NANNANUK 950 Waterproof Hard Case with Custom Foam for DJI Phantom 4 RTKP14388194NAN-950S-080BK-0A0-15631https://cdnimages.opentip.com/full/NAN/NAN-950S-080BK-0A0-15631.jpgNANUK 950 Waterproof Hard Case with Custom Foam for DJI Phantom 4 RTK Interior (L x W x H): 20.5 X 15.3 X 10.1\" Exterior (L x W x H): 22.8 X 18.3 X 11.7\" Waterproof (IPX7), dustproof (IP6X) & MIL-SPEC certified Lifetime warranty & 30-day satisfaction warranty Airline check-in: Yes Airline cabin carry-on: No About the NANUK 950 Hard Case for DJI Phantom 4 RTKThis case fits all DJI Phantom models including 3, 4 Pro, 4 Pro +, 4 Pro + 2.0 and 4 RTKBuilt to organize, protect, carry and survive tough conditions, the NANUK 950 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK\'s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.The NANUK 950 DJI Phantom drone case saves you time. It\'s big enough that you can keep your propellers on the Drone and still has enough room to fit the prop guards in a side pocket. The custom foam was made for the DJI Phantom 4 but will also fit the DJI Phantom 2 and Phantom 3, Phantom 4, 4 Pro, 4 Pro+, and 4 RTK.This case is military grade and made for professional use. Never worry about extreme vibration or or dropping your Phantom during travel again. Made from the light but ultra-strong NK-7 resin, the NANUK 950 is our largest case made to fit multipleDJI Phantom drone models and all accessories you need for your next professional shoot or 3D mapping. The maximum level of protection for DJI Phantom Drones and accessories in a custom-designed protective case.The high-quality, closed cell foam is pre-cut to specifically organize and protect Phantom drones and accessories. The clever design holds the aircraft, four (4) batteries, one (1) controller, 1 display (iPad mini), and smaller charging or storage accessories securely. Built for professional photographers, videographers and drone pilots of all kinds, the NANUK 950 for DJI Phantom drones is trusted to protect and to withstand all kinds of abuse so your gear doesn\'t. Professionals trust NANUK to protect their valuable gear.The NANUK 950 DJI Phantom drones protective case comes with a soft grip and ergonomic handle to make it comfortable and easy to transport.It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This protective case is also equipped with an automatic pressure release valve and two stainless steel reinforced eyelets that can be used to secure padlocks. This MIL-Spec injection molded case is backed by a lifetime warranty to keep your gear safe for your next shoot or search and rescue mission.Specifications Interior (LxWxH) 20.5 X 15.3 X 10.1\"521 x 389 x 257 mm Exterior (LxWxH) 22.8 X 18.3 X 11.7\"579 x 465 x 297 mm Lid Depth 2.1\" | 53 mm Base Depth 8.0\" | 203 mm Internal Volume 3168 cu.in | 1.83 cu.ft | 51.0 L Weight (empty) 15.1 lb | 6.8 kg Temperature Range Min -20°F (-29°C ) | Max 140°F (60°C) Material Lightweight NK-7 resin Max buoyancy 110.0 lb | 49.9 kg Padlock Holes Diameter 0.340\" Handle height from ground 32\" | 37.5\" Airline carry-on No* *Check with your airline carrier before travelling.Download PDF SpecSheet950 NANUK 2D Drawing (PDF)950 NANUK Spec Sheet (PDF)950 NANUK Spec Sheet fr (PDF)950 NANUK Cubed Foam (PDF)950 NANUK Custom Foam (PDF)950 NANUK DJI Fiche Technique (PDF)950 NANUK Padded Divider (PDF)950 NANUK Panel Kit Upper (PDF)950 NANUK Printing Template (PDF)1438819466636503368034.9100lbs0.000.000.00
About the NANUK 950 Hard Case for DJI Phantom 4 RTK
This case fits all DJI Phantom models including 3, 4 Pro, 4 Pro +, 4 Pro + 2.0 and 4 RTK
Built to organize, protect, carry and survive tough conditions, the NANUK 950 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK's exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 950 DJI Phantom drone case saves you time. It's big enough that you can keep your propellers on the Drone and still has enough room to fit the prop guards in a side pocket. The custom foam was made for the DJI Phantom 4 but will also fit the DJI Phantom 2 and Phantom 3, Phantom 4, 4 Pro, 4 Pro+, and 4 RTK.
This case is military grade and made for professional use. Never worry about extreme vibration or or dropping your Phantom during travel again.
Made from the light but ultra-strong NK-7 resin, the NANUK 950 is our largest case made to fit multipleDJI Phantom drone models and all accessories you need for your next professional shoot or 3D mapping. The maximum level of protection for DJI Phantom Drones and accessories in a custom-designed protective case.
The high-quality, closed cell foam is pre-cut to specifically organize and protect Phantom drones and accessories.
The clever design holds the aircraft, four (4) batteries, one (1) controller, 1 display (iPad mini), and smaller charging or storage accessories securely. Built for professional photographers, videographers and drone pilots of all kinds, the NANUK 950 for DJI Phantom drones is trusted to protect and to withstand all kinds of abuse so your gear doesn't. Professionals trust NANUK to protect their valuable gear.
The NANUK 950 DJI Phantom drones protective case comes with a soft grip and ergonomic handle to make it comfortable and easy to transport.
It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This protective case is also equipped with an automatic pressure release valve and two stainless steel reinforced eyelets that can be used to secure padlocks. This MIL-Spec injection molded case is backed by a lifetime warranty to keep your gear safe for your next shoot or search and rescue mission.
Specifications
Interior (LxWxH) 20.5 X 15.3 X 10.1" 521 x 389 x 257 mm
Exterior (LxWxH) 22.8 X 18.3 X 11.7" 579 x 465 x 297 mm
Lid Depth 2.1" | 53 mm
Base Depth 8.0" | 203 mm
Internal Volume 3168 cu.in | 1.83 cu.ft | 51.0 L
Weight (empty) 15.1 lb | 6.8 kg
Temperature Range Min -20°F (-29°C ) | Max 140°F (60°C)
Material Lightweight NK-7 resin
Max buoyancy 110.0 lb | 49.9 kg
Padlock Holes Diameter 0.340"
Handle height from ground 32" | 37.5"
Airline carry-on No*
*Check with your airline carrier before travelling.
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item