bass shakers
- RCA line in and out for daisy chaining multiple units
- Adjustable 50-200 Hz low pass crossover for seamless audio integration
- Built-in USB port for powering 5V devices or use with wireless Dayton Audio Wave-Link technology
- Included wired remote provides convenient volume control
- Includes brackets for custom mounting solutions
Dayton Audio BSA-200 200W Bass Shaker Bridgeable Stereo Amplifier with Remote
The Dayton Audio BSA-200 high-power bass shaker amplifier is designed and built specifically to power tactile transducers but works equally as well as a dedicated subwoofer amplifier. Its small form factor makes it perfect for tight spaces, while the included brackets allow for vertical or horizontal mounting. The frequency and balance knobs let you dial in the desired crossover point and output, giving you total control over your set-up.
The Dayton Audio BSA-200 is rated at 110 watts RMS per channel into 2 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 230 watts RMS into a single 4 ohm load when bridged.
Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (not included). The Wave-Link system can link up to 5 receivers per transmitter giving you ultimate flexibility with remote mounting options.
Specifications: Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms (minimum impedance) bridged mono Input sensitivity: 170 mV Frequency Response: 5-200 Hz +/- 3 dB Variable low pass: 50-200 Hz Total harmonic distortion (stereo): 1%, (mono): 0.05% Signal to noise ratio: 91 dB @ 100 Hz A-weighted Power requirements: 110~240 VAC 50/60 Hz Max power consumption: 313W Stand-by power rating: 0.5W Auto turn-on sensitivity: 10 mV Remote: wired (12 ft. cable) Amplifier Topology: Class D Dimensions: 2.5" H x 9.5" W x 8.5" D.
FRONT PANEL:
1. Power Button
Press the Power button on the front panel of the BSA-200 to turn on and off the amplifier.
2. Power LED
The amplifier LED will be BLUE if the amplifier is active and ready to use. If the amplifier is in auto/standby mode the LED will be RED.
3. Frequency Adjustment
Rotate the frequency adjustment left or right to set the desired frequency output. The adjustment range is from 50Hz to 200Hz.
4. Balance Adjustment
Rotate the balance adjustment (stereo mode) left or right to set the desired output balance of left and right channels.
5. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level.
6. Remote
The included wired remote has volume adjustment and power button for your convenience but is not required to operate the amplifier. Connect the remote to the front panel, be careful to properly align the connector.
REAR PANEL:
1. Line Out
Line output RCA L/R connectors can be used to connect (daisy chain) multiple BSA-200 amplifiers together. The number of amplifiers should be limited to 4 in this type of configuration.
2. Line In
Line input RCA L/R connectors for connection to your source device.
3. Auto Switch
Auto position enables the amplifier to turn on from standby mode when input signal is detected. The ON position will keep the amplifier in a continuous powered on mode.
4. Stereo / Bridge Switch
The BSA-200 can be used in stereo and bridge modes, in stereo mode L/R channels are separated, when used in bridge mode the L/R channels are combined as mono output.
5. USB
USB power output port can be used with the Dayton Audio Wave-Link wireless audio system or other power 5V devices.
6. Speaker Out
Speaker outputs are for stereo or bridge mode, the connectors are binding post style and will accept banana type connectors or bare wire.
7. Voltage Switch
This amplifier can accept 110V to 240V for either North American or European use. Make sure the amplifier is powered off and the cord unplugged before changing the voltage.
8. Fused Power Input
Connect included power cable to power input connector, then connect power source.
WARNING-DO NOT PLUG AMPLIFIER INTO ANY TYPE OF POWER CONDITIONER.
Below the power cable input is the fuse assembly. Disconnect power to amplifier before removing fuse assembly, pull straight out to access the main and spare fuse.
REMOTE CONTROL:
1. Power Button
Press the power button on the remote control to turn on and off the amplifier.
2. Volume Adjustment
Press the volume - or + button to adjust the amplifier output to the desired level.
With a Dayton Audio 5 year warranty, it's more than a guarantee, it's a promise. We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | BSA-200 |
| Part Number | 300-785 |
| UPC | 848791005497 |
| Unit of Measure | Each |
| Weight | 6.65 |
Product Specifications | |
|---|---|
| Power (RMS/Channel 8 ohms) | 26 - 50 Watts |
| Weight Range | < 10 lbs. |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Stevie Wonder
Date: February 24, 2023
I have only 1 tactile transducer and this amp powers it up adequately. I guess I was expecting more power, or thump, after making sure the bass configuration on the latest Denon A/V receiver was maxed out, then turning up the volume on this power amp to the max. I securely mounted the Dayton Audio BST-1 High Power Bass Shaker (50 Watts) to a 1/2 inch board and secured that to the recliner frame, then put a large 3 ft by 3 ft flat board under the recliner to separate it from the carpet. It is definitely noticed, but I thought it would be a stronger thump, as some have described.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By Adam
Date: May 17, 2022
So I purchased this along with four Dayton audio bass Shakers. I had no problem connecting for bay shakers together and wiring this up. I connected this to my system with a wireless receiver from SVS. In my rating I said this is almost perfect so here's a few things that need to be changed. Cut off level adjustment in balance adjustment need to have physical knobs instead of screw slots. And the other big thing this needs is a volume level indicator because you have no idea how loud you have this and you just adjust it by feel. Yes feel is very important but I volume level indicator or even making this a knob would be helpful with settings.Overall I am very pleased and satisfied and Would by again.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Damon
Date: February 26, 2022
I have this wired to 4 AuraSound AST-2B-4 Pro Bass Shaker Tactile Transducer installed in theater seat recliners in series. Works like a champ. Wish there were regular knobs on the balance and cross over settings, but once they are set you never really need to mess with them again. The Auto on/off works well and the amp does not get too hot.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 3 of 3 reviews
1