skip to footer block
PSS Pro Maxima 48326 Pro Maxima Raptor Series P 1350 All Purpose Press P12217871PSS-48326 https://cdnimages.opentip.com/full/PSS/PSS-48326.jpg Pro Maxima 48326 Pro Maxima Raptor Series P 1350 All Purpose Press Manufacturer Part Number: 48326Features:Receive an all over workout with this piece of equipment.2\" x 4\" 11 gauge steel weight stack frame housing.Form fitted outer weight stack shield.Seat back adjustable from 30 - 90 Degrees to Shoulder press.ABS seat & back protective dishes.Seamless upholstery.Natural rubber handgrips.Five position seat adjustment.Bright red colored pull knobs.Instructional color placard.225 lb. Weight Stack.All pivoting axis have radial bearings.1/4\" Nylon coated aircraft cable driven.4800 lb. test.71\" L x 51\" W x 68\" H630 lbsAdjustable positions on all machines to accommodate all users to ensure correct bio-mechanical function. Adjustments are made with Heavy Duty spring loaded colored pull-pin knobs.Weight Stacks are adjusted with a tethered, magnetic selector pin that extends through the entire weight stack.Cable system with 1/4\" thick 4800 lb test military spec galvanized oil impregnated air craft cable finished with a tough nylon coating to 3/16\" thick.Manual tension adjusters on every machine for the cable adjustments.Weight stack plates are solid steel machined precisely to with in an oz of weight.Weight stack is accessible from a seated position.Weight stacks are enclosed in full length shrouds.Weight system allows user to increase by 5lb increments.Instructional guide charts used to inform correct usage for each machine along with anatomical highlights to show which muscle groups are being worked.Each machine is made with a lower starting weight stack and has counter-balanced arms when needed.Heavy-duty 40 oz. commercial grade marine Naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by thick plywood backing for stable support.Exceeds all ASTM requirements.Guide rods are 1\" CCRO ANSI 1045, solid steel hard chrome-plated with tensile strength of 75,000psi.Frames are constructed of High Stress 3/16\" ASTM A-500 grade B structural steel tubing (11 gauge) 2\"x4\", 2\"x3\" tubing. 2\"x3\" tubing on all uprights, 2\"x2\"x1/8\" ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross members and benches.All welds are ground down and stress tested.Custom color powder coat paint, 3 stage pre-paint preparatory process that includes a state of the art pellet blasting machine system that purifies steel. The steel is then sent through a preheat stage before the final magnetic paint powder is applied and baked for a long lasting hardened finish.Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 +/- 0, 10 and above in high-compression areas) and HR-150 (density pcf of 4.60 +/- 0.30).Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercise complete range of motion. All cams are 1/4\" thick solid steel. The cams are different for each machine to provide correct movement for the exercise.Shrouded pulley housing is 6\"x1/4\" thick solid steel.Pulley wheels are 4\" and 6\" solid fiberglass reinforced body with a 1/2\" cable groove. Oil dipped double sealed racer ball bearings with a 1/2\" axis shaft hole. Sealed for moisture and dust proof.The Standard Frame Color is Black, White and Gray, there would be an extra fee if you prefer other colors.Please click here for colors reference. 12217871 756.0000lbs 0.00 0.00 0.00
Pro Maxima
4426.9800 2025-04-27 In Stock
  »  
  »  
  »  
  »  
  »  

Pro Maxima 48326 Pro Maxima Raptor Series P-1350 All Purpose Press, Price/each

Brand Pro Maxima
Shop more from PSS
SKU: PSS-48326
Price: $4,426.98
Quantity:
Shipping:
$598.60 To [ 43215 ] Estimated Delivery Date: Jun 4, 2024 to Jun 6, 2024
In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for each.

Manufacturer Part Number: 48326

Features:
  • Receive an all over workout with this piece of equipment.
  • 2" x 4" 11 gauge steel weight stack frame housing.
  • Form fitted outer weight stack shield.
  • Seat back adjustable from 30 - 90 Degrees to Shoulder press.
  • ABS seat & back protective dishes.
  • Seamless upholstery.
  • Natural rubber handgrips.
  • Five position seat adjustment.
  • Bright red colored pull knobs.
  • Instructional color placard.
  • 225 lb. Weight Stack.
  • All pivoting axis have radial bearings.
  • 1/4" Nylon coated aircraft cable driven.
  • 4800 lb. test.
  • 71" L x 51" W x 68" H
  • 630 lbs
  • Adjustable positions on all machines to accommodate all users to ensure correct bio-mechanical function. Adjustments are made with Heavy Duty spring loaded colored pull-pin knobs.
  • Weight Stacks are adjusted with a tethered, magnetic selector pin that extends through the entire weight stack.
  • Cable system with 1/4" thick 4800 lb test military spec galvanized oil impregnated air craft cable finished with a tough nylon coating to 3/16" thick.
  • Manual tension adjusters on every machine for the cable adjustments.
  • Weight stack plates are solid steel machined precisely to with in an oz of weight.
  • Weight stack is accessible from a seated position.
  • Weight stacks are enclosed in full length shrouds.
  • Weight system allows user to increase by 5lb increments.
  • Instructional guide charts used to inform correct usage for each machine along with anatomical highlights to show which muscle groups are being worked.
  • Each machine is made with a lower starting weight stack and has counter-balanced arms when needed.
  • Heavy-duty 40 oz. commercial grade marine Naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by thick plywood backing for stable support.
  • Exceeds all ASTM requirements.
  • Guide rods are 1" CCRO ANSI 1045, solid steel hard chrome-plated with tensile strength of 75,000psi.
  • Frames are constructed of High Stress 3/16" ASTM A-500 grade B structural steel tubing (11 gauge) 2"x4", 2"x3" tubing. 2"x3" tubing on all uprights, 2"x2"x1/8" ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross members and benches.
  • All welds are ground down and stress tested.
  • Custom color powder coat paint, 3 stage pre-paint preparatory process that includes a state of the art pellet blasting machine system that purifies steel. The steel is then sent through a preheat stage before the final magnetic paint powder is applied and baked for a long lasting hardened finish.
  • Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 +/- 0, 10 and above in high-compression areas) and HR-150 (density pcf of 4.60 +/- 0.30).
  • Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercise complete range of motion. All cams are 1/4" thick solid steel. The cams are different for each machine to provide correct movement for the exercise.
  • Shrouded pulley housing is 6"x1/4" thick solid steel.
  • Pulley wheels are 4" and 6" solid fiberglass reinforced body with a 1/2" cable groove. Oil dipped double sealed racer ball bearings with a 1/2" axis shaft hole. Sealed for moisture and dust proof.



The Standard Frame Color is Black, White and Gray, there would be an extra fee if you prefer other colors.
Please click here for colors reference.


This item is overweight. we may contact you when we process the order.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
0 reviews
Be the first to review this item!
Write a Review