0 reviews
Be the first to review this item!
Parts Express High Power RGB LED 12-24 VDC 12A Slim Control Unit with 18-Key Magnetic Mounting RF Remote
Brand Parts Express
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
This slim high power RGB LED control unit, with RF controller, offers nearly unlimited potential for the use of RGB LED strip lighting (or up to 3 different single-color LED strips).
Key Features:
High Power RGB LED 12-24 VDC 12A Slim Control Unit with 18-Key Magnetic Mounting RF Remote
Hook up to 180W of RGB LED light strips to this 12 VDC 15A controller with RF remote. That's approximately 50 ft. of LED strips (3 x 16.6 ft.) at one time. It's recommended that you start each light strip at the controller to maintain color integrity. The controller works 5 to 24 VDC LED light strips also, but the wattage different, so make sure you match the power supply to your LED light strip voltage and wattage requirements within the controller's specifications. The controller has two screw holes 0.113" (3 mm) Dia. and 2.83" (72 mm) apart from center for mounting. Recommend #4 screws sold separately.
A 18-key RF remote control is included for quickly powering LED strips on or off, changing through millions of different colors, controlling brightness, or for using one of the 34 built-in color loop modes. The RF remote enables you to hide the controller and power supply out of sight. The remote comes with a small piece of metal with peal-and-stick adhesive on one side to adhere to an appliance, cabinet, or door jam. Once you put the piece of metal in a convenient location, place the remote on it and the magnet in the remote holds it there until ready to use.
On top of the controller is a built-in work status light. This light informs you if the controller's receiving a signal from the remote, power status, brightness and speed limit, overload protection, over heat protection, and new remote paired status. Check the attached manual for complete instructions.
Note: When using multiple controllers with one remote, make sure all controllers are in the same mode when reprogramming them to one remote.
Specifications: Working voltage: 5 to 24 VDC Output current: Up to 5A x 3 Peak power handling: 75W (5V), 180W (12V), 360W (24V) Dynamic mode: 34 modes Speed grade: 10 levels Static color: 30 colors Color brightness grade: 5 levels PMW grade: 4,000 steps: Remote frequency: 433.92 MHz Remote control distance: >15m at open area Remote dimensions: 3.43" H x 1.42" W x 0.315" D (87 x 36 x 8 mm) Control dimensions: 3.43" H x 0.95" W x 0.59" (87 x 24 x 15 mm) Certification: CE, RoHS Included remote battery: CR2032.
Key Features:
- 18-key RF remote for out-of-sight control
- Handles up to 180W using a 12 VDC 15A power supply sold separately
- Small footprint installs in tight spaces
- Includes a small metal plate with peal-and-stick adhesive for mounting the remote
- Over load, over heat, wrong wiring, and short-circuit protection built-in
- Work status indicator informs you that the controller received a signal and much more
- CE and RoHS certified
High Power RGB LED 12-24 VDC 12A Slim Control Unit with 18-Key Magnetic Mounting RF Remote
Hook up to 180W of RGB LED light strips to this 12 VDC 15A controller with RF remote. That's approximately 50 ft. of LED strips (3 x 16.6 ft.) at one time. It's recommended that you start each light strip at the controller to maintain color integrity. The controller works 5 to 24 VDC LED light strips also, but the wattage different, so make sure you match the power supply to your LED light strip voltage and wattage requirements within the controller's specifications. The controller has two screw holes 0.113" (3 mm) Dia. and 2.83" (72 mm) apart from center for mounting. Recommend #4 screws sold separately.
A 18-key RF remote control is included for quickly powering LED strips on or off, changing through millions of different colors, controlling brightness, or for using one of the 34 built-in color loop modes. The RF remote enables you to hide the controller and power supply out of sight. The remote comes with a small piece of metal with peal-and-stick adhesive on one side to adhere to an appliance, cabinet, or door jam. Once you put the piece of metal in a convenient location, place the remote on it and the magnet in the remote holds it there until ready to use.
On top of the controller is a built-in work status light. This light informs you if the controller's receiving a signal from the remote, power status, brightness and speed limit, overload protection, over heat protection, and new remote paired status. Check the attached manual for complete instructions.
Note: When using multiple controllers with one remote, make sure all controllers are in the same mode when reprogramming them to one remote.
Specifications: Working voltage: 5 to 24 VDC Output current: Up to 5A x 3 Peak power handling: 75W (5V), 180W (12V), 360W (24V) Dynamic mode: 34 modes Speed grade: 10 levels Static color: 30 colors Color brightness grade: 5 levels PMW grade: 4,000 steps: Remote frequency: 433.92 MHz Remote control distance: >15m at open area Remote dimensions: 3.43" H x 1.42" W x 0.315" D (87 x 36 x 8 mm) Control dimensions: 3.43" H x 0.95" W x 0.59" (87 x 24 x 15 mm) Certification: CE, RoHS Included remote battery: CR2032.
Product Details | |
|---|---|
| Brand | Parts Express |
| Part Number | 073-143 |
| UPC | 848864060378 |
| Unit of Measure | Each |
| Weight | 0.11 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category