skip to footer block
MEO Rheem Furnace Parts 51 102500 01 Blower Motor 1/2 hp 120/1/60 1075 rpm/4 speeds P7568647MEO-174313 https://cdnimages.opentip.com/full/MEO/MEO-174313.jpg Rheem Furnace Parts 51 102500 01 Blower Motor 1/2 hp 120/1/60 1075 rpm/4 speeds Manufacturer Part Number: 51-102500-01Part Description: Blower Motor Power Rating 1/2 HP Voltage Rating 120 Volt AC 1-Phase Frequency Rating 60 Hertz Motor FLA 6.3 Amp at 120 Volt Number of Speeds 4 Speed Rating 1075 RPM Application Gas Furnace Capacitance 7.5 Microfarad at 370 Volt 7568647 662766345032 18.0000lbs 0.00 0.00 0.00
Rheem Furnace Parts
159.8600 2025-04-28 Only 4 left In Stock
customer review - by , September 9, 2023
5/ 5stars
Fit perfect in my old unit.The tech said quality seemed good.Has been used all this summer and saved us from buying a new hvac system.
customer review - by , August 8, 2023
5/ 5stars
Air conditioner fan motor
customer review - by , June 6, 2023
4/ 5stars
The motor was the perfect replacement for the worn out one in my ancient A/C. Unfortunately, the wiring diagram is unclear. It is clear on which two wires to tie together in order to make the motor run clockwise or counter clockwise and it shows three wires going to line. It does show two of those line wires going to the capacitor, but it fails to point out which wire connects to which terminal on the capacitor. The third wire shown going to line actually connects to the contactor, but the diagram doesn't say that. Thanks to a little research I installed and wired my motor correctly the first time and I am sharing exactly which wires go where so you dont have to guess. Note that I replaced a three wire fan so if your fan has more than three wires I suppose you are still into some guesswork.First, the Black wire from you new motor connects to the contactor so be sure to note which terminal on the contactor your old fan was connected to before removing it.You must determine if you need your fan to turn CCW or CW. If the shaft of you motor is pointed at the ground when installed and the fan turns CCW when looking down at it from the top then simply use a wire nut to connect the Yellow and Brown wires together. They dont connect to anything else. Just each other.(Before using a wire nut I simply clipped my two wires together first as a test. When it worked correctly only then did I clip the ends off and wire nut them together.)Once thats done you connect the Purple wire to the FAN terminal on your capacitor and the Orange wire to the C or Common terminal.After mounting the motor and attaching the fan blades you are done. Replace and screw down the covers, go in the house, turn your A/C on and enjoy the blessed cool air. Congratulations! You just repaired your A/C for $150 rather than paying someone else $600 who only reluctantly makes the repair after you refuse to spend $3,000 on the new system they insist you need. You've probably already replaced the capacitor before determining the motor was bad so you'll now have a functioning problem free A/C for years to come.Note: If you need your fan to turn clockwise instead of CCW then use a wire nut to connect the Purple and Yellow wires together and connect the Brown wire to the FAN terminal on your capacitor. Everything else is the same. Youre just swapping the Brown and Purple wires.Due to delivery issues I went six days without A/C. With outside temps of 105 every day the heat had penetrated everything in the house like walls, cupboards and furniture. It took six hours for my old A/C to bring the temperature down from 95 degrees to 80 degrees. This motor ran non stop for that time without a hiccup. Its already 105 outside right now but its 75 in my house. Its still June so this motor is in for a workout. So far so good. This is a five star motor, but it gets only four because of the vague wiring instructions.
customer review - by , May 5, 2023
5/ 5stars
Air conditioner
customer review - by , November 11, 2022
5/ 5stars
Cut electric bill almost in half.
customer review - by , September 9, 2022
4/ 5stars
Motor packed well. Clear and straightforward wiring diagram. Install required me to flip the bolts around so the nuts are at the bottom to attach to mounting bracket. I ended up wiring my previous 3 wire system to the 4 wire option as this option ran 10 lower amperage. My only concerns are as follows: 1). Motor does not include a grommet sealing the wires coming out the motor, allowing easy moisture entry that could short out the windings. I sealed it with silicone. 2). Motor runs hot.We will see if this is reliable as my current motor lasted 30yrs.
customer review - by , August 8, 2022
5/ 5stars
I like that it came with new mounting screws, and easy to follow instructions for multiple applications. Multiple diagrams to match to your specific setup
customer review - by , August 8, 2022
5/ 5stars
My husband determined that it was the compressor in our AC that needed to be replaced.Our AC unit is a 1996 Ruud model UAKA - 042JAZ and we were told by the AC guy 10 years ago that we have a very good unit and as long as we keep up the maintenance, our unit was “a tank” We got the unit on Friday, and my husband replaced the compressor on Saturday morning and within a couple of hours, we had blissful cool air flowing upstairs.My husband took photos before removing the old unit and just connected the new one using the photos of the wires connected. He said the most time consuming thing was removing the old fan blade.
customer review - by , August 8, 2022
5/ 5stars
To remove fan from old motor, wire wheeled exposed old shaft to remove rust, sprayed some WD40 and tapped fan off old shaft. Reversed bolts on new motor, replaced fan and unit bolted onto grill no problems at all. Got the rotation wrong and swapped 2 wires (purple and brown?) Works great!
customer review - by , July 7, 2022
5/ 5stars
Just installed it all good so far! It ran smooth and quiet. Oh it was 106 degrees today.

Rheem Furnace Parts 51-102500-01 Blower Motor - 1/2 hp 120/1/60 (1075 rpm/4 speeds), Price/each

stars Rating 5 | 40 reviews
Shop more from MEO

UPC: 662766345032
SKU: MEO-174313
Price: $159.86
Quantity:
Only 4 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for each.

Manufacturer Part Number: 51-102500-01

Part Description:
  • Blower Motor
  • Power Rating 1/2 HP
  • Voltage Rating 120 Volt AC 1-Phase
  • Frequency Rating 60 Hertz
  • Motor FLA 6.3 Amp at 120 Volt
  • Number of Speeds 4
  • Speed Rating 1075 RPM
  • Application Gas Furnace
  • Capacitance 7.5 Microfarad at 370 Volt

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 stars
38
4 stars
2
3 stars
0
2 stars
0
1 stars
0
By Tiffany
Date: September 05, 2023
Fit perfect in my old unit.The tech said quality seemed good.Has been used all this summer and saved us from buying a new hvac system.
Rating: 5 stars [5 of 5 Stars!]
By Gigi
Date: August 06, 2023
Air conditioner fan motor
Rating: 5 stars [5 of 5 Stars!]
By West Texas
Date: June 21, 2023
The motor was the perfect replacement for the worn out one in my ancient A/C. Unfortunately, the wiring diagram is unclear. It is clear on which two wires to tie together in order to make the motor run clockwise or counter clockwise and it shows three wires going to line. It does show two of those line wires going to the capacitor, but it fails to point out which wire connects to which terminal on the capacitor. The third wire shown going to line actually connects to the contactor, but the diagram doesn't say that. Thanks to a little research I installed and wired my motor correctly the first time and I am sharing exactly which wires go where so you dont have to guess. Note that I replaced a three wire fan so if your fan has more than three wires I suppose you are still into some guesswork.First, the Black wire from you new motor connects to the contactor so be sure to note which terminal on the contactor your old fan was connected to before removing it.You must determine if you need your fan to turn CCW or CW. If the shaft of you motor is pointed at the ground when installed and the fan turns CCW when looking down at it from the top then simply use a wire nut to connect the Yellow and Brown wires together. They dont connect to anything else. Just each other.(Before using a wire nut I simply clipped my two wires together first as a test. When it worked correctly only then did I clip the ends off and wire nut them together.)Once thats done you connect the Purple wire to the FAN terminal on your capacitor and the Orange wire to the C or Common terminal.After mounting the motor and attaching the fan blades you are done. Replace and screw down the covers, go in the house, turn your A/C on and enjoy the blessed cool air. Congratulations! You just repaired your A/C for $150 rather than paying someone else $600 who only reluctantly makes the repair after you refuse to spend $3,000 on the new system they insist you need. You've probably already replaced the capacitor before determining the motor was bad so you'll now have a functioning problem free A/C for years to come.Note: If you need your fan to turn clockwise instead of CCW then use a wire nut to connect the Purple and Yellow wires together and connect the Brown wire to the FAN terminal on your capacitor. Everything else is the same. Youre just swapping the Brown and Purple wires.Due to delivery issues I went six days without A/C. With outside temps of 105 every day the heat had penetrated everything in the house like walls, cupboards and furniture. It took six hours for my old A/C to bring the temperature down from 95 degrees to 80 degrees. This motor ran non stop for that time without a hiccup. Its already 105 outside right now but its 75 in my house. Its still June so this motor is in for a workout. So far so good. This is a five star motor, but it gets only four because of the vague wiring instructions.
Rating: 4 stars [4 of 5 Stars!]
By linda a lewis
Date: May 11, 2023
Air conditioner
Rating: 5 stars [5 of 5 Stars!]
By ProTecTor
Date: November 24, 2022
Cut electric bill almost in half.
Rating: 5 stars [5 of 5 Stars!]
By Texasgirly
Date: September 12, 2022
Motor packed well. Clear and straightforward wiring diagram. Install required me to flip the bolts around so the nuts are at the bottom to attach to mounting bracket. I ended up wiring my previous 3 wire system to the 4 wire option as this option ran 10 lower amperage. My only concerns are as follows: 1). Motor does not include a grommet sealing the wires coming out the motor, allowing easy moisture entry that could short out the windings. I sealed it with silicone. 2). Motor runs hot.We will see if this is reliable as my current motor lasted 30yrs.
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 6 of 40 reviews
 1  2  3  4  5 ...  [Next]