skip to footer block
NAN NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl P14388050NAN-920S-080BK-0A0-21172 https://cdnimages.opentip.com/full/NAN/NAN-920S-080BK-0A0-21172.jpg NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl Interior (L x W x H): 15 X 10.5 X 6.2\" Exterior (L x W x H): 16.7 X 13.4 X 6.8\" Waterproof (IPX7), dustproof (IP6X) & MIL-SPEC certified Lifetime warranty & 30-day satisfaction warranty Airline check-in: Yes Airline cabin carry-on: Yes About the NANUK 920 Hard Case For DJI™ Mavic Mini 2 Smart Controller* Does not fit the new DJI?™? RC Pro Remote Controller.Built to organize, protect, carry and survive tough conditions, the NANUK 920 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system.With NANUK\'s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.This compact, yet ultra-durable, case features a pre-cut protective foam to protect your DJI™ Mini 2 Fly More Drone Combo and Smart Controller.It offers custom compartmentalized protection for the aircraft, the remote controller, the smart controller, three (3) additional Intelligent Flight batteries, the two-way charging hub, wires, spare propellers and charging accessories.The interior of the lid features soft, cushioned foam to keep the contents firmly in place and organized when the case is being transported. Photographers, videographers, drone pilots and enthusiasts trust NANUK to protect their most valuable gear.The NANUK 920 For DJI™ Mini 2 Fly More & Smart Controller waterproof protective case comes with a soft grip and ergonomic handle to make it easy to transport.It also features stainless steel hardware and an integrated handle stay to keep the handle out of harm\'s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and two reinforced metal eyelets accommodate TSA-accepted case locks.This MIL-Spec injection molded case is backed by a lifetime warranty.Specifications Interior (LxWxH) 15 X 10.5 X 6.2\"381 x 267 x 157 mm Exterior (LxWxH) 16.7 X 13.4 X 6.8\"424 x 340 x 173 mm Lid Depth 2.1\" | 53 mm Base Depth 4.1\" | 104 mm Internal Volume 977 cu.in | 0.56 cu.ft | 16 L Weight (empty) 5.1 lb | 2.3 kg Temperature Range Min -20°F (-29°C ) | Max 140°F (60°C) Material Lightweight NK-7 resin Max buoyancy 40 lb | 18.1 kg Padlock Holes Diameter 0.300\" Airline carry-on Yes* *Check with your airline carrier before travelling.Download PDF SpecSheet920 NANUK Spec Sheet (PDF)920 NANUK Spec Sheet fr (PDF)920 2D technical drawings (PDF)920 ALUMINIUM BEZEL PLATE BOTTOM (PDF)920 ALUMINIUM BEZEL PLATE TOP (PDF)920 LEXAN BEZEL PLATE BOTTOM (PDF)920 LEXAN BEZEL PLATE TOP (PDF)920 NANUK Cubed Foam (PDF)920 NANUK Custom Foam (PDF)920 dji Mavic spec sheet (PDF)920 NANUK padded divider (PDF)920 NANUK Printing Template (PDF) 14388050 666365036865 11.4500lbs 0.00 0.00 0.00
NANUK
224.95 2025-04-28 In Stock
  »  
  »  
  »  
  »  
  »  
  »  

NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl - Black

Brand NANUK
Shop more from NAN
UPC: 666365036865
SKU: NAN-920S-080-1
Price:
$224.95& this item ships for FREE Shipping. Details
Color: Black
Quantity:
In Stock
*  Shipping Note: Usually ships within 3 to 4 days.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back

Product Description

Free Shipping Promotion
This item qualifies for free shipping within US 48 states. Details.

  • Interior (L x W x H): 15 X 10.5 X 6.2"
  • Exterior (L x W x H): 16.7 X 13.4 X 6.8"
  • Waterproof (IPX7), dustproof (IP6X) & MIL-SPEC certified
  • Lifetime warranty & 30-day satisfaction warranty
  • Airline check-in: Yes
  • Airline cabin carry-on: Yes

    • NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl


About the NANUK 920 Hard Case For DJI™ Mavic Mini 2 Smart Controller



NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl

* Does not fit the new DJI?™? RC Pro Remote Controller.

Built to organize, protect, carry and survive tough conditions, the NANUK 920 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system.

NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl

With NANUK's exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

This compact, yet ultra-durable, case features a pre-cut protective foam to protect your DJI™ Mini 2 Fly More Drone Combo and Smart Controller.

It offers custom compartmentalized protection for the aircraft, the remote controller, the smart controller, three (3) additional Intelligent Flight batteries, the two-way charging hub, wires, spare propellers and charging accessories.

The interior of the lid features soft, cushioned foam to keep the contents firmly in place and organized when the case is being transported. Photographers, videographers, drone pilots and enthusiasts trust NANUK to protect their most valuable gear.

NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl

The NANUK 920 For DJI™ Mini 2 Fly More & Smart Controller waterproof protective case comes with a soft grip and ergonomic handle to make it easy to transport.

It also features stainless steel hardware and an integrated handle stay to keep the handle out of harm's way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and two reinforced metal eyelets accommodate TSA-accepted case locks.

This MIL-Spec injection molded case is backed by a lifetime warranty.

NANUK 920 Waterproof Hard Case with Custom Foam Insert for DJI MAVIC Mini 2 Smart Ctl

Specifications

  • Interior (LxWxH) 15 X 10.5 X 6.2"
    381 x 267 x 157 mm
  • Exterior (LxWxH) 16.7 X 13.4 X 6.8"
    424 x 340 x 173 mm
  • Lid Depth 2.1" | 53 mm
  • Base Depth 4.1" | 104 mm
  • Internal Volume 977 cu.in | 0.56 cu.ft | 16 L
  • Weight (empty) 5.1 lb | 2.3 kg
  • Temperature Range Min -20°F (-29°C ) | Max 140°F (60°C)
  • Material Lightweight NK-7 resin
  • Max buoyancy 40 lb | 18.1 kg
  • Padlock Holes Diameter 0.300"
  • Airline carry-on Yes*

*Check with your airline carrier before travelling.

Download PDF SpecSheet
920 NANUK Spec Sheet (PDF)
920 NANUK Spec Sheet fr (PDF)
920 2D technical drawings (PDF)
920 ALUMINIUM BEZEL PLATE BOTTOM (PDF)
920 ALUMINIUM BEZEL PLATE TOP (PDF)
920 LEXAN BEZEL PLATE BOTTOM (PDF)
920 LEXAN BEZEL PLATE TOP (PDF)
920 NANUK Cubed Foam (PDF)
920 NANUK Custom Foam (PDF)
920 dji Mavic spec sheet (PDF)
920 NANUK padded divider (PDF)
920 NANUK Printing Template (PDF)

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
0 reviews
Be the first to review this item!
Write a Review