skip to footer block
JRA Pro tools 5503 1HM1 M528PT Pump 90psi 5.0gpm Transfer Pump 110v P12132230JRA-150-08572 https://cdnimages.opentip.com/full/JRA/JRA-150-08572.jpg Pro tools 5503 1HM1 M528PT Pump 90psi 5.0gpm Transfer Pump 110v Manufacturer Part Number: 5503-1HM1-M528PTQuick OverviewQuality Pump for Water and ChemicalsAble to run DryCapable of continuous operation below 30psi pressureChemical Resistant Components Rated for SH Transfer 50 Gallons in 17 Minutes or lessPump 90psi 5.0gpm Transfer Pump 110vTransfer Pump for Water, SH (Sodium Hypochlorite, Bleach), Detergent Mixes, Non Flammable FluidsUsed Transfer chemicals from One Tank to another TankFeatures1/2 in. slide portsCapable of running dryDemand pump @ 90psi Max110v permanent magnet motor weather sealed pump6ft long Power Cord with 3 Prong Grounded Plug Totally enclosed non-ventingThermally protectedThis pump is meant to be used at lowers pressures moving water, SH, Chemical Batches from one tank to another.Useful for:Loading RO or purified Water into a Delivery Tank on a VehicleLoading SH (Bleach) from an on property storage tank to the Tank on a Service VehicleLoading a Premixed or Mixing a Batch of Chemical mix onto a service vehicle from multipe on site Tanks.Flow at 20psi 40psi 60psi 80psiGPM 4.5 3.5 3.0 2.9 gpmNSF Rated Standard 58Thermally protected motor, at a typical flow rate of 3 Gallons per minute though a 1/2 inch ID hose (or Larger) and at 30PSI this pump will run continuously and transfer 50 Gallons in about 17 minutes.However through a smaller hose (5/16in or smaller ID) and running at a higher pressure of 70psi this pump will run about 8 minutes and only flow 2.9 gallons per minute or about 23 gallons of product before thermally shutting down, 1/2 inch ID Hose or Poly Tube is recommended for continuous use, with a Minimum 3/8in ID Hose to extend pump longevity.The motor required 40 minutes of cooling time before running again.DOES NOT INCLUDE HOSE FITTINGS: Please refer to the fittings displayed in the addons sectionSlide Port Fittings allow for easy Pump removal, This could be to bring it in out of the weather or to allow for movement of the pump from on Tank Station to another Station or if the pump needs to be replaced for other reasons.Additional InformationColorBlackMaterialPlasticPlumbing Ends1/2in Hose Barb, 1/2in Pushfit FemaleVoltage110/120 VoltRating5.0gpmPackagedIndividual 12132230 9.0000lbs 0.00 0.00 0.00
Pro tools
164.8200 2025-05-09 5 In Stock
  »  
  »  
  »  
  »  

Pro tools 5503-1HM1-M528PT Pump 90psi 5.0gpm Transfer Pump 110v

Brand Pro tools
Shop more from JRA
SKU: JRA-150-08572
Price: $164.82
Quantity:
5 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 5503-1HM1-M528PT

Quick Overview

  • Quality Pump for Water and Chemicals
  • Able to run Dry
  • Capable of continuous operation below 30psi pressure
  • Chemical Resistant Components Rated for SH
  • Transfer 50 Gallons in 17 Minutes or less

Pump 90psi 5.0gpm Transfer Pump 110v

Transfer Pump for Water, SH (Sodium Hypochlorite, Bleach), Detergent Mixes, Non Flammable Fluids

Used Transfer chemicals from One Tank to another Tank

Features

  • 1/2 in. slide ports
  • Capable of running dry
  • Demand pump @ 90psi Max
  • 110v permanent magnet motor weather sealed pump
  • 6ft long Power Cord with 3 Prong Grounded Plug
  • Totally enclosed non-venting
  • Thermally protected


This pump is meant to be used at lowers pressures moving water, SH, Chemical Batches from one tank to another.

Useful for:

  • Loading RO or purified Water into a Delivery Tank on a Vehicle
  • Loading SH (Bleach) from an on property storage tank to the Tank on a Service Vehicle
  • Loading a Premixed or Mixing a Batch of Chemical mix onto a service vehicle from multipe on site Tanks.


Flow at 20psi 40psi 60psi 80psi

GPM 4.5 3.5 3.0 2.9 gpm

NSF Rated Standard 58

Thermally protected motor, at a typical flow rate of 3 Gallons per minute though a 1/2 inch ID hose (or Larger) and at 30PSI this pump will run continuously and transfer 50 Gallons in about 17 minutes.

However through a smaller hose (5/16in or smaller ID) and running at a higher pressure of 70psi this pump will run about 8 minutes and only flow 2.9 gallons per minute or about 23 gallons of product before thermally shutting down,

1/2 inch ID Hose or Poly Tube is recommended for continuous use, with a Minimum 3/8in ID Hose to extend pump longevity.

The motor required 40 minutes of cooling time before running again.

DOES NOT INCLUDE HOSE FITTINGS: Please refer to the fittings displayed in the addons section

Pro tools 5503-1HM1-M528PT Pump 90psi 5.0gpm Transfer Pump 110v

Pro tools 5503-1HM1-M528PT Pump 90psi 5.0gpm Transfer Pump 110v

Slide Port Fittings allow for easy Pump removal, This could be to bring it in out of the weather or to allow for movement of the pump from on Tank Station to another Station or if the pump needs to be replaced for other reasons.

NOTE: Price is only for Model #: 150-08572

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
0 reviews
Be the first to review this item!
Write a Review