VHT CWRC818 Pewter **New**

Covered chrome lettering on a vehicle with this, and the color pops. It does come off of a vehicle but it's time consuming. Just cover the areas you don't want overspray the best you can. The more product you use the easier it comes off.

I needed a wet look for interior part so I thought this would do the job, WRONG, it was horrible. I tested it on a useless piece to see how it looked and worked. It did peal as it was supposed to, but the color was so flat that that I ended up using a gloss black from hardware store. I tried the stuff on my needed part, and it still failed to be a wet look or gloss in any way. I was very disappointed with the product.

Box came a pretty busted up with a lot of tape on it, but spray heads were clean and tops were not broken, so they appear to be new and should work fine

Good effect on black, cool material. Nozzle failed and popped off after first usage, so you have to clear and clean it yourself with mineral oil.

1. Start with a CLEAN car.2. Tape thoroughly! Anything not properly taped WILL end up with overspray on it. This includes door gaps.3. Make sure you purchase enough cans to cover your project. There are a number of websites or groups on social media that can provide with at least an estimate of how many you need for the size of your vehicle.4. If something doesnt look right, stop, peel, and start over. In my case, I did not follow my advice, and ended up with some orange peel texture on my hood. Not a big deal to me, but if you're a perfectionist, it might irritate you.5. If you have large areas to cover, make sure you have enough to cover at once. If the entire film is applied at once, I feel there is a lesser chance of orange peel texture developing.6. I applied from the bottom of the vehicle up, to reduce the chance of overspray particles settling below the area to be sprayed and possibly contaminating the next area I would move on to.7. Take your time when peeling the tape once you are finished. I did one final coat about 10 minutes prior to peeling the tape, and for the most part resaturating the film just prior to peeling tape allowed it to peel rather cleanly, though there was one or two spots that did not cleanly separate.

I put this on the chrome pieces on my Explorer. Applied as expected. However, this is not at all glossy.